A LARGE 3D Printer...That Just Works? | Creality Ender-3 V3 PLUS

Рет қаралды 58,960

Күн бұрын

Пікірлер: 269

@Levkin 6 ай бұрын

Black might not focus well, but it’s really good for seeing layer lines, and see how well these printers actually print. Please don’t stop using it :)

@dylanshields7106 6 ай бұрын

I have the ender 3 v2 plus. Is my first and only printer. It’s been a fantastic learning experience on how to actually get it working good. Very frustrating at times and very rewarding when it goes well. I think I’ve got mine in a good place right now. Prints well with only brim and good z seam quality. Stringing is something I need to figure out how to fix I’ve got a dryer and an enclosure to keep temp consistent but still stringing a lot.

@7996hobguy 5 ай бұрын

I gave up on the tinkering with the Ender 3, bought a Bambu P1S, and I am extremely happy. I am picking up another this weekend, as my wife has taken mine to use for her crafting. It is THAT easy to use.

@daremo50na76 6 ай бұрын

As far as the Neptune series of printers go I present you with my own story: I bought the 4 max in April of this year and started pumping out mark 85 pieces. I was also printing out smaller print in place pieces as gifts. The printer lasted about 3 months before going bonkers. I agree with your thoughts on klipper. I hate it personally. I got in touch with elegoo support and after exchanging several emails the sent me a free brand new motherboard. I love elegoo. I still dream about a K1max though.

@Andre_M_3D 6 ай бұрын

Great video Franky. I have 4 printers and my favorite by far is my k1. I rooted mine and with the ability to use mainsail and all the available options, it is an amazing printer. I find it to be the most reliable printer as well. I have way over 1000 hours and Creality has been great. I broke my front door by mistake and they sent me a replacement right away. So I can't complain.

@Printsbynick 2 ай бұрын

I’m looking into buying one of these in the next couple months. I’ve been really impressed with their K1 SE and V3 XZ.

@dvdganon0812 Ай бұрын

They should make a feature in the slicer that slowing the print when you get above certain height. And acording to the geometry

@thereviloza Ай бұрын

Oh Wow Frank, Thank you. I have a K1Max as my first printer and as a NOOB to this i have been overwelmed by the requests i have recieved on printing ...have recieved an order of $ 1500 for a print for a company based on my deliverable from my K1 Max and am now looking at a Ender-3 V3 PLUS in order to deliver on two printers. Super excited what is your opinion. on the Ender-3 V3 PLUS as my second printer, Creating a business as we speak!!!

@GDM1787 4 ай бұрын

These printers are … EPIC!!!

@gangleweed 2 ай бұрын

Oh my gawd......just when I thought it was the last word for economical printers with clout like the Ender 3 V3 SE along comes this one with more bells and whistles blowing and clanging for all their worth.........I just received my Ender 3 V3 SE today and it's still in the box waiting to get out........oh and BTW, I like the presentation very muchly .... it has real excitement and those prints are awesome.......the jointed dragon is out of this World......etc. etc. Also, this will be my very first attempt at 3D printing....I already have the first Ender 3 printer with a few upgrades installed but haven't used it and will sell in on as a new item on Ebay or wherever.

@herseem 2 ай бұрын

Very helpful review, thanks.

@danielmills3945 6 ай бұрын

dude, the cardboard cutout got me rolling lol!

@andyman8352 6 ай бұрын

Excellent, thanks for that perfectly timed review. It is like you knew I was on the Creality site looking at new printer options last night! I will strongly consider that Ender 3 V3 for my next unit... I do have one question; Do you have a video, or general recommendations on what to do with older printers that are not being used any more?

@jasonax1523 6 ай бұрын

I have the 3 V3 and it is a workhorse. The only issue I have had with it is when you pause the print to change the filament, or pause the print job for an extended period of time, the filament tends to snap off inside the extruder just below the gears.

@3DandTeePrinting 6 ай бұрын

I love mine but man does it squeal at low speeds. Found I had to slow down the top layers because it was set too fast when Orcaslicer first released it. The Creality 5.1 has a really good one which I copied over to Orca and have been using that with slight tweaks to my liking. The Neptune 4 Plus was plagued with firmware drama on launch. Took me 2 months to finally tune it in and install replacement parts for parts that arrived damaged on the printer.

