Fun on a Bun! - Bender Car Part 1

  Рет қаралды 23,693

Punished Props Academy

Punished Props Academy

Күн бұрын

Пікірлер: 162
@Kjasi
@Kjasi 3 ай бұрын
14:52 OMG, that's one of the best cameos I've seen in a KZbin video!
@punishedprops
@punishedprops 3 ай бұрын
Haha! Right?
@paniago82
@paniago82 3 ай бұрын
really great to see you having fun on youtube again.
@punishedprops
@punishedprops 3 ай бұрын
I’m having a blast!
@flippypixel
@flippypixel 3 ай бұрын
could make the head rotate with the steering might be fun. So happy to see a new project on the channel❤
@punishedprops
@punishedprops 3 ай бұрын
I will totally make the head into a puppet.
@wendynordstrom3487
@wendynordstrom3487 3 ай бұрын
When you put the head on, it made me chuckle. 😅 I'm looking forward to see the entire process!
@punishedprops
@punishedprops 3 ай бұрын
The head really sells the look.
@i.am.adrian
@i.am.adrian 3 ай бұрын
I love this so much , its already looking so good! Can't wait to see Bender driving around DragonCon!
@punishedprops
@punishedprops 3 ай бұрын
You better believe we're bringing him to Atlanta!
@Mitch3D
@Mitch3D 3 ай бұрын
Surface modeling in Fusion is really tricky, I'm glad you talked about the difficulty learning it and having to restart multiple times. In the end it looks great and look forward to seeing it painted.
@punishedprops
@punishedprops 3 ай бұрын
Thanks! Learning new stuff can be frustrating, but it’s worth it.
@Matthew_Lawless
@Matthew_Lawless 3 ай бұрын
"Really tricky" is an understatement.
@bobweiram6321
@bobweiram6321 3 ай бұрын
Yeah, it's very tough. I use solid modeling with filets and chamfers to simulate an organic shape.
@agepbiz
@agepbiz 3 ай бұрын
I love this project so far! Looking forward to new episodes
@punishedprops
@punishedprops 3 ай бұрын
It’s gonna be a journey!
@michaeldiaz6570
@michaeldiaz6570 3 ай бұрын
I love when a dream build comes together
@IssieAngela
@IssieAngela 3 ай бұрын
It's a joy to see you having fun!
@punishedprops
@punishedprops 3 ай бұрын
Thank you! 😄
@nirodha7028
@nirodha7028 3 ай бұрын
Love everything about this project
@ReedCBowman
@ReedCBowman 3 ай бұрын
Having a youtuber in your closet is a whole new level of youtuber influencer privilege.
@danthemakerman
@danthemakerman 3 ай бұрын
Really impressive work as always! You guys rock!
@punishedprops
@punishedprops 3 ай бұрын
Thank you!
@RealAndySkibba
@RealAndySkibba 3 ай бұрын
This is going to be an awesome project
@punishedprops
@punishedprops 3 ай бұрын
Thanks!
@neonnerd1364
@neonnerd1364 3 ай бұрын
Next Halloween I'm planning on trick or treating with my kids as bender. I'm going to try my best to print as much as I can to look as close to the show as I can.
@punishedprops
@punishedprops 3 ай бұрын
That’s gonna be so much fun!
@MstrCpp
@MstrCpp 3 ай бұрын
Yeeees! Absolutely agree that THIS is what it's all about! Such an amazing, specific reference!
@punishedprops
@punishedprops 3 ай бұрын
Right on!
@Justrex01
@Justrex01 3 ай бұрын
Loving the project! So much work and so much fun! Thanks for sharing with us!
@punishedprops
@punishedprops 3 ай бұрын
You’re welcome!
@aprilblackregentart6647
@aprilblackregentart6647 3 ай бұрын
Altering that chassis looked scary but you got it! Amazing!
@punishedprops
@punishedprops 3 ай бұрын
It was a little nerve wracking.
@timothykruse3362
@timothykruse3362 3 ай бұрын
Man, I appreciate you and how methodical and accurate you are... inspiring my man!!! King of Sanding!!! LOL
@punishedprops
@punishedprops 3 ай бұрын
There will be a lot of sanding.
@sublimationman
@sublimationman 3 ай бұрын
Love it, great work, can't wait to see more.
@punishedprops
@punishedprops 3 ай бұрын
Thanks!
@tommysimpson6662
@tommysimpson6662 3 ай бұрын
14:55 a very unexpected cameo Love your channels
@punishedprops
@punishedprops 3 ай бұрын
Thanks!
@wowtomrealcool
@wowtomrealcool 3 ай бұрын
Love this! Such a cool thing to bring to life. Nice edit with the projector screen too 😁
@punishedprops
@punishedprops 3 ай бұрын
Thanks! We had fun with this one.
@maartjevancaspel
@maartjevancaspel 3 ай бұрын
It is turning out fantastic! 👏🏼😍
@punishedprops
@punishedprops 3 ай бұрын
Thank you!
@blizatrex
@blizatrex 3 ай бұрын
It is looking really great. the body looks almost vacuformed. Cardboard Bender looks quite happy in there.
@punishedprops
@punishedprops 3 ай бұрын
Oh, he's pumped.
@pluckylump
@pluckylump 3 ай бұрын
Looks fantastic!
@punishedprops
@punishedprops 3 ай бұрын
Thank you!
@DannyMcHugh
@DannyMcHugh 3 ай бұрын
Oh fantastic! Can't wait to see more of it!
@punishedprops
@punishedprops 3 ай бұрын
I’m so excited!
@MatthewBowe
@MatthewBowe 3 ай бұрын
We all need a closet Joel.
@punishedprops
@punishedprops 3 ай бұрын
Right??
@sjmaguirepdx
@sjmaguirepdx 3 ай бұрын
So AWESOME!!!!! Also, hi Joel!
@punishedprops
@punishedprops 3 ай бұрын
Thank you!
@Alabastor_Twob
@Alabastor_Twob 3 ай бұрын
15:50 It looks like the alignment holes might have covered over with the brim that you added (and maybe filled in with support material too?) If it's a bother it might be worth checking in the slicer if there's a setting for that - I know in Cura at least there's a checkbox called "Brim Only on Outside"
@punishedprops
@punishedprops 3 ай бұрын
Awesome tip, thanks for sharing!
@PatDooley50
@PatDooley50 3 ай бұрын
this is so impressive!
@punishedprops
@punishedprops 3 ай бұрын
Thanks!
@Bananaboogiebone
@Bananaboogiebone 3 ай бұрын
Brilliant Bill
@punishedprops
@punishedprops 3 ай бұрын
Thank you!
@joshmcdonald9176
@joshmcdonald9176 3 ай бұрын
This is rad
@punishedprops
@punishedprops 3 ай бұрын
Thanks!
@gokalpcetin2769
@gokalpcetin2769 3 ай бұрын
If you were going to cut the car in half to fit the scale wouldn't it be easier to go with 1/10 scale and widen the car instead of getting right width and shortening the length ? Great project, very excited to see how it will turn out :D
@HawkWorley
@HawkWorley 3 ай бұрын
Glazing Putty and Acetone. A few thin coats will save you a lot of sanding!
@punishedprops
@punishedprops 3 ай бұрын
Neat tip!
@rayloftus4066
@rayloftus4066 3 ай бұрын
Hi bill. