FREE mini bike mod!! (for Monster Moto/Motovox 80cc) + future project ideas and upcoming videos.

A 100% FREE modification for a Monster Moto/MotoVox 80cc mini bike that will nearly DOUBLE its top speed!
SEE THE TOP SPEED RUN HERE!!! • FAST Mini Bike Top Spe...
Also a quick update on a future project idea and a bunch of ATV riding videos from fall 2015 and a few mini bike videos from earlier this winter.
NOTE: I am NOT responsible if for some reason you blow your engine. If you drive it responsibly (I.e. Not revving it to the moon until the connecting rod turns to dust) you should not have any problems.

[@ThatDrummerBen]

CLICK TO SEE THE TOP SPEED RUN HERE!!! m.kzbin.info/www/bejne/fJSUk5KqobKrb5Y

[@matthewmeisner6063]

ThatDrummerBen how do you make the paper clip thing

[@ThatDrummerBen]

Matthew Meisner just straighten out a paperclip, cut it down to length, bend the ends into hooks and attach it in the holes.

[@matthewmeisner6063]

ThatDrummerBen THANK YOU SO MUCH

[@ThatDrummerBen]

Matthew Meisner no problem!

[@skyromusic1420]

ThatDrummerBen plz reply I don't understand what u did

[@NoelIsHereA1]

Do a video on how to put it on I can't really see it

[@michaelgibbs336]

AngizeNither right

[@Ultimatrix117]

This is a great and simple idea I wish I had thought of this sooner! feeling dumb. Also yeah take the governor screw out and even not use an air filter and it will breathe very easily. Stock filter is too dense and restrictive. I also did some surgery on the stock muffler on mine and remove that mesh that's on the outermost whole now being taken exhaust can breathe very easily now

[@avenarztgreen]

thanks lol been trying to brige them i was gunna take a throttle cable off an old weed waker but this was easer and my bike revs all the way up and stays up now thanks u earned a new sub

[@ThatDrummerBen]

Aven Arzt-Green Awesome! Thanks for watching and subbing!

[@shawnlauderdale6502]

That's the governor! I did the similar to my bike and it moves a lot better!

[@zachyon4846]

Best demo ever thanks man keep it up

[@LifeWithJay22]

kzbin.info/www/bejne/fpauo3tnjs54b9U

[@crows1769]

I weigh 220 and only able to hit around 15-20 mph but after this I'm able to hit around 45 max thanks so much btw it's the same bike (80cc) and mentor for 150 weight on it so it turned it from a children's bike to a fun mini to rip through mud thank you so much❤️

[@nery878]

I saved 15% in 15 mins by switching to geico

[@deegan727]

I saved a 100% by switching to ............. hopefully your Geico has uninsured motorist coverage.

[@randyharms2307]

As far as i know paperclips arent free. 😝

[@thatskull]

Lol ASS this made me chuckle, thanks!

[@LvSway]

@@thatskull eh not as with another s "As" will do fine

[@Shark_Theory]

I have like 20 paper clips in my house and 12 bread ties

[@juju2greedy]

OMG thank you so much thatDrummerBen really happy about it

[@ThatDrummerBen]

iSymplify no problem!

[@josevelez7182]

Its True !!!! i did last week in my daugther mini bike !! and increased almost the double of the max speed !!! TY

[@ThatDrummerBen]

Awesome! Thanks for watching

[@DunnSann]

i own this same bike i did nothing more then remove the gov screw n got to a top speed of 43km/h after tightening up the cable for the throttle i was able to get slight increase in speed but a much faster starting acceleration

[@zinnstigertownmowers780]

Aye once your warranty is up get into the crank cover and disable the internal governor I had one of those bikes on my channel that I did that to that thing put out a lot of power with that puny little motor

[@SchmityFPV]

Great mod to gain some speed. I’m 200lbs and hit 36mph. Could this hurt the engine? Yes, you can now rev it higher, be smart and don’t go for rides full throttle the whole time.

[@goblinzyt1753]

Right now I am doing a of research over this bike. I kept going back in fourth from mini bike or dirt bike. I am buying one on Wednesday for 200 dollars which is a good deal and the bike runs great and has a hunch of brand new parts cant wait to get it. Any information I should know u guys could tell me?

[@michellemillet3035]

On mine without the mod I get about a good 32 on it. Im about in the 180 to 190 area and 5"11 tall

[@bubbaselectricsourrebuildo9883]

So do u tk off the spring?? Bsippp

[@justinmorgan3201]

I've pushed the throttle down with my hand and it will take off idk how fast but it's fast

[@FWDlol]

I followed your directions as best I could, I still don't know what happened. I got up to 68 mph and the next thing I knew, I was delivering a set of twins in a hospital room in Minnesota. I'm a 33 year old father of 3 who lives in the Mojave desert, so you can imagine my confusion.

[@ThatDrummerBen]

+FWDlol wow I'll have to ask around see if anyone else has had a similar experience. I did know one guy long ago who hit 88 miles per hour and he was never the same again. Its a crazy world we live in. 😂

[@JJsiahMoto]

Earned a sub

[@tylerstrausser7651]

Did you keep the spring on where you put the paper clip, or did you take it off?

[@ThatDrummerBen]

I left it on so I wouldn't lose it, but you can take it off it doesn't matter.

[@tylerstrausser7651]

Ok, thanks!

[@michaelcook5446]

Thanks man

[@xrednickx5608]

Zip ties work a little better

[@Aj-yh8nk]

Why would you not get a 212 cc???

[@rayray_741]

How long should the paper clip be on each side in centimeters/inches and what size paper clip are you using

[@ThatDrummerBen]

BO3 BEAST I'm not sure it's a little different on each bike. You can use any paper clip, wire, string, anything that can link it

[@Eddielevit]

Please make a video of you actually attaching the paper clip.

[@Ethanm64]

I have a Coleman ct200u and i did this and it goes 39mph but it might blow up my engine eventually but if it does ill get a predator 212

[@Ethanm64]

Messy Jesse no I sold that a while ago

[@djprimo380]

I don't understand what you did

[@DayyViddTheKid]

So you just took the spring off and put the paper clip on and then attached the spring to the middle of the paper clip so it's only the paper clip connected to the parts and the spring is only connected to the middle of the paper clip?

[@ThatDrummerBen]

You don't need to take the spring off and if you do you don't need to put it back on. I just put the paper clip over the spring.

[@Shytheweirdo]

ThatDrummerBen so i could just take tge spring out and leave it that way right?

[@ThatDrummerBen]

You could take the spring off if you put the paper clip/wire in yes

[@kylejohns8806]

What is the max you could go full throttle without messing something up?

[@nnaheim.]

About 10 million

[@TLMOA_s_playground]

A mate your a legend thanks

[@jjjancaric6017]

true but I just got a street mini bike to mob and chines engine are bad cuz my yz85 runs great

[@williamtylli8184]

I did it. It was a success😀😀😀

[@tigertommy4studios773]

Hey, I have this minibike myself but am wondering if its safe to do or not. I know the engine can blow but could you give me your input on the bike after all your modifications and whether its a safe thing to do when bypassing the governor

[@ThatDrummerBen]

TigerTommy4Studios if you want longevity, then no don't do this. I ran it for a few months and it was ok, but then I let it sit and the carb gummed up and it wouldn't idle. I could clean the carb or use one off a parts engine, but I didn't think it was worth it so I swapped it for a bigger engine. The old engine still runs, but bypassing the governor long-term like this runs the possibility of the plastic governor wheel coming apart inside the engine, it could throw the rod, or the flywheel could come apart. If you do it though, just be smart about it - none of those things will happen if you don't over-rev the engine. I never have any problems other than the carb.

[@ThatDrummerBen]

TigerTommy4Studios so in a nutshell, it's perfectly safe if you don't over-rev it, but it could shorten the engine's life-span. But hey if it blows up you can put a predator 212 or a gc160 or something in it.

[@tigertommy4studios773]

hey, thanks for replying and giving me your personal input on this bike, also, if it blows I'm not putting a 212 in it, ill squeeze a 670 in there! :P

[@ThatDrummerBen]

TigerTommy4Studios haha no problem! Be prepared to use a grinder and a welder to "massage" the frame a little, and have 911 on speed dial when you ride it LOL!

[@mitchellevinson1132]

Just take out the screw with the little spring in it

[@SolariFilms]

Do you have an insta that I can text you on to ask questions about this

[@fancy_banna]

i do recommend you take off your throttle limiter screw

[@looneytoon59]

does anyone know what type of oil this bike use? and what is the gray and black nob for..is the gray for oil or black one?

[@Mcpro20005]

There the same really look at each ones oil there the same

[@L3lnd]

10w-30 oil, 5w-30 as well.

[@taxyrionsmith405]

Thanks

[@Dopeboyz789]

I have one . can you make a video on how to change the brake lever

[@ThatDrummerBen]

Dopeboyz789 probably not, I have a hydraulic brake now

[@adamabusch]

So I'm guessing that with the spring on it's normal distance but with the paper clip on I'm guessing it shortens the distance between the two?