@chrisstepper2409 5 ай бұрын

Love the videos I've had the v3 plus for a few months and have had really good results especially since they dropped the new slicer software, also heard that the new CFS system will be compatible with it and the k1s

@TMad_3D 6 ай бұрын

Great video! Looking forward to the K2! Have you ever used the Qidi Max 3?

@FranklyBuilt 6 ай бұрын

Yeah I hated it lol

@DanielMaritz-fb5ub 6 ай бұрын

About the ender 4, it goes from the ender, ender 2, ender 3, ender 4, ender 5, ender 6 and ender 7 (the printers from ender 4 or 5 are in a box shape)

@tattoobill3850 6 ай бұрын

Bro I just got the k1c thank you so much for getting me into 3d printing it's my favorite thing I ever done

@TravisRamage Ай бұрын

I got this printer a few weeks ago. Works great for small prints. I'm having issues with bed adhesion in the front left corner. Can't seem to fix the leveling manually.

@mikemike6096 5 ай бұрын

I like the large build plate. That dragon would never be printed for my kids. I couldn't imagine stepping on that thing early in the morning after waking up.

@WeebCaptain69 6 ай бұрын

Show us a how to print video on the shredder helmet that was in some of your shorts

@CharisPapas 16 күн бұрын

And also is the most compact 300cm printer in the market. The competitors are by far larger.

@BigFunAgency 6 ай бұрын

Hey Frank, are you going to San Diego Comic-Con? Doing any panels? It would be great to run into you and say ‘hi’! 😊

@mrgtoyz 6 ай бұрын

Love ya Frank but I'm never buying Creality again. When they work they're fine and when they don't it's aggravating. I've been working on my K1 all week because it got a bad clog. Had to replace the motor, heat block and one of the tension cable plates because that broke somehow. Then I was getting a weird line in the center of the prints because the belt tension is off. Tried updating the firmware and it just bricked the whole printer. Meanwhile I've had like 10 Elegoo 3 Pros and a P1P for almost a year and rarely had any issues with them. I just don't trust Creality anymore.

@NWGR 6 ай бұрын

Same place I'm at. My four bambu printers (2 A1s, 2 A1 minis) have been reliable workhorses since the day I got them.

@stokedonphotos1 4 ай бұрын

I'm with you as well. My KE is all over the place, some days it works, others it fights me. I've replaced the hot end twice and recently had my x limit switch fail and I cannot find the parts nor a video on how anywhere. I put an order in for a P1S this morning.

@alagon2047 6 ай бұрын

AhhHHH! ahaha that yell loved it

@DeanosRides 5 ай бұрын

Always been a fan of your videos and your videos have helped me out many times with various prints, but........................ I have been using my little CR6SE for the past 3 or so years and just love this printer. Yes, I have modded and frankensteined it so much, but it just does what I need. But now I need something that won't break the bank, but has a large print bed. I have to say, I've been eyeing this printer for a while, but after watching this video, I'm a bit worried because you kinda do say go for it, but then you don't... And the K1 Max is just way out of my price range for now. So do I or don't I? Oh, I also want to be able to slap my Pi with Octoprint on it! This is a MUST HAVE! I don't want Creality spying on my prints and networks... 🤣🤣🤣

@joshuamccracken8994 6 ай бұрын

good honest video. Hope i can meet you at SDCC!

@allisonschulz6051 6 ай бұрын

Great video keep up the good work

@ThisisDD 6 ай бұрын

I wish this had been available when I was looking for this size. I ended up with a K1 Max. VFA for days

@Oramister 6 ай бұрын

Im such a big fan of you ive been saving for a neptune 3 max!

@stokedonphotos1 4 ай бұрын

I had purchased the v3 KE earlier this year and have close to 700hrs on it. I've replaced the hot end twice and just recently my x-axis limit switch failed out of nowhere. Creality parts are almost impossible to find unless it's hot end/nozzle parts. I ordered a P1S this morning.

