Fulcrum Racing 400 DB Rear Wheel Bearing Change

Fulcrum Racing 400 Disc Brake Rear Wheel Bearing Change
Bearings Size 30x18x7 , 61903-2RS If you find the videos helpful and would like to make a small donation to help support the channel you can do so here www.paypal.com/paypalme/freet...
Buy Me A Coffee
www.buymeacoffee.com/Freetocycle
Support the channel via the Patreon Page
/ freetocycle
Follow me on Instagram
freetocycle...
[e-mail]
Thanks for watching.

[@ldvcbi4317]

Another great video from FTC 🙏🏻❤️ THANKS FOR SHARE YOUR KNOWLEDGE and make easy the maintenance for cyclists. I think with this videos, if you have the tools, you know about mechanic it's very easy to do a lot of things on a the bike and do this in the correct way. I know the technical documents about Shimano and Fulcrum because my bikes are with Shimano components and Fulcrum wheel, I can say this guy is very serious because on details like torque and tips he is 100% correct with the official brands requirement and a video he's 10 time better than a document. A GREAT THANK YOU for you for sharing your passion, knowledges in all your PERFECT videos. 🙏🏻❤️

[@paulwinkley8852]

Hugely helpful as usual and hub is same as those found on other Fulcrum 'family' rear wheels. mine are Wind 40's. One very minor point bearing size should be 30 x 17 x 7 reference is correct. Redhill Bearings supplied Dunlop bearings which work a treat - another job done!

[@nadsim154]

Hello, front and rear bearings for the wind 40 are 30x17x7? Thanks

[@adrianfilip3215]

Your videos are so helpful!! But i can't figure out how to fit the quick release adapters on the rear wheel. I'm not shure even if I've done it correctly on the front wheel.

[@miguelba13]

Where can i find the right bearings for my racing 4 db wheels? Thanks for the video

[@fenwick458]

can you do a video for the Fulcrum 400DB front wheel please

[@sylvainbernaers]

is there a datebase where i can find all bearings specs of fulcrum wheels??? thx in advance

[@mazarikhalil2219]

Hello, Can you please give me the reference for spart parts when you removed at 2min in the video. Thanks.

[@thanhhuutrinh9344]

1:14 that ring . I lost it

[@spectrospectro3215]

Great work, what bearing is correct size 17x30x7 or 18x30x7? Thanks

[@nadsim154]

Yeah that's the question. Looks like it is 18x30x7 and this is not a size you can get from skf, ntn and so on...

[@MrSimallen]

I changed my bearings and they were 17x30x7, great video as always 👌

[@RogerRobinson79]

Hi Does any one know how to change this to QR ?

[@jannikschonfeld7025]

....can anybody help? :( Is the bearing 30x17x7 or 30x18x7 for rear wheel? And does anybody know the size for the front wheel? All historic comments about this are not very clear in my opinion... Many thanks! Jannik

[@dj.antaro]

Are fulcrum 400 db the same wheels as 4 db?

[@markovezmar5449]

Yes

[@wristdemon]

Hi, just wanted to ask is the front wheel bearings are the same size as the ones on the back ?

[@wristdemon]

@@FreeToCycle have you changed the bearings on these wheels or similar before...Just found a graft from fulcrum showing that the rear wheel uses a RP9-004 17x30x7mm and the front takes a RT-004 18x30x7mm...I guess there is quite a difference. Thanks for the response.

[@djgandy]

Just had this same issue. All removed bearings marked as 6903. Front needed Mr 18307. These were way too big for inner race of rear so trying to figure out what I need.

[@wristdemon]

I purchased the recommended 17x30x7's and 18x30x7's and fitted them a while back and have had no issues to date 👍

[@thanhhuutrinh9344]

Please can you tell me more lock ring parameters. I lost it

[@RajzingerLaszlo__RL_Laci]

Helo . Good video, What is the exact name of the key you use at 15:28?

[@RajzingerLaszlo__RL_Laci]

the shimano TL FC33 tool is the same as the Campagnolo UT-BB130 tool? or there is a minimal difference in their design and teeth. because I have a TL-FC33.