Ford focus 1.0 ecoboost engine aftermarket pistons assembling episode 1#

Hi everybody
On this video I am working on ford focus 1.0 ecoboost engine, there was a damage on piston cylinder 1. It's common failure on this engine. I bought new pistons from ebay, the cylinder diameter is 72mm. The pistons are aftermarket made so you need to check the pistons before installation on cylinder block. I have tested before, they are ok.
Thanks for watching Subscribe for more videos

[@jirisohr3267]

Ok, next step, move the piston left to right, after installation, up and down, check the clearance manually. The visual display in the video is nice, however, it is necessary to try out non-standard movements of the piston and connecting rods during assembly, it will help others. Try it.

[@alancraigie7951]

Thank you my friend. Great video. 👍

[@hamadakhmechanic6526]

Thanks for watching

[@mokhtarbachir3601]

Hello, what are the torque specs you used for the piston rods bearings an krankshaft bearings. New bolts or not ? Thanks

[@hamadakhmechanic6526]

I didn't use torque because I didn't find the specs

[@incog333]

If the pistons are fitted with arrows facing the timing belt isn't it important to also assemble the con rods to the pistons the correct way round? I.e. so that the con rod markings face the right way after assembly to the crankshaft?

[@emililiev6699]

Pistons Std,no noise after starting engine?

[@hamadakhmechanic6526]

Std size, there was no noise

[@emililiev6699]

@@hamadakhmechanic6526 Thanks, what brand are the pistons and bearings?

[@hamadakhmechanic6526]

Hallå där, kolla in ET ENGINETEAM Kolv i AUTODOC-appen m.autodoc.se/et-engineteam/14089911

[@emililiev6699]

Why did you change the pistons? were there any sounds (knocking) with the old pistons? I am in a dilemma, should I put standard pistons or repair ones.

[@hamadakhmechanic6526]

@@emililiev6699 because of knocking sound, pistons was damaged.