@wo88les 6 ай бұрын

7:30 completely agree. I have been using Orca* Slicer as I had terrible results from creality print. The new creality print is fantastic, Even support for layer pauses and other options that should have been there a long time ago :D However. My next upgrade could possibly move away from creality

@AxtonLabs 6 ай бұрын

Great video ✌🏼 Big up Frank, he is the reason I’ve got a 3D printer & probably thousands of other people 🔥 Respect ✊🏼

@Jejjing 6 ай бұрын

Great review! This makes me want to get one!

@A-scketchy-otter-lol 6 ай бұрын

Most people don’t trust creality, if you do more research you’ll get why.

@A-scketchy-otter-lol 5 ай бұрын

@Xunjie3D Never heard of you. You have littne to no good reputation, if you were just advertising maybe id trust you, but since youve lied i think ppl might wanna avoid your stuff

@elsap75 5 ай бұрын

@@A-scketchy-otter-lol I also never heard of you - even if I was in the last 38 years many times in China. Your comment is rater weird and unpolite. Why I do not buy a Creality printer anymore is the reason, that Creality's firmware is always prototype level only and not working properly and customers will never get a proper working firmware update. Chinese, especially Creality should not only copy hardware and software from Western companies but should modify and optimise the open source firmware to work perfect for their hardare. But Creality never does.

@A-scketchy-otter-lol 5 ай бұрын

@@elsap75 what?

@IsaacEdwards-g1v 6 ай бұрын

"You have to consider eeeeeaah". Frankly built July 20 2024

@Droneflyer3000 6 ай бұрын

Yo Frank. Something you could start doing is linking the files of things you show in the video. Cause I've been trying to find that same dragon files FOREVER and haven't been able to find it. Thanks

@ironplatypus7393 6 ай бұрын

Google Cinderwing. Its her Crystal Dragon. have fun

@maxthorax13II 6 ай бұрын

Should be the Crystal Dragon from Cinderwings. It’s a paid file

@Droneflyer3000 6 ай бұрын

@@maxthorax13II Awesome. Thanks

@Enjeenier 6 ай бұрын

Make a vid about how to get companies to send you stuff, great vids btw

@FranklyBuilt 6 ай бұрын

Uhhh…make videos and gain a following lol

@802Garage 6 ай бұрын

Solid overall. Really hard to tell exact print quality though without some actual stationary in focus close up shots. The key issue with most Creality printers right now is the extruder design which leads to a lot of artifacts.

@ATOMICS-z1h Ай бұрын

The filament company's could put a cool collectable toy or something with the plastic 🤔

@Rion-z6t 4 ай бұрын

Great reviews. Just slow movements when showing closeups and use manual focus with small aperture (high iso if needed) . Most cameras can't autofocus well enough. movies use manual focus techniques ! google depth of field and manual focus. cheers

@stanzatara 6 ай бұрын

i had a couple ender v3 ke's and so far they are workhorses!!

@michaelhourigan8854 4 ай бұрын

Just ordered one myself, was a $200 (AUD) price drop so def snagged it for the larger volume.

@andrewbabcock5738 6 ай бұрын

I picked up an ender 3v3SE, and it just woks, zero issues lol, I find files, slice and print and have zero issues,

@yatsen2000 3 ай бұрын

Just what is not included to start printing right away. Is there anything Ill need to get. They offer two different add on kits are they needed? and if so which 1 Thanks for your time love your content

@ultimategaming8881 2 ай бұрын

I just got the ender3 v3 plus and the usb drive wasn’t working properly because before it printed it had an error. Also is the ender3 v3 plus wireless?

@TravisRamage Ай бұрын

I bought this printer recently after seeing your videos about it. Having some issues replacing filament mid-print to avoid runout during the night. It didn't go well, resulting in a fail mid print of a Mando Helmet. Any suggestions?

@danielvanhove238 2 ай бұрын

Hi, great video but can you tell me what the total surface area of the printer is? The minimum dimensions you need to place the printer, only the printer. Thank you.

@FranklyBuilt 2 ай бұрын

It’s on the website

@jrmh096 6 ай бұрын

I really thought about getting this one. I’m debating this one or wait for the K2 plus. I’m just worried this Ender plus will have the layer shift wobbling cause by the bed slinger when printing taller prints.