[@ThatDrummerBen]

+Aabuschy it doesn't shorten the distance it just keeps it from springing back. The paper clip holds it all the way open.

[@reempire888]

I removed the screw w spring that limit the throttle travel. That's the only thing I did. The bike vibrants pretty bad during high speed. Why? I checked the tension on the chain seems a bit tight...anything else I'm missing?

[@mangreat71]

Is it ok to attach a motor cycle trailer to this or make my own ? And they said the run time is 45-60 min run time what if i add more gas to the tank can i run it an extra 30 min ???

[@ThatDrummerBen]

mangreat71 I'm not sure I understand what you mean, you want to pull a trailer with it?

[@Ultimatrix117]

The little gas tank hold 0.2 gallons and is actually good for nearly 25 miles per tank

[@Ultimatrix117]

That sounds fun but I don't think it has enough strength to pull a trailer from dead stop.

[@adamslarren2100]

What you are doing is bypassing the governor, these engines are designed for about 3600 rpm. So you have to be carefull doing this as you can easily over rev and throw a rod. But it will certainly make it faster.

[@ThatDrummerBen]

Yes I know the dangers, but also the engine is such cheap garbage to begin with that I'm not concerned. My cousin has the same bike and he sheared the crankshaft in two somehow.

[@JJsiahMoto]

+ThatDrummerBen yep split in half

[@onlyicyy723]

NIce rancher what year is it I have a '05 and just installed a winch on it also taking the govner off does it make it faster?

[@ThatDrummerBen]

ItsKwiq Kwiq thanks! The Rancher is a 2001, the thing's a tank! I have some more videos of it coming soon. Yes this mod effectively bypasses the governor which makes it go faster. Thanks for watching!

[@onlyicyy723]

oh okay because im buying one just t mess around with and will eventally add a new motor and removing the govner is like removing the limiter on a car it revs high and will stay there

[@ThatDrummerBen]

ItsKwiq Kwiq yeah. I'm going to pick up a used predator 212cc engine and some performance parts tomorrow so we will have a swap coming soon!

[@joshl6643]

If I did this modification, would it wear the engine down faster? And what damage in general could it cause

[@ThatDrummerBen]

Yes it will wear down the engine faster, but it is a cheap Chinese engine and they are made with lower quality materials, so they will wear out anyway. It all depends on how high you rev the engine and how long you rev it. If it's not over-revved then it won't wear out any faster than they would normally. If it is over-revved you can throw the rod or bust the crankshaft. Just be cautious with the throttle and you'll be fine.

[@zinnstigertownmowers780]

For some reason. Motovox and Monster Moto are basically the same bike. Where did Motovox go??

[@Erik0824]

Zinn's Tiger Town Mowers they changed the name it used to be motovox now its Monster Moto

[@Chan-os5rt]

Question does your mini bike vibrate like crazy when accelerating? Just got one and it unbearable.

[@crazykatana1297]

My rb100 does. I'm assuming its normal.

[@L3lnd]

Yes its normal

[@malekbeast3752]

Does it work on a 105cc monster moto

[@L3lnd]

Yes on any motor w/ a govenor

[@Erik0824]

Mine only goes 33! 😭

[@Randomhobbys247]

Cool

[@joshl6643]

I was able to hit 29 mph stock

[@bubbaselectricsourrebuildo9883]

I wonder if u can do the same mod to the 212cc preditor??? I mean uts super fast as it is but u cant go wrong with super super faster...lol And uf i wipe out so what ill nk a youtube vid break the internet cause it will be soo funny. Thanks Bsipp (Breaker of Internet)

[@material7850]

Will it hurt it in any way or brake it

[@ThatDrummerBen]

+Mason Bothof it can, but not if your careful.

[@material7850]

MachineFreaks so do u know how it will brake if your not careful

[@ThatDrummerBen]

+Mason Bothof if you rev it too high you could throw a rod or something

[@LvSway]

Mine came modded. Except the screw

[@thayengxiong9258]

Does this work for the 212 series?

[@r.i.parthurmorgan5168]

Thayeng Xiong yes

[@Leantbackstreams]

i hit 30 by taking out the throttle screw

[@whitch1243]

will this work on the 105cc one

[@ThatDrummerBen]

Dennis Whitcher not sure, I haven't looked at them. If it has the same linkage then yes.

