Ford Transit Custom 2.2 P200200:EC Particulate Filter Efficiency & P244C:00-28 DPF Temperature

diagnostic tests on a blocked dpf with some other faults relating to a P2002 low pressure efficiency code & P244C exhaust temperature too low.
for repair bookings email [e-mail]
Launch UK products used in the video are available at www.launchtech.co.uk
my official kingbolen diagnostic tools affiliate link is... kingbolentool.com/?ref=iq39r3l2

[@StephenBrown-ti6mm]

You just saved that customer a small fortune if they had gone to a main dealer they would have been stumped and thrown lots of new parts after 5 or 6 visits with no success. (looks like we are in for further education from O"rileys Autos in 2024)👍

[@thindo]

Nice to see Launch UK give you a Xmas present you have more than earned it over the past Year 👍👍👍

[@ORileysAutos]

They are good guys

[@jasonselfe202]

Jimmy you are the honest mechanic we all strive to find & can honestly trust to fix ALL problems needed without ripping anyone off. A rare breed to find. I try to do most of my own diagnostics/repairs with the help of the internet so I thank you for your excellent videos & sharing of your wealth of knowledge. Keep up the great work 👍

[@1954307]

brilliant job as normal jimmy, nice to see an honest mechanic do his trade, the problem with all garages 1 they dont know what they are doing 2 all they are interested in is getting paid fixed or not 3 most of the time they will get one of there apprentices on the job unsupervised, and they dont know what they are doing aswell 4 apprentice or mechanic cannot be bothered to put the parts back on correctly, but thank god there are people like you around.. i would have thought jimmy you might have had a secondhand glow plug in your van and a quick change on cylinder 4, i think maywell have been appreciated...

[@ORileysAutos]

Customer didn't want to spend the money on Glow plugs. It's not a quick change on these. Manifold and egr need to be removed first

[@1954307]

ah didnt know that ....@@ORileysAutos

[@stuartmecham]

i always find these videos fascinating

[@derekmillar318]

Always an education...brilliant....

[@BoysFeetFun]

We are all becoming mobile mechanic experts with a speciality in dpf.

[@RogerM88]

I recently took out a DPF from a Corsa, and was surprised the about of back pressure it generates even after cleaning. No wonder it had to replace the turbo some moths earlier as some noticeable blow by coming from the pcv valve.

[@martinwilson6815]

Enjoyed that Jimmy, thanks for sharing.

[@miketherefurbisher8000]

Excellent as usual Jimmy!! I hope it's a great year for you. "thanks" ☘👍

[@stuartc6811]

Congratulations jimmy another job well done The efforts you go to for your customers I do hope they are grateful happy new year to you 🎉

[@ORileysAutos]

I hope so too

[@andrewgallier6452]

fantastic informational videos great work thank you

[@ORileysAutos]

Glad you enjoyed it

[@angelamcmahon]

Well done, nothing worse than breaking down!

[@stevenkerry3101]

great work Jimmy and hope you have a prosperous new year .

[@ORileysAutos]

Thanks, you too!

[@TheCack1000]

The 🤴has did it again✊️

[@DelticEngine]

Many thanks for such a helpful and informative video, Jimmy! Actually, I'm also really happy because this video also happened to be posted on by birthday! Love your content and wish you the very best for 2024.

[@ORileysAutos]

You're very welcome!

[@neo7941]

Respect mate, you know what you do. Great job 👌🏻👍🏻🫡

[@ORileysAutos]

Thanks 👍

[@JoseSilveira-newhandleforYT]

Another superb and very responsible job, Jimmy! Well done!

[@ORileysAutos]

Many thanks!

[@JoseSilveira-newhandleforYT]

@@ORileysAutos 👍

[@anonamouse9198]

Superhero! You should wear an O’Rileys cape in every video 🫡 it’s a miserable life for sure when your work vehicle doesn’t work. 😢

[@stuart6973]

Brilliant video 👍🏻

[@marksenior9220]

Great detailed video. Glad you got some freebies from launch especially the amount of cash you spend on their products.

[@ORileysAutos]

Thanks for watching!

[@mikeberry304]

Nice one Jimmy, very well explained, so many in our job need to learn from your videos and fix these problems country wide , rather than the loonies smashing out the middle and then delete it which is the wrong way, your very knowledgeable in your field and a credit to use all ❤💪👏👏👏

[@ORileysAutos]

Thanks 👍

[@waynebrinkley6284]

Happy new year Jimmy, love these videos. First class job as always. How are you rating the k10 so far??

[@steveone9375]

Great job

[@SimonJones-sl5jl]

Hi Jimmy, I’m always impressed by your knowledge and straight forward approach to getting a problem sorted, oh how I wish you weren’t so far away. I use a 15 plate 2.2 Transit Custom with 110k on the clock for local journeys, I have no faults as such but it seem to be trying to re gen quite often given how few miles I do, do you think it would it be wise to do a Launch dpf clean as maintenance as opposed to cure?? Thanks for the videos, keep up the good work, Simon

[@autisticdrone.]

👍 Very interesting video.

