Ford F150 How to. Check Fuel Fill Inlet P0457 Check Engine Light DIY using my Snap On Solus Ultra

[@tylerwilcox2656]

You are my man! I just bought this truck and I had that issue come up with the warning light and then yesterday it went into check engine I got real nervous because I literally bought it within the last 48 hours … I Research a lot of different versions of this concern but I really want to say yours is very simple and it fix my issue immediately Thanks. That’s what KZbin is for!

[@shanersmechaniclife3164]

Thanks for the great comment, glad I could help and that it fixed your problem. How do you like the truck now that you've driven it a while?

[@platinummoet2903]

Same on my 011 i’ve had a few Inlet warning for about two or three days and now my engine light was on when I woke up this morning

[@1988texasaggie]

Thanks! Just followed the steps and resolved the fuel inlet message.

[@dennisneill1610]

Thank you for the info ☘️

[@shanersmechaniclife3164]

No problem. Thanks for watching and commenting.

[@deniserodgers8201]

Thanks for the great information

[@shanersmechaniclife3164]

No problem. Glad you found it helpful. Not every problem needs a lot of money to fix. Some are even free.

[@whitefriars13]

Great video THANKYOU 👍☘️

[@davidmenchaca275]

Good advice thanks

[@shanersmechaniclife3164]

You're welcome. Thanks for watching and commenting.

[@johnlhughes1260]

Man your good. It work for me. Thanks

[@shanersmechaniclife3164]

Thanks for the comment, I really enjoy hearing that my videos help people. Thanks for watching.

[@brianjones4697]

Very helpful thanks a bunch !!

[@NinthDensity]

Great info, thanks.

[@shanersmechaniclife3164]

No problem. Thanks for watching.

[@mauriciosandoval4482]

I gotta tell you charge a lot for simple things and you do everything so properly and you overcharge.

[@flossie713]

Thnx!

[@shanersmechaniclife3164]

Your welcome. Thanks for watching.

[@JamesMcLaughlin-pg8ud]

You the man.

[@futuredread113]

Ok thanks

[@trey90987]

Can this still work if you don’t have the tool to clear the code after cleaning & doing everything you said in the video ?

[@shanersmechaniclife3164]

Yes it can work. If you fix the problem, eventually, the light will go out. You can also swing by some parts places. Some will scan and clear codes. Hope it works for you. Keep me posted.

[@evangelistevenswpierre8687]

Thank you bud

[@shanersmechaniclife3164]

No problem. The tip is a quick little thing you can try before you have to take it to a shop.

[@Drone_Addict_]

I do not think you should use high-pressure air into the gas tank only because it could cause static and that would not be good. Low pressure air maybe but not high pressure. But as far as everything else very helpful thank you.

[@johnlhughes1260]

Dam your good.

[@shanersmechaniclife3164]

Thanks for watching and the positive feedback.

[@marvinmoses5784]

Thanks so much for showing me what to do if fuel fill inlet comes back on what if I don't have compressed air at my house, can I still used W D 40 and a clean rage to clean and wipe around gas neck and gas door

[@shanersmechaniclife3164]

Cleaning best as you can should hopefully work. Main thing you want to be careful of is not getting dirt into the system. Let me know how it works. Thanks for watching and commenting.

[@Mbsoriginal]

Does this apply to the mustang as well? I have a 2019 with the same problem.

[@shanersmechaniclife3164]

Yes, most of the Fords have the same system. Thanks for watching.

[@THEE_KaiszerSozae]

same. 2019 GT and mine came on for the first time ever

[@seasonschultz5700]

Hello! I just did everything you said but error code and engine light is still on. Just curious if the error code will clear itself when the engine test runs or do I have to have a shop do it?

[@shanersmechaniclife3164]

If that fixed the problem, eventually, the light should go out unless you have other leaks. I hope it works out for you. Keep me posted. Thanks for watching.

[@AliceAnna-h7y]

What other problems could it be if that is not the problem

[@shanersmechaniclife3164]

Could also be a leak anywhere in the evap system. Hope you get your problem figured out. Let me know what you find. Thanks for watching.

[@KingDJ513]

Mine is every time I turn my vehicle on will it work for thay also ?

[@shanersmechaniclife3164]

You can't go wrong with a little maintenance to start the troubleshooting process. Let me know how it works out for you. That warning can come on with any leak in the evap system. That's a lot of parts, seals, and lines. Thanks for watching and commenting.

[@carsonhunter8599]

Would this cause it to not start/have a really hard time starting up?

[@shanersmechaniclife3164]

If your purge valve is stuck open, it can give you that warning also. Could be sucking gas vapors in engine when not supposed to. Let me know what you find.

[@falconwng]

What diagnostic tool are you using?

[@shanersmechaniclife3164]

I'm using the Snap-On Solus Ultra. I have since traded it in on a Snap-On Modis Edge

[@FishingInColumbusOH]

Can you clear a code with out a scanning tool?

[@Ryanbirkholtz]

If you get forscan, a laptop, and a forscan obd2 connector, you don't need one

[@robbie0517]

I'm getting the message with no code

[@shanersmechaniclife3164]

Could be the same problem but not as big of a leak. Can't go wrong with checking the fuel fill Inlet. With most issues I always check maintenance items first. Let me know how it works out for you. Thank for watching.

[@JorgeRuiz-sc3um]

Whats the name of the sprey?

[@shanersmechaniclife3164]

It's called Rost Off. It's the WD40 equivalent from a company called Wurth.

[@nightplayerzz]

I do a clear code ; hope don’t come again

[@shanersmechaniclife3164]

A lot of the time I clear a code and see if it comes back before I start diagnosing.

[@nightplayerzz]

@@shanersmechaniclife3164 perfect ; so if it’s back I should check what could be

[@marcelpage3393]

In turned on after that. Lol

[@shanersmechaniclife3164]

Well, that's not good. Hopefully, you get it figured out. Thanks for watching.