@diangleolodge1997 5 ай бұрын

Do you think the k1 max is still worth it compared to the new cheaper option ender3plus and its close to same performance. Thank you.

@shashanktg08 6 ай бұрын

What is the speed you normally use for this kind of helmets for good detail

@JustinNowell-jb4yq 6 ай бұрын

Do you think the Neptune 4 Max would be a good purchase? I want it cause it’s large and quick

@Optikification 6 ай бұрын

If you enjoy a lot of messing with clipper to get it to do the basics then yep. If it was as usable as the N3 max i have i would get one but all i see is people messing in clipper for weeks.

@brettbush8621 5 ай бұрын

I’m wanting to upgrade, I was looking at a ender 5 plus. Would you recommend the Ender 3- V3 plus over the Ender 5 plus

@calebbair8455 5 ай бұрын

Would you do a Warhammer for K space marine power your choice of Legion or faction and decorative designs? You don’t have to if you don’t want to again your choice.

@nicholasokeeffe7850 4 ай бұрын

when are u starting the new mk 85

@zaucethesaucebauce527 21 күн бұрын

Mine has a problem caused by the 2 springs at the bottom of the guide rails on the z axis should i remove them? They're causing all the layers until the moving assembly leaves their area of influence to not stick to each other and screw up in all manner of ways.

@czhusky 6 ай бұрын

where can I find that sword again?

@hereunderduress 6 ай бұрын

I have a neptune 4. It's a 3d printer but it leaves a lot to be desired. The printer head clog problem that devolves quickly into a destroyed printer head kinda sucks the fun right out of it. I feel like I have to babysit the neptune 4. On a 15 hour print that fails 13 hours in its pretty disheartening and needless to say I've taken a break from 3d printing

@mattiasisaksson905 Ай бұрын

Hey is the file for that crystal dragon free? The big orange

@andyspoo2 6 ай бұрын

Creality has a history of making half arsed profiles, relying on users to spend multiple hours sorting it all out. I cannot be bothered with that anymore.

@pophunter1645 6 ай бұрын

When did they update there slicer?

@TheRubikGames 6 ай бұрын

This printer or Bambu a1 with the AMS lite🤔

@bjbbiker 2 ай бұрын

Do you know how to send the print directly to the printer? I have creality print hooked up and can monitor the print there, but is there a way to wirelessly send the exported g code from Orcaslicer to the printer via wifi? Right now i am just shuttling the gcode via a thumb drive. thanks

@seekertosecrets 6 ай бұрын

9:16 That was unexpected!

@alij0n3s 6 ай бұрын

Watching this to justify my purchase

@anthonylong5870 6 ай бұрын

Fran what kind of liner would you recommend for the inside of standard helmets or masks/ something clothy?

@zacwarford7910 6 ай бұрын

Looking at do a Mk 39 suit. How difficult will it be to cut up files to fit on a P1S? Like you did, im trying to avoid cutting through the honey combs

@FranklyBuilt 6 ай бұрын

You’ll need to cut the legs and chest and backpack a lot

@leventenatkay8500 6 ай бұрын

Hi! Would you recommend this printer over the anycubic kobra 2 plus? I can't decide between the ender 3 v3 plus, the anycubic and the elegoo neptune 4 plus.

@aphaileeja 6 ай бұрын

Just picked up the Core xz! Only been about a week and already 2 extruder jams lol, I'm new to this and yanked on the filament the first time, second time was kinda weird, dug into the bed and then jammed, about to change the z offset up a couple .1s, anybody got more advice?

@gv100_blitz 6 ай бұрын

Where did he get those numbers for the 3 plus??? Pretty sure my 3 plus is 320x320 lol

@FranklyBuilt 6 ай бұрын

The 10-20mm size difference doesn’t matter. It’s the same size machine

@churchiemroboe2322 6 ай бұрын

When you print with the printers you are testing, are you using the stock slicer or do you switch it up between orca slicer too? Wondering what is better to use for my Ender 3 V3, whether I should use creality slicer or orca slicer?