[@BlakeCDS]

Hi Jimmy is it the pre or post DPF line on the sensor that you pressurise for the test?

[@chox2001]

What’s the difference in price supply and fit new parts to trying to save customer some money.

[@thaireesj41]

What manometer do you use? Thanks. 😊

[@MrAI831]

Jimmy, what do you think about DPF & Exhaust cleaner additives similar to the fuel injector cleaners gasoline additives? Will they work like the spray gun cleaner? I currently have a 2020 RAM 2500 showing an Exhaust Pressure of 100 kPa. The truck still runs great but has the check engine light on.

[@davidfernley7372]

Isnt the engine light still on at the end Jimmy?

[@careyautorepairs]

That sensor turned into snoop dogg at 14:12 ha ha.

[@toafy1014]

Aftermarket sensors really aren’t worth the trouble, will not and would never use them again, spent time before chasing my tail due to duff “new” sensors.

[@laurencelawton3653]

I have a 2.2 transit custom 2015 that have been to three garages and all 3 have put new injectors seals in it but very time a month or so later the smoke starts again and the pressure in the oil cap pushing the oil out everywhere. Could this dpf filter thing be making the back pressure to push the injectors loose . Not sure if they're getting any code but no light on the dash

[@Struckgold]

Hey Jimmy, any chance you could do a DPF clean with one of those one-and-done pressurized cans with cleaning foam in them?

[@BoysFeetFun]

I seen those on Amazon look quite good. Jimmy has a deal with Launch UK so always uses same equipment. It works.

[@BarryHolden-ps4ej]

Hi Jimmy where did you get the tapered conical end for your launch hose

[@exgtt2061]

You can get them on Google - put in “Tapered conical end for launch hose” You’re welcome

[@ORileysAutos]

www.fivestarautomotive.co.uk/product/jlm-diesel-dpf-replacement-hose-conical-nozzle/

[@BarryHolden-ps4ej]

Thank you ,its much appreciated !@@ORileysAutos

[@m73zoli]

Hello! The dpF filter was replaced with an aftermarket one, and the Vaporizer unit was replaced twice. The repair was done at an official Ford service. However, when it comes to regeneration, very strongly from smoke or the end is low temperature. But sometimes the temperature reaches 550C" - 610C", but cools down and smokes again. Maybe someone encountered a similar error? The service is clueless, or they would put the old DPF filter back. Transit Custom 2.2, 2016. Thanks in advance for your help!

[@MrByootox]

First problem I read... "Aftermarket DPF" Like aftermarket cats I find them absolute junk.

[@m73zoli]

Yes, I also reserve the right to treat aftermarket parts. but the interesting thing here is how it is when you have the temperature, from which I would think that the aftermarket filter is not necessarily at fault.@@MrByootox

[@m73zoli]

Now it was time to put back the original DPF filter. Well, that's how it turned out that the aftermarket filter can't be used. Only occasionally could it heat up above 500"C. The factory knew the right temperature right away.@@MrByootox

[@tonyford7987]

Jimmy how come the pressure sensor had only one pipe? I assume it’s only seeing the pressure of the blockage not differential either side of the DPF. I have only seen ones with 2 pipes.

[@ORileysAutos]

It's know as a DPF inlet pressure sensor.

[@johnnorth9355]

My two pennies worth - If the vehicle is your livelihood it's a false economy to cut corners and not fix all the faults. Nothing worse than suddenly finding you are going nowhere.

[@theratspap6737]

Some mechanic you pal

[@BH-tp3pm]

Issue I’m facing. Completed a full dpf clean so that I have 0 grammes of soot, pressure is spot on etc. I then told the computer I have replaced the dpf sensor. After doing all this, I have knocked my battery voltage down to like 10.98v. Now getting P2452 (dpf sensor circuit). Can someone please allow me to sleep tonight and tell me that the battery needs either replacing or at least charging to ensure the sensor is actually ok and my dpf issue is fixed and this is now and electrical issue 😅

[@danielpantazescu7720]

Is it a Ford? If so sometimes you have to generate a different dtc by disconnecting the sensor, or other and then you're able to delete the code. Put a charger on the car and reset the relearn procedure.

[@BH-tp3pm]

@@danielpantazescu7720 thanks so much for replying. It’s actually a Range Rover. I’ve never had this code before only when I told the car I have a new sensor after a full clean. I will still follow this procedure to generate a different fault and clear then run the “new dpf sensor” bit on my obd

[@hadiamrane]

@@BH-tp3pm Maybe have a battery tester on the battery and see if the battery health is ok?

[@BH-tp3pm]

@@hadiamrane thanks for your feedback. It’s on my to do list tomorrow to see what’s going on. I’ll feedback as well :) thanks so much for your reply

[@BH-tp3pm]

@@hadiamrane just to update. No issues with the car this morning. Had a good hour long drive up and down a roads, some urban and 5-10 mins motorway. No faults appeared. My only other conclusion is that the initial forced regen of the dpf caused errors in the temperature settings or something for the dpf sensor to get an accurate reading. I will continue to monitor.

[@truckermal]

🇮🇪 Ireland 🇮🇪

[@rbondy008]

Shotgun the old gun ;-)