Foxwell NT604 Overview - 4 Module Scanner (Engine, Transmission, ABS and SRS)

[@SuperHtownswag]

Great review. Because if one were to read the amazon reviews, one would be led to believe that it only reads transmission codes (if they were to come up) and not that this device actually shows you LIVE TRANSMISSION...which is critical because you would be able to tell that a transmission is slipping ("input shaft speed data") which is absolutely critical if buying a used car

[@SimpleCarGuy]

Yes, exactly! They don't mention this stuff because they seem to cater to DIYs or someone that wouldn't know how to use it, but I was able to fix a few issues with live data. Very helpful.

[@akietomchannel3679]

Thanx Man... Bcoz Of Your Video.. I Bought The Same One Today..

[@W211]

Ok, I’m buying one right now!

[@NikitaGenrikhs]

Hello. It doesn't show transmission module in module selection. How to resolve this issue? I have dodge grand caravan 2011

[@HauntedVenturesFX]

Will this scanner work on a Dodge Stratus 2.4L ? I did not see Dodge listed when you were scrolling down the list of makes and models beginning at 14:23 . Thank you!

[@plentyponies5886]

many thanks for your video it helped me decide to buy the 604.

[@Carrs-Firm-Foundations]

Is there a tool like this that does the transmission quick learn process?

[@hayabusahaizuka8835]

I was gonna return my casue i don't know how to use it. But after i watched this ved i will keep it.

[@SimpleCarGuy]

Glad it helped! Thanks for watching.

[@NadaYo4]

should i get this for my 2007 honda civic?

[@78W72-m2h]

Will this scan tool read multiple modules to check for odometer milage clocking/roll-back when purchasing a used car ?

[@rudygomez6996]

What scan tool would you recommend the most for around same price as this scan tool?

[@codimorningstartv4364]

Can this do the correction of odometer??

[@devaughnandrews5954]

Does this do cranckshaft positiin sensor relearn

[@slagletoby]

If you have a BMW buy a refurbished laptop with large memory and large disc space, EBay $250. Then buy ISTA+ which is the proprietary BMW diagnostic software that the dealer uses, EBay $30. Plus a DCAN cable. From there you can truly work on your BMW like a professional.

[@SimpleCarGuy]

I have one of those and I've used it for programming new modules etc after an engine swap, but this is much more convenient and works on different makes of cars.

[@BMWI-gk9wh]

Nothing compares to ista! And anybody with it would throw out any scanner in a heart beat. Ista is the absolute best software for Bmw. No comparison.

[@stasiosnikolaou8146]

Does this allow you to put the car in a service position like for breaks, disengaging the parking break ???

[@kendewitt5811]

Thanks for the review, it gave me the confidence to buy one. Now I have a question. When you scan for DTCs, it comes up with two menu options once the scan is complete: "Current DTC" and "Other". What is "Other" supposed to be? Are they maturing? Historic? or a reference of all the possible ones? The manual shows one of the more upscale model screens and the menu choices on those are a little different. Thanks!

[@SimpleCarGuy]

Depending on the car it would be permanently or pending codes.

[@jeyen08]

Hi. Very informative. Can this scanner initiate transmission adaptive relearn or reset in hyundai santa fe cm? Thanks in advance.

[@Landlordsplace]

Can you tell me if it will change the ecu value in my truck computer tpms from 32 PSI to 51 PSI for my new tires. Tired of running my tires low all the time to keep the dash light from coming on.

[@drewdrilak5853]

Does this scanner read transmission temp?

[@EM-tc6tp]

Can this reset e-brake so the service can be performed on the rear breaks?

[@familyofgaming1792]

Can you use this to see if someone reset the codes before you buy a pre owned car

[@karrarlion615]

Does it move airbag lights??

[@williamgillan3696]

hello again if i cleared these two dtc codes d900 & e510 with the foxwell nt604 would they come back

[@michaeltafoya7708]

Can this test radiator fan and relays? I can't find where to test stuff like that

[@SimpleMistaken]

Do you know if you’re able to change the Celsius to Fahrenheit?

[@bobpalmer4740]

what do you think the nt6x4 is it now has 2 special function's it will not update as it is registered to my neighbor that moved and sold it so when they clear it to me it may get the middle number and more special function's

[@jamaljones7280]

Why does mine only have 3 scans and yours have 6 when doing the diagnostic test? Even after the update

[@azulafc3205]

Will this read a wastegate actuator voltage on honda?

[@karalewis2908]

If you change your odometor cluster dose if correct mileage?

[@joyroc885]

I take it this one wont let you do a crankshaft sensor relearn?

[@whymedude88]

Hey there, thanks for the video. Just wondering, will this do the parking brake actuator for BMW?

[@SimpleCarGuy]

I don’t believe so, it does not have any service functions that I could see. Thanks for watching!