[@mitchellevinson1132]

It is right next to it

[@notapple9643]

I did this but my bike idles too low and shuts off whenever I idle it but it's fine lol

[@Mcpro20005]

Just pull your throttle cable a little bit till it idles good

[@commanderzavala4840]

I’m 6’2, 210 lb. I’m not fat I do weight lifting. I’m a senior in high school. Will I fit on that bike?

[@ThatDrummerBen]

+Commander Zavala if you put a 6.5 horse predator 212cc in it you'll be fine, otherwise it'll be too slow.

[@praisethelord8750]

Commander Zavala why did you have to tell your life story?😂

[@bpendergrass3587]

I'm 190lbs and it does okay as long as you're on flat terrain

[@shadyguero1974]

I’m not gonna risk it but thanks. If you’re reading this people, just remove the screw to the right of the governor. Then, you won’t blow your engine

[@jaydeefranklin5118]

I go 30 stock.

[@johnnyhaywood2008]

Take the throttle screw out too

[@moochy101]

i want to try this but i cant get my engine to start it runs for a sec then cuts off sometimes it will run but as soon as i change the leaver from start to run it cuts out do you know how i can solve this?

[@ThatDrummerBen]

Is your gas on?

[@moochy101]

yes

[@ThatDrummerBen]

Sorry I really can't say what it is without looking at it, plus I'm no mechanic.

[@officeralgh4337]

Clean the carburetor out

[@officeralgh4337]

With dish washing soap and water. Then squeeze it until it's completely dry put it back in and it should run.

[@ronaldemoore7915]

Does anyone know how long a tank of gas lasts ? Thanks

[@L3lnd]

about 1.5 hours, reasonable driving. (20-40 mph)

[@tacticalidiot175]

Doesn't do anything. The gas is factory set to full throttle. The ONLY way to make It faster is to remove the governor inside the crank case.

[@The_RC_Guru]

TacticalIdiot17 this disables the governor. Same result. But by leaving the governor in and revving it that high- the governor gear is plastic and can grenade inside.

[@duanebuchanan7689]

Who manufactures the motor? B&S?

[@ThatDrummerBen]

I am not sure... I'd have to check. With the quality I'd assume it's some dirt cheap Chinese no-brand engine.

[@ThatDrummerBen]

Yeah some quick research online didn't get me far. I can see a manufacturer sticker on the side of the engine in a picture but it's too blurry to make out. I already removed most the stickers off of this bike too.

[@duanebuchanan7689]

Thanks

[@7smoke6]

Lifan

[@yadiel1231]

Do you think i can do this on a honda gc160?

[@ThatDrummerBen]

Not sure, if I ever get a gc160 then I'll make videos on it.

[@technobuzzXD]

Yadiel Santana yes u can just make sure to have a return spring

[@yadiel1231]

do you know if the predator 6.5 is better than the honda 5.0 (actually a 4.6 they just rounded up)

[@ThatDrummerBen]

The predator is better because it's cheaper and more powerful, the Honda is better because, well it's a Honda. Either one is good in their own way. I picked the predator because one came up for sale for a good deal so I bought it.

[@landon9438]

Question how long would I have to rev it till it blows

[@ThatDrummerBen]

+Landon Siegfried I wouldn't hold it wide open for more than a few seconds

[@highatruthart]

50 seconds or 50 feet ''LOL''!!

[@JJsiahMoto]

Heck yeah boy! After your engine blows up get a predator! By the way, wether you do this mod or not, it will explode. Cheap engines! Get a predator!

[@bighoss3405]

JJsiahMoto predators are just Honda clones

[@SchmityFPV]

Predators are also cheap China engines. This is just a tiny 80cc vs a 212cc

[@josephwalters7839]

My mini bike 80cc it does about 32 and 34 if drag racing it lol

[@smakkabih2x672]

You made my engine blow

[@tacticalidiot175]

that's why you don't bypass the governor. it's there for a reason...

[@L3lnd]

well dont be a retard and hold it at max revs consatntly, just keep it to the occasional pull..

[@nateslife6831]

how bout the governor on the inside???

[@ThatDrummerBen]

It's still in the engine, this is bypassing it. It would be ideal to remove the governor completely from the engine but this is a quick and easy solution.

[@vitrasite4865]

will this cause any damage to my dirtbike

[@ThatDrummerBen]

It can damage the engine if you rev it too high and for too long. So yes it can be bad for it, so just know the limits of the engine and don't abuse it.

