FrSky X-Lite: Yes it can do D8 and D16!

[@Funcentric]

This can do D8 out of the box right? meaning it'll work right away w/o mods to the TinyHawks? I love the small form factor, but was intrigued by the Jumper transmitter you briefly discussed due to what sounds like capability to work with a more variety of quad protocols.

[@HalfChrome]

No. The original x lite can though.

[@CraZY.pRIME.]

Be nice if you put a link into the actual video

[@daFexKM]

What about the X-Lite S, does it support D8 and D16?

[@m600]

4:48 min just to say you use an external module... Like really? Misleading title isn't strong enough to call out that clickbait title. My grandma is a car if she had wheel then. smh.

[@phuongloano5176]

I have upgraded the firmware for x-lite pro 190626 and it does not receive the IR4X module, do you know why?

[@HalfChrome]

You need to use the nightly software 2.3 to use the module

[@tonykaofficial]

@@HalfChrome Hi, i used the nightly software 2.3 version: "companion-windows-2.3.0N50.exe" - but i can't download new firmware. Can you share your firmware for me?

[@danchoparker]

@@tonykaofficial i have the same problem. when i check xlite pro and no heli multi modul lua and luac then i cant download the firmware. companion says "no firmware release build are currently being served for this version, please switch to release channel"

[@danchoparker]

Ok. If we check in settings applivatiin options nightly builds. Everything works fine :)

[@tonykaofficial]

@@danchoparker how, can you sent 1 picture?

[@almondjoy590]

I am having a problem. I do not see d8 on my blue x lite pro. I do have a range irx4. Do u have to download a d8 on the card or firmware?? I'm not doing it right. I do see d16 access. I just want to put all my drone model on my new x lite pro because my old tarannis qx7 it just literally won't turn on any more..... I'm hopeless.

[@tomelcock7659]

Will this work with thfs2 and th2

[@HalfChrome]

It should but I’d go with the Jumper T-Lite. It is cheaper and a better option. Plus it will work for sure.

[@tomelcock7659]

@@HalfChrome thanks man and I love watching your channel, keep it up

[@HalfChrome]

Appreciate it. Check out our livestreams if you haven’t yet. Have a great day.

[@albidry]

Does it work frsky d8 d16....with r xsr receiver I didnt understand is it model of frsky...or any remote frsky working with any frsky receiver ???? For example I have radimaster tx12 it support protocol frsky d8 and d16...does it working with frsky r xsr ???

[@HalfChrome]

Yes

[@SeanOzz]

would either of those (the lite ) work with tiny hawk s, tinyhawk freestyle and the X-Knight 360 FPV Quadcopter invisible drone??

[@HalfChrome]

Yes. The original x-lite works with the Tinyhawk. With the FrSky Access protocol it gets a little more complicated since you have to match that now. So you have to make sure you match old and new protocol.

[@djwilson48625]

Can the original xlite do d8? I have the very first version, not pro, not "S".

[@HalfChrome]

Yes it can

[@TweetFPV]

Hey Thanks for the mention. Can't wait for more frsky updates, hopefully d8 some day and eventually the r9 lite pro module!

[@HalfChrome]

You do great videos. Keep up the good work.

[@cruddyjayvlogs7911]

I just got me x lite s and got the xjt module how do I do d8 mode I’m so lost

[@ramonskepweng333]

Hi is this one aint got no bugs at all when you bought it, or you still need to install some software or upgrade it .

[@robo909]

Plz check one thing. Install the multimodule and turn off the radio. Then charge the radio. And see the multi module is always turn on while charging. Plz check

[@Rodrigofrb]

I'm considering getting myself the xlite pro with the irx4 lite multiprotocol module to bind with my dsmx mobula7. Do you know if this setup would work? Bangood is quite poor at answering questions so I'm trying to get this info from actual users. Thanks! Great video!

[@HalfChrome]

In theory it will work but I can’t verify that for you.

[@Bearkat73]

I have used the Vantac MPM which does bind to DSMX, the channel mapping will need to be adjusted but that's easy to do in Betaflight.

[@jackfpv8904]

Video title said can do D8 and D16. Where is firmware update for D8? I actually need D8 for my X9 Lite.

[@HalfChrome]

Right now D8 is module based only as I said in the video. Supposedly they are working on it. But I have gotten D8 to work with a module.

[@jackfpv8904]

@@HalfChrome I got you. If I will like X9 lite, then I dont see a problem to stick with only D16. I have few whoops with D8 only. Will need to get XM receivers and I'm good. Well we'll see. Difficult to predict FrSky games.

[@havoc_64]

QX8??

[@ramonskepweng333]

Hi do you know if those transmitter can be used for helicopters

[@HalfChrome]

It depends on the helicopters receiver

[@ramonskepweng333]

Lets say i have frsky receiver, how do you setup the servo travel, pitch, trims and any other helicopter setup, is it by the transmitter or by betaflight

[@Bearkat73]

@@ramonskepweng333 you can use it with helis. Just need to flash the radio firmware and make sure that "noheli" is not checked.

[@danielebiolo]

For me it doesn't bind D16 with the latest ISRM v 2.1.0, must downgrade transmitter to v 1.1.3 available on frsky website in the Download section of x lite s. That worked for me with a novice 3

[@STIjojoSTI]

Can the Xlite pro be used for emax tinyhawk 2 and betafpv 85x hd? Or other tinywhoops?

[@HalfChrome]

Only if you get a module for D8 mode

[@STIjojoSTI]

Half Chrome oh ok. Im a newbie and this is very confusing.

[@HalfChrome]

It can be

[@RafikiTheBaboon]

Will this work for the Tinyhawk freestyle?

[@HalfChrome]

It will if you are in the right firmware version of the radio. FRSky has tried really hard to mess things up.

[@RafikiTheBaboon]

Half Chrome Wow thank you for the fast reply, wasn’t even expecting a answer back, subscribed

[@aerialcombat]

can it use the module from my jumper t16?

[@HalfChrome]

No. It’s a different size

[@Bearkat73]

It won't work native because different size however, there is an adapter now that allows regular modules to work with the X-Lite.

[@monsieur7246]

What's the range with the external module in d8 mode?

[@HalfChrome]

Haven’t tested it yet. Waiting for a firmware update so I’m not on a nightly build.

[@Fernybeme]

Why do you lie for frsky?

[@HalfChrome]

What am I lying about?

[@BMFPV]

Seriously mate those 18650's are fake and could well be dangerous. No 18650's are 5000mah trust me, dispose of them.

[@havoc_64]

Except mine is a paperweight! Damn FCC / EU bug

[@HalfChrome]

You can switch it from EU to FCC. Look up tweetFPV

[@havoc_64]

Umm, yea saw it. You have to email frisky support for a LUA script, did that 5 days ago...

[@chadbochenek89]

Go cubs co

[@haka8702]

even when putting youtube on 2.0 speed it's still unbearable much babbling without any info

[@HalfChrome]

I feel the same about your comment.

[@haka8702]

@@HalfChrome You can read my comment in 1 second, it doesn't take 10 minutes. Look I didn't want to insult you, just try get to the point after a short intro. No one wants to listen to a video for 10 minutes where 9.5 minutes are just smalltalk. Also the video is outdated, only old generation x-lites will do D8. The newer ones require external radio hardware

[@HalfChrome]

The video is old, of course it is outdated.

[@lubosschejbal9258]

@@haka8702 And with external module I can bind it with my Meteor 65 HD? (SPI receiver, Frsky FCC)