[@whymedude88]

@@SimpleCarGuy ok thanks

[@victorcastellanos1081]

Hi can this scanner erase the airbag light after correcting the problem I purchased it thinking it would but it doesn't seem to do it

[@flow1180]

What about Throttle body positioner

[@chuysilverdeath]

Can you show a video of clearing the airbag light, you skipped it

[@baribaribuibui123200]

Can you see the clutch residual quantity?

[@Bryan-qc6to]

I got a 08 gmc sierra can it relearn my throttle body sensor

[@moustafaibrahim2886]

Great video! I was wondering, does this scanner give vehicle specific codes based on the make?

[@SimpleCarGuy]

Yes, it dies

[@williamgillan3696]

hi there can i clear these codes with this obd tool--i have this problem with my 2010 ford focus diesel car, i sent the instrument cluster away but when it came back car wouldent start the people who resoldered some of the joints on cluster emailed me with this The Ford Focus has DTC codes that are stored separately from the ECU and these codes will show up on the driver's information screen located in the gauge cluster. Ford has a list of DTC codes that can come up and what they mean. If You have a code E510 D900 then that means that there is a communications fault for the ignition, as well as a communication fault with the transmission. Usually this means that Your car will not start. This most commonly happens when the wiring to the ECU gets damaged and it does not get a signal from the transmission or the ignition system.

[@VivoPaContarlo]

Can this diagnose a bad fuel pump?

[@noeltrujillo6154]

Question, does this scanner bleed ABS brakes?

[@JohnSVT]

Will this scanner show the permanent dtc codes and does it shows Drive cycles ?

[@JK-qr9rt]

I have ABS and ESP warning lights on my dash. Can this tool tell me exactly which part is faulty? Can it pinpoint which wheel sensor is faulty or if the ABS pump is faulty?

[@antuanla1519]

I’ve got a similar problem. I have a 2012 GMC Yukon Denali and have a “Service Stabilitrak” light on. Just ordered this scanner from Amazon and am waiting to receive it. It did mention in the comments that it can read all ABS and Stabilitrak codes. So looking forward to scan my car. I’ll let you know what it says if you’re still curious.

[@JK-qr9rt]

@@antuanla1519 I got a ThinkDiag instead, so much cheaper. It identified my pump as the cause.

[@MegaHorse7]

Let's know ​@@antuanla1519

[@DELTRANIO99]

@@antuanla1519 How did it work out for you ?

[@davidlechap8083]

Does it allow u to turn transmission solenoid on and off?

[@imurleader22]

Does this scanner work for 2004 Chevrolet suburban?

[@coachmatthew9706]

Does it work to update vin #on ecu????

[@Howe_Low]

Will the scanner still turn on if the car is dead?

[@tylerglover442]

Probably not. That’s when you know you have a dead battery. You don’t need a scanner for that.

[@arose636]

Do you need the key ignition on to do a proper scan ?

[@SimpleCarGuy]

Yes, the car should be in ACC (accessory) mode. It could be different for different cars. On most, just turn the key right before starting the car, on some (like newer BMWs), you have to triple click the start button and the car goes in to 'diagnostics mode'

[@Timur4593]

Can you log the live data to later access it on a computer?

[@allanmahmod4264]

Hello...very nice video...stupid question possibly, but can you tell me if this tool has the ability to tell me why my a/c isn't blowing cold air please? I have tried a can of A/C Pro Refrigerant as recommended to no avail. I have been advised with many different reasons but would like to get a more accurate explanation before taking it into garage for diagnostics.

[@SimpleCarGuy]

Hi! Unless there is a failed electronic component, this tool won't tell you why it's not blowing cold air. Most likely you have a major leak somewhere or your AC compressor isn't working. Best way to figure this out is to hook up the gauges and see if there is pressure in the system. Good luck and thanks for watching!

[@isabelaruedacuaspa127]

Hola, alguien podría decirme si este escáner es de buena calidad? Es para comprarlo de regalo a un mecánico pero no sé absolutamente nada al respecto. Por favor y gracias

[@karalewis2908]

Dose this scanner correct mileage on all vehicles?

[@SM-zf6ye]

I cannot find a way to clear the vehicle history. Any suggestions?

[@t_money_third9654]

How do you know what vehicles it's compatible with before buying?

[@SimpleCarGuy]

They have a list on their website and I would also recommend asking on the Amazon page as they respond there pretty quick.

[@AppreciatingLife]

is this better than blue driver?

[@mhoffer11]

So this scanner will show what cylinder is miss firing? I have a miss but the engine light is not on.

[@BMWI-gk9wh]

Obviously

[@1up_88]

Does it help with relearning the idle ?

[@IsaidIt747]

Have you found out?

[@1up_88]

@@IsaidIt747 nope

[@donkeyrhomper]

hey, mind saying if the 604 is capable of activating the abs pump and cylenoids?

