I Build a Big CNC Machine - Homemade CNC Final Part

Hi. This is the final part of the design of my large CNC machine. Today we will align the geometry of the frame, install guides. In this part, the homemade cnc machine will be fully assembled. Enjoy watching!
Hi guys. My name is Mikhail. On this channel you will see a lot of projects on how to make something with your own hands. Projects are different, ranging from simple devices to large machines. Don't forget to subscribe and tell your friends about me.

[@4pawsforge273]

Hope you never, like ever, have to move that beast of a machine! Well done!

[@milkrecu]

Very well done. A great example of building accuracy.

[@knucklehead83]

That trick with the CD was genius!

[@Spodokamono]

What a machine, great workmanship. Thanks for sharing some fabulous accuracy tips,

[@mrohny76]

Jestem pełen podziwu dla twórcy. 👍👍

[@jooch_exe]

The sheer amount of love and effort put into this machine is commendable. Very nice setup!

[@TheMXFUN]

You have a ridiculous amount of patience…… well done 👍🏼👍🏼

[@oscarhernandez8620]

eres super bueno en lo que haces trabajando el metal , mi admiración

[@urielvargas6777]

forgive me but you did not build a home made machine you have made a beast!! great job.

[@denisstimofejevs5826]

wow, master project! RESPECT

[@kiblerjim]

Well done. Thanks for sharing!

[@homeselfmade6286]

Nice one! I would love to have one myself

[@user-ry1md7dq5k]

В шортах и майке заниматься работами со сваркой могут только любители!😆 Надеюсь расплав алюминия разливали в брезентовом, или суконном костюме. Берегите себя!

[@user-ly6en3pu7o]

WAOOOOO ITS AMAZING I NEVER SEE BEFORE

[@T0tenkampf]

The technique for aligning and squaring the rails with common shop equipment (other than the beam straightedge which isn't common) is pretty brilliant. I have been stumbling over how to do this in my garage. I also never thought to align the cross table supports to the already installed gantry and z axis assembly...that will be a real time saver. I am wondering if Mr. Craft is a Millwright to have such knowledge?

[@Dev_Everything]

Until you price the beam straight edge then your back to square one (at least I am)

[@eddiechia2611]

You guys are brilliant

[@FoxCrafts]

Thank you🙏

[@frankshannon3235]

Frankly that's magnificent. The problem for me would be that building the CNC itself might be more fun and more rewarding than what what I might ever build WITH it. One thing for sure, you're doing this because you want to, not because you need to. A Phantom Shadow is only $23,100.

[@TheAndreyBelkov]

Мистэр, великолепно😊

[@JoniPonsen13]

amazing cnc build !

[@colinfarrowdesigns4627]

well done M craft loving your machine looks supper cool and well built😀

[@Rustamka2303]

Это просто мечта ...

[@arpadlabadi5585]

this is a beast 🙂

[@arbjful]

1:06 now that is a controller I would kill for…😂😂

[@changhongmetal]

Good work!

[@KarlAlfredRoemer]

Very impressiv 👍👍👍

[@tonycordeiro5542]

trabalho perfeito !

[@graveurgraveur2691]

BRAVO!!!

[@FoxCrafts]

Thanks)

[@CoolIdeasDIY-qv1nz]

Nice work👍👍👍

[@T0tenkampf]

My build would be so much easier if I could find a deal on a nice beam straitedge like that! Is he using the CD reflection to make sure he is running the drill motor perpendicular to the plate? Thats pretty cool.

[@tomekk6674]

no word on movie, no word at comments :) great job sir :) This is not elementary book of machines... go to school ladies ;-D

[@stevenfixo]

Cool trick with the cd

[@narigasandroid]

muito bom, estou iniciando a fabricação da minha cnc plasma.

[@romanluciak2439]

Beautiful

[@user-zp2fv2id3g]

very good thanks

[@Maximow_Y]

"Что ты здесь ходишь всё вынюхиваешь" 😂

[@RuiSjm]

Congratulations, very good ! If you use hiwin linear rails results will be better!

[@laserboy49]

very nice !good job!!

[@cokecamilo]

So satisfying

[@stepanov21]

Hello my friend. Well done

[@dayan721]

Well done

[@user-qd1rv4le2g]

Fantastic video very well done using minimal tools to make it. Only concern to me is if you need to move it to a new house you will have to hack it apart to get it out lol

[@SurajKumar-hm3xs]

Great job ❤❤ super

[@bobweiram6321]

One way to check for twist is to use the two wires method with a multimeter set in continuity mode. Hook one end of one wire to the positive lead and the other to the negative lead. When the two wires touch, you'll hear a beep.

[@woodfinchcrafts7267]

Neat

[@bangboy1238]

Keren❤❤❤

[@Jptoutant]

so good

[@Maxime-ho9iv]

That’s awesome. We want to see more! What can this thing make? Also I want to know how you installed a vacuum system on this.

[@niclasbohm6286]

man i am 3 min into the video and those two hacks with the cd and the thin wire.....niiiiiice i love them

[@denifx7651]

после слов (Что ты здесь ходишь всё вынюхиваеш) я немного напрягся :D

[@user-vv4hn1ox1l]

Я тоже повелся сначала, думал ребята заграничные, но когда услышал песню (бухгалтер) 😅

[@j.a.f.8029]

Nice Video! I agree with the other comments - you do have some nice “tricks“ for the assembly. I'll have to try the CDROM method sometime. BTW: Where did you source the Spindle? Are you happy with it?

[@gyurih3270]

respect

[@jakubtrzpis2595]

The CD is a brilliant trick

[@wz8729]

You should hook a vacuum system up to the CNC.

