Ford F-550 Mini Pumper, Earl Twp. | 911 RR & Vengeant Apparatus

Рет қаралды 26,370

Күн бұрын

Built 100% in house, looking for a new piece of apparatus call us today at 717-473-3843 or vengeantapparatus.com
Ford F550 4x4 mini pumper. 1,200 GPM pump, 300 gallon water, 15 gallon foam, air pack seats, tool mounting, air bags, extruded aluminum body and much more.

Пікірлер: 37

@SammyMaggio 3 жыл бұрын

Vengeant Apparatus is one elite company now. Another phenomenal install, boys!

@Carterthielftw_ 3 жыл бұрын

Vengeant knows no limits... those V series Ions on the front is pretty cool, getting wider warning then a normal ion

@V1AbortV2 3 жыл бұрын

Great build-up guys! Mark, you’re the man dude! 🇺🇸👊😎

@PTRRanger951 Жыл бұрын

Amazing build. I am trying to spec out what I would want on a truck like that and I would add a few couple things. I would have a tray that goes across the cross lays that would hold like two backboards and a basket. I think that would use that space right there very well. Can even make it flip up, so when relaying the hose it can flip to a 90* angle towards the cab to allow easier access. But it’s really unused space right there. Would also add 6 of the M7 lights to the back so it flashes 2 on one side against 1 on the other with the middle mounted ones acting as stop and tail. Just like on some ambulances. Would flash warning but when brakes are applied they go steady to give more notice of braking instead of only two at the bottom getting lost in a sea of flashing. Would also use the Traffic advisor with the center stop / tail built into it for a high mounted stop light. If the IONs had to be used, I would make the middle one red to act as the high mounted stop. Would also add grab handles on the side of the hose bed to prevent the hoses from being pulled along the finished edge / paint. I would also use a longer handle near the truck cab for the same purpose. To protect the hose from hitting the paint on the cab, as well as an edge protector on the body by the pump panel to prevent it from being dragged across the edge. I know it doesn’t happen very often, but it only takes one time of someone not paying attention or pulling hose in a less than ideal tight area to create some friction rubs on paint. I would use M7s on the fenders and above the rear wheel, but use the V series in amber with the white scene to act as a turn signal and puddle lamp above the rear wheel. Programmed so anytime the headlights are on and vehicle is in park, the puddle lamp comes on, and then scene with scene. If the tray above the cross lays isn’t wanted, I would use the space above the roll up doors, in the back like you have the pole and suction storage put a door above the M7s that would serve as backboard storage, unless it would make it too structurally unsound right there. If that was the case I would want the box a few inches taller. Only issue I can see with that truck is that pin to hold the backboard getting bent when a hose is pulled over time and making it so the pin can’t be pulled easily. A seatbelt strap with Velcro or a clip would have been useful in that application. Just my ideal build, but if you guys use any of my ideas in the future, credit me lol.

@Goober10584 3 жыл бұрын

Excellent lighting package, flash pattern choice and sync. Very effective setup in that regard. I'd like to see a full install video one day as far as mounting and wiring the lighting equipment.

@EBMisKing 3 жыл бұрын

Great job as always

@longviewstud26 3 жыл бұрын

Great looking truck

@rb3715 Жыл бұрын

Great multipurpose vehicle......dont like the pin holding the backboard...... could interfere with LDH load....

@patrickdolan7211 3 жыл бұрын

only bad thing i see about this is the pin for the backboard. laying in with 5" or 3" could snag or bend the pin and then it will get stuck. other that that it's an extremely solid build

@911RapidResponse 3 жыл бұрын

So we actually tested this. It passes by with no issues.

@patrickdolan7211 3 жыл бұрын

@@911RapidResponse oh nice. good work

@hebachem 3 жыл бұрын

What kind of gross weight is the unit sitting at? Dept will load another 1000ish pounds of equipment, plus water weight, and personnel. At final stage it would be near the 19.5k gvwr. Either way very clean and simple, the recessed light tower is a life saver for old stations.

@dennisbrill5336 3 жыл бұрын

Very nice, needs a Q on the bumper........ 👍

@chandrachurniyogi8394 Жыл бұрын

can you armour the vehicles as well???

@cfol1382 3 жыл бұрын

I must have missed it, but what’s the tank size on this, 300 gallons?

@mrpadilla1255 Жыл бұрын

Can you be able to give me a built sheet and cost sheet for this mini pumper?

@theopinions47 2 жыл бұрын

Where’s the 🪜 ladders? Could use a little giant.

@TadTrueman 3 жыл бұрын

What’s the black switch on the console for? The one marked RED/OFF/WHITE.

@PTRRanger951 Жыл бұрын

Probably figured it out by now. But they have dome lights in the headliner you can see at the end of the video. So it’s probably for the red and white of the dome lights.

@ff32179 3 жыл бұрын

Remolded/remanufactured tires????

@jeffpitoniak 3 жыл бұрын

Tailpipe exhaust right next to the absorbent dump not a good idea.

@EnjoyFirefighting 3 жыл бұрын

How can a apparatus this long be spec'ed only as Mini Pumper? It has a longer wheelbase than our full-size Rescue Engine which has a cab designed for a crew of 9 ...

@EricWhiteTheGamer 3 жыл бұрын

Depends on the tank and amount It holds I believe.

@justanotheraviator2357 3 жыл бұрын

It's on a Ford pickup truck

@EnjoyFirefighting 3 жыл бұрын

@@justanotheraviator2357 so?

@justanotheraviator2357 3 жыл бұрын

@@EnjoyFirefighting that's what makes it mini, it's a small truck. Other than that I don't have anything

@theopinions47 2 жыл бұрын

No winch, that could be a wish you had moment,