[@andrewg091]

This is the most basic model so it does not support ABS bleeding. The NT644 can perform ABS bleeding.

[@bobpalmer4740]

to bad they do not save the data in one place. i ran mine today and found codes and it only save on set of data this is a poor way to have to use one of these having to save and enter names for every section when it allow the save data mode

[@scottshelton7401]

Will this do a clutch point and drum relearn on ford dps6 dual clutch transmission?

[@Jonathan-xb8ng]

What did u use

[@bkgocrazzy]

I took my car to oreillys and it had said transmission request on the obd. Do anyone knows what that mean . ? Is it low on transmission fluid or something because it doesn’t give me any transmissio

[@SimpleCarGuy]

You'd need the actual code to get more information. Otherwise everyone will just be guessing.

[@donlovelace2127]

Will this work with active handling codes and steering angle sensor readings?

[@SimpleCarGuy]

This may not be the scanner for you. If you need to clear active handling codes and SAS, you will need a scanner that supports all modules (this one supports engine, transmissions, ABS and SRS only).

[@Vexcyylol]

How do I compress my brake pads with this scanner

[@bloominflowers6766]

I really am not sure....still trying to get mine to order burgers at the drive thru worked out.

[@OmarJace]

Does it test the battery/alternator? Thanks

[@SimpleCarGuy]

No, it cannot so current testing. I have done reviews on some units that have battery clips and can do actual CCA test etc. I’d recommend that instead

[@kingpush4695]

I wanted to know if dis OBD2 works with a Genesis ??

[@SimpleCarGuy]

Yes, it does

[@jeremyellmer3925]

Can I get an update on if this is still working? I want to purchase one but I'm worried it wont last long.

[@SimpleCarGuy]

Yes, works great!

[@lem7827]

oil change reset function? do we have that?

[@ledgercook5761]

Yes

[@reaper7137]

does this scanner allow you to rewrite vin number on new used ecu

[@reaper7137]

youre reply will be highly appericated

[@SimpleCarGuy]

It does not have that functionality

[@reaper7137]

@@SimpleCarGuy thank very much

[@jomarvega794]

Hey what do i have to download to update this? its not reading my 07 bmw

I also downloaded this version and everything works perfectly. I have downloaded updates!

[@jusstinbrock8332]

Can it do a crank postion relearn?

[@SimpleCarGuy]

I don't believe it can.

[@yasmeencollins5606]

Will this scanner work for 1998 GMC Yukon??

[@SimpleCarGuy]

I’ve never worked with GMC or 90s cars, so I have no personal experience here. According to the manufacturer, it should support anything starting at 1996, but it will be just basic OBD2 functionality.

[@sandeetee6511]

So all models of car work from 96

[@404notfound.....]

How would you compare this to the NT624?

[@almightyjair5331]

Does this have a TPMS section?

[@SimpleCarGuy]

It does not

[@nyacoustics8373]

does this show LIVE transmission codes?

[@SimpleCarGuy]

Yes, it will show live data on the transmission module.

[@FaisalKhatib-u9i]

I dont have a sd card slot ehy in it

[@MrAlternation]

works for 2016 ford mustang gt?

[@SimpleCarGuy]

Yes, it works on all cars pretty much.

[@jacquelinegomez4776]

It didn’t clear my abs codes even after fixed. Any troubleshooting I can do? It said cleared on the foxwell unit but not the vehicle.

[@SimpleCarGuy]

Did you go to the ABS module and cleared the module specific codes? After clearing, when you check for codes again in the same place are they back?

[@bernardopadilla1842]

Does it help re-learn crankshaft sensor position? Thanks.

[@_mcknight]

I just bought one recently. Can you operate this scanner with car fully turned on? Or only when you put the key in and turn it once to get the battery on?

[@SimpleCarGuy]

Yes, you can operate in accessory mode or when the car is running.

[@A_DIY_VAN_GUY]

It's 139.99 at Walmart before tax

[@Jedi_Luke]

This tool is decent, but save up $40 more and get the NT624

[@yocliving925]

Hey do you know how to download the software for this model NT604. I went on the website but this model is not on there.

[@SimpleCarGuy]

I don't remember 100%, but I think I just downloaded FoxAssistSetup from www.foxwelltech.us/support-tools.html for NT624 and it worked to update it.

@@SimpleCarGuy I also downloaded this version and everything works perfectly. I have downloaded updates!

[@noahchastain5758]

can you see the engine retard and advance on this scanner ??

[@klash559]

Bro never turns on the car

[@eddiegoodtips8990]

On none of your videos you show what Languages are available??? On settings on trying to buy one some one that do t speak English and unfortunately you don’t show that

[@SpecOpsDad]

Can this test the battery voltage/charge? Or would I need a dedicated battery tester?

[@SimpleCarGuy]

You'd need a battery tester.

[@hiddenguy2]

can this correct an odometer?

[@SimpleCarGuy]

It cannot.