[@mbreakn]

Асом. Амэйзинг))

[@jonathanassefa7755]

nice build....the techniques you used is clever......which type of stepper motors are you using?

[@9h0s71n1gh7]

Excellent work, I loved the CNC and it's envious, post a video of it in real work so we can enjoy this work. By the way, what was your total expense? Compared to one sold on Aliexpress, how much was the difference, besides of course the pleasure of creating it? Congratulations! I hope you make good use of it!🙂

[@user-io4sr7vg1v]

This device now owns that room because there is no possible way to remove it. Nice.

[@iggydc8034]

Yes there is, you dissasemble it and move it. Have you ever built something? If you have you would know and if not, than learn.

[@j.technical]

оо, краска от пачанов

[@somsakhua2317]

It not homemade..it factorymade

[@ricardorocha6070]

Topp

[@zenkwong5769]

Niubi!

[@yrasi80]

сделано отлично, но большой жесткости не ждите от этих направляющих.

[@robertpireyre]

great work! I would however have a question, why did you choose the rack and pinion system, rather than a ball screw system?

[@RuiSjm]

Machine too big for ballscrews, he need 25mm diameter for such length

[@ni_ko]

Хочу такой :)

[@donepearce]

When I do the crossed cord height alignment I always use two cords in one of the directions. The other crossing cord then passes between them. You can then see exactly when the heights are correct.

[@Semencool10]

Спасибо, очень познавательно! Подскажите как добивались прямого угла, между осями Х и У и Z ?

[@GnosisMan50]

Beautiful machine. If I were to build one, I’d make it so that the legs can be removed and the entire frame for that matter. This machine was apparently built in a small room which means they’re going to have trouble getting it out should they decide to move. They will most likely end up knocking down a wall. Anyway, all the best of them.

[@felixthefoxMEXICO]

You just use a grinder

[@xavierfreire2915]

wonderful machine, friend, why at minute 3:30 do you use some threads, what is the objective of these threads?

[@cncrobotic5254]

hi great machine, i have a question, where do you get thr rails of this machine

[@kadirakyollu4024]

Good job, how did you solve the software side? Did i miss?

[@julvicentdavilafuentes7358]

Greetings friend. I have a question, do you also use a creamyera in the Y axis transmission?

[@JuanNaro-bo8om]

hola estimado saludos desde peru que medida de cremalleras utilizo para su proyectó

[@user-vv4hn1ox1l]

Hello. Everything is beautiful and interesting. Question ? Maybe it would be better to buy a ready-made factory machine and start earning money right away! What to do with a stupid job?

[@smdpicker]

It depends on how you want. Some people like homemade food and some likes to eat at restaurant.

[@user-xq4px3nm6g]

Здравствуйте! Не понял момент на 3:36. Плоскость не получилась, раз нити разошлись? Плоскость вдоль оси У вы выровняли по линейке на краску. А как же плоскостность вдоль оси Х? Или конструкция направляющих по оси У допускает самоустановку?

[@user-xq4px3nm6g]

А, вижу, что наоборот плоскость получилась

[@user-os1vo2mu1t]

Да тут много моментов на самом деле, видео как будто делают одну плоскость и получается перекос потом они вторую плоскость Российской поверочной тоже ровняют а между собой плоскости наверное сами собой должны выровняться?!!))

[@angeloduca9071]

what do you call that long bar that used for leveling?

[@harizummer3233]

What was the strength quality of aluminium when compared to metal is this last long.

[@budgetgamer1633]

What is the thickness of Ms sheet for y gantry?

[@xxxxx5801]

Здравствуйте! Обратил внимание, что по осям X и Y у Вас к зубчатым рейкам шестерни прижимаются пружинами. Насколько такое уместно? Разве это не создаёт огрехов в точном позиционировании под нагрузкой?

[@SchuhputzerKarl]

Nice, you stole the Idea from New Yorkshire Workshop and made a great Job. I love such Videos of "Low Budget Selfmade High End Stuff" thats works really really nice!

[@aso_tex3199]

Боковые детали каретки так и остались на прихватка?

[@kapot77]

why no using guiide liner , level using leser beam

[@asifbaba3432]

please tell me belt timing pulley gear ratio for Y axis

[@asifbaba3432]

please tell me belt timing pulley gear ratio i think 1 ,2

[@Building_Bluebird]

What is the size of the cutting area on this machine? X and Y

[@gejultea7014]

What is the weight for the X axis bro

[@hands_not_from...]

Михаил?

[@FoxCrafts]

Yep)))

[@Krokodil2131]

Советская школа

[@LANCARJAYAAUDiOJOGJA]

Berapa ukuran mejanya?

[@FoxCrafts]

2000х2000mm

[@LANCARJAYAAUDiOJOGJA]

Oke.. Terimakasih

[@user-ep7od6kl8u]

РМЦ =)))))

[@Jigzbo]

I mean, it is a nice build. But sorry to say, It hurts me so much to see you weld without any protective gear for your hands and that you spray paint WITHOUT any mask. Please, never spray paint without wearing a mask... Breathing in that toxic stuff, not good. Got the money to buy the metal and all the components needed, guess you should spend a little of that money for your own health. Also to teach other people that are watching your video. Can get really sick from that shit.

[@user-zl5pi1lj6i]

Верно подмечено .Но могло и не хватить денег .Да и люди не задумываются о последствиях .Себе уже купил классный респиратор .Осталось купить разные фильтры .Довольно дорого но здоровье дороже .Всех благ!

[@ericprobinson]

@2:06 did you have Diarrhea?

[@CeNuVezi]

So funny u straight the rail place , to use a shitty sbr rail ....

[@msf4514]

Muito ruim.

[@Scud265]

Homemade DIY🤡