@enosunim 6 ай бұрын

Use whatever works best for you. I started with Cura, then moved to Prusa slicer, for features like bridges when printing over infill. And later I switch to SuperSlicer because it have control over width of different model parts. And now I tried swtich to Orca and it just does not work for me. I do not like the UI which makes me feel Cura flash backs. And it game poor quality for me. It have lots of cool stuff, but I do not see difference only trouble with them. And without them, I just better use Superslicer. For example Orca does not allow to multiply objects and then set them all at once. You need to set one object then clone. If you want again to change something you need remove clones, then repeat. So some features are absent to my surprise. So use whatever you like and what gives you the best experience.

@Ktm252Carta 6 ай бұрын

How did you get the updated slicer, Im apparently still running a bad one

@DougLifeAdventure 6 ай бұрын

What would recommend creality or bamboo lab the enclosed printers

@hikaru9624 Ай бұрын

From what I've seen on KZbin Bambu does seem to be a good printer for beginners and those less likely to tinker with their machines. However theres plenty of other great 3D printers out there that allow for more at a the same price point given or take. It depends on what you want from your printer in the future. I've noticed that Makerbot doesn't seem to be as common of a household name for 3d printers anymore. Anyway from what I can tell about Bambu is it's the Apple product of 3D printers. Pros being it's easy to use and very beginner friendly from what I've seen. The cons being exactly what you'd expect from an Apple-like product.

@gv100_blitz 6 ай бұрын

I’m coming k2+, just wait !

@richardmilner4392 5 ай бұрын

Would this printer work good for beginners?

@notchipotle 6 ай бұрын

newest creality print (the one that based on prusa slicer) always crash on me

@Paul__FC 2 ай бұрын

I just saw a sale price of $250. Must buy?

@id744 5 ай бұрын

I'm absolutely new to printing, let's get that out of the way. This model is currently $440 and the K1C is $599. Which would you recommend?

@s.leegooding1827 4 ай бұрын

I have both. K1C all day every day. Unless you need the build volume.

@id744 4 ай бұрын

@@s.leegooding1827 I ended up buying a Bambu P1P on sale for $499. Thanks for the help though.

@brandonsperlazza1655 6 ай бұрын

Quick question how did you get the flexi Rex to have the same print feel on both sides?

@abitnutz6747 6 ай бұрын

As painless and easy as that machine is to root. There is no reason to suffer through using Creality Print ever again. You can use Orca and print directly to the Plus just like any other Klipper machine.

@carlv8415 6 ай бұрын

Anyone know where I can get the STL for that dragon ?

@ImNotABot1243 6 ай бұрын

i have a few questions: what 3d printer were you using before? where can i buy the lights in your helmets? and do you paint your 3d printed stuff or is it individual filament?

@FranklyBuilt 6 ай бұрын

Check my other videos 😅

@ImNotABot1243 6 ай бұрын

@@FranklyBuilt Thanks

@zacattack5783 6 ай бұрын

Was it just me or did the focus kinda feel off for most the video. Its super well focused on you but seems like most the objects you were holding were hard to see

@A-scketchy-otter-lol 6 ай бұрын

Just you

@DanielMaritz-fb5ub 6 ай бұрын

I agree

@OmegaGamingNetwork 6 ай бұрын

It's nice and I'm glad to see Ender starting to push new printers again...but I really don't see how it justifies it's price. It's $479 and can only do single material printing automatically and at best matches speed with the A1 from Bambu which at this exact moment is $489 Including the AMS. The only thing it brings to the table is less then 40mm additional capacity. Which while that isn't nothing, unless you are mass printing extremely large prints just isn't that big a difference. Now if it was pushing 400x400x400+, then sure they have an argument. But as it stands, beyond "I just want to buy an Ender" it is inferior to it's direct competition in price in every metric that matters. Sorry, disappointed that Creality couldn't do better than this. Sadly I feel like this printer really just takes advantage of people who are new to 3d printing and don't know there are better options.