[@vitrasite4865]

So as long as i Don't go on full speed for a long time,it be fine,right

[@ThatDrummerBen]

Yep should be. If the engine does blow up it's probably a quality issue, and it give you a good excuse to put a bigger engine in :)

[@vitrasite4865]

Considering Im only 12,I don't exactly know how to put on a bigger engine,for example a predator 212c,but it i guess its worth the risk since it already has a few problems,but my mom would get mad Thanks Though.

[@ThatDrummerBen]

Haha no problem!

[@doloshi7731]

And that is how you blow the motor. The motor can't handle the speed,the throttle cable will snap.

[@xxzenonionnex7658]

dumb ass

[@xxzenonionnex7658]

the only thing the only one thing tjat the throttle cable does is pull the throttle valve thing open thats all it does

[@catfisher420]

All you are doing is keeping the governor open instead of letting it do its job. It is more dangerous this way because you have the cheap plastic governor gear spinning WAY faster that it was designed to. So when that plastic gear flies apart then your governor arm jams into your cam and crank and BOOM, parts all over the street! Just remove the governor.

[@ThatDrummerBen]

Yeah I know, this was something quick and easy. If I would've open the crank case and taken it out it would've voided the warranty. I'm way past that point now though.

[@thegreatoutdoors1075]

Yes exactly

[@ramiroyepez124]

It work

[@mclovin6096]

Confused about how to do it.

[@ThatDrummerBen]

Hmm.. What part are you confused about?

[@mclovin6096]

+ThatDrummerBen okay, I got it! My bike now goes around 30 mph!!

[@ThatDrummerBen]

Great! Good to see that you got it!

[@deananderson4612]

Will it damage the engine where it will explode

[@conner5611]

Dean Anderson the governor gear will just take the back of the motor of and remove the real governor

[@Marcelo-vy4cb]

Boy, that's not a mod, u can use it to control the speed depending on who is riding. It'S a control

[@ThatDrummerBen]

+Marcelo animations Op I modified the linkage, It's a mod. But you can use it as a control by taking it off when younger riders are on it.

[@Marcelo-vy4cb]

MachineFreaks I meant that it was something that u should know, not some secret , gigantic change, cause as myself I use it to adjust the speed , depending on where I ride it

[@spoonbruh741]

I'm turning 15 and I want this. Is it good or no?

[@ThatDrummerBen]

+Spoonta n if you get one just put a bigger engine on it. This one is just too weak.

[@davidfeder2255]

Great mod... if you want to blow up your motor at top speed for 2 minutes

[@ThatDrummerBen]

+David Feder that's why you don't hold it wide open for 2 minutes. Mine never blew up cause I knew it's limits.

[@austinreney1750]

i weigh 92 and I go 40 miles an hour

[@ThatDrummerBen]

austin reney nice

[@fmchighlights8025]

austin reney i weight 103 pounds, so the lighter the faster? im lucky then.

[@johngalasso1592]

I love you now

[@nicodante6485]

Can u do it on the electric one?

[@axismc33]

Nioce Thx for 0 likes!!!!!

[@andresbatista8661]

It’s dose work

[@jjjancaric6017]

don't do this it made mine go 45 but it blew up

[@ThatDrummerBen]

Jj Jancaric probably revved it too high. Mine never blew up because I didn't always keep the throttle pegged.

[@Koolboy7591]

Jj Jancaric you dumb little kid you are not supposed to keep the throttle all the way open for the whole time you ride it

[@5foot7kawi9]

with me i go 45

[@ThatDrummerBen]

Nice!

[@midamultitool6376]

Do you weigh 2 pounds

[@Erik0824]

That’s not posssible😂😂 no matter what you do the engine can only go so fast before the tires are going so fast the engine doesn’t do anything the top speed is 35

[@trickstermadness6763]

do not do this, please remove the governor gear.

[@Erik0824]

Trickster Madness why

[@tacticalidiot175]

@@Erik0824 it'll grenade inside and hurt the rider

[@jamesstrauss7339]

Have wone

[@mitchellevinson1132]

No don't do that

[@blazingsiah9062]

Vroom

[@ThatDrummerBen]

Vroom indeed

[@savoyyoung8192]

If u use a string it goes faster

[@Erik0824]

Savoy Young ?

[@eggcustardtart334]

26 mph is not slow...

[@ThatDrummerBen]

+ZixBlix it sure felt slow on those lol. It feels really slow compared to 40 haha

[@xxgamers_hubxx3134]

I hit 42 mph unmoded

[@ohhfree5952]

Richard Johnson how?

[@xxzenonionnex7658]

+OhhFree down a hill

[@djprimo380]

I don't understand what you did

[@ThatDrummerBen]

What part do you not understand?