@_B_K_ 6 ай бұрын

Next up is Ender-3 V3 Plus V3 XL V3 Plus-3 V3

@beatooze8025 2 ай бұрын

Ender 3 v3 modern warfare 6 plus. Ender 3 v urban combat ke 1 ++ .. it just works... Oh.... Ender 3v Skyrim k2 😆

@kaelan_123 6 ай бұрын

It goes up to ender 7, i think, i haven't seen one, but i have seen an Ender 6, but the Ender 3 is the most popular. I still can't find what an Ender 1 is, though

@luciomachado9582 6 ай бұрын

AFAIK the first Ender was the Ender 2. My first chinese printer. After that I bought an Emder 3, a Tevo Tarantula Pro, two Kingroon KP3S, and a Elegoo Neptune 4 Pro. None of them (perhaps with the excepcion of the N4P) have the same print quality of the Ender 2.

@kaelan_123 6 ай бұрын

@luciomachado9582 Why is it called the ender 2 if it's the first one?

@luciomachado9582 6 ай бұрын

@@kaelan_123 It's mystery. Why there is a Tesla model 3 if there are no models 1 and 2?

@kaelan_123 6 ай бұрын

@luciomachado9582 it might be to do with the previous models only being prototypes, and then the tesla model 3 and the ender 2 are the first models that can be sold

@scrappy77777 6 ай бұрын

I bought a Tevo hydra 2 in 1 Printer & I hate it! Definitely gonna buy a creality

@theundertalenerd6981 6 ай бұрын

Hey, I have an issue atm. I want to print a sword and a shield, but there are no files to print it, and even if there is (for example there is one that comes with a full costume) THAT’S $4,500!!! Do you got any suggestions??

@FranklyBuilt 6 ай бұрын

Commission a 3D modeler to model it

@theundertalenerd6981 6 ай бұрын

@@FranklyBuilt I would but sadly I don’t got the money to ;-;

@giovannirosario4808 3 ай бұрын

So if you low the speed would it primt it right am concerned cuz i really want to buy one but am really comfuse I would like to make like status but if i want to make a iron man big that’s awesome so maybe you would help me pick

@JaizuGz 6 ай бұрын

Ofc the new slicer is good, they took Orca Slicer to make it XD

@ChasePK 6 ай бұрын

the iron man part is why ill never use a bed slinger again, the design needs to just be retired and core XY should be the standard, better speeds, better quality, and lends itself much easier to enclose.

@RoterFruchtZwerg 6 ай бұрын

The filament untangle thing is hilarious. Just add a bowden tube and fix the end somewhere stationary. Issue gone. I'll never understand why so many printers just drag the filament around. Completely pointless and an issue that can be fixed with almost zero cost by just adding a bowden tube.

@Czapsonn 6 ай бұрын

stringing depends on filament xd

@rockels_journals 6 ай бұрын

30x30x30 is actually not a verry good concept for a bedslinger... Probably also going to give some dimensional errors when prints are getting bigger/heavier.

@cmawhz 6 ай бұрын

i'll never give creality another cent

@mariospanayiotou6644 6 ай бұрын

@@cmawhz nobody should. Probably the worst company ive ever had to deal with.

@ryanwalker1341 5 ай бұрын

I've had 2 of their machines and can't complain too much. 3d printing is a finicky hobby as is. Maybe I've been lucky, most of the issues I've had were my fault.

@cmawhz 5 ай бұрын

@@ryanwalker1341 i have a LOT of complaints. sure it is a finicky hobby but mine didn't even work out of the box and had other hardware failures within the first roll of filament. my other brand printers just work.

@ryanwalker1341 5 ай бұрын

@cmawhz hey man, can't knock that lol sometimes you get a lemon, and it sucks. I have wanted to venture outside of creality whenever money and space in the house permits myself. Still deciding on what route I'll go though.

@mariospanayiotou6644 5 ай бұрын

@@ryanwalker1341 its not that i got a lemon printer, its that the company is a piece of hotdogwater dogshit that literally tried to scam me and get me to electrocute myself. Imagine you bought a phone but wouldn’t turn on and the manufacturer told you to run it over with a car to see if it would work. Then when you say no and ask to send it back (within the return window) they refuse so you go to paypal for a refund they sent fake pictures saying its from an email from you and “show” that you did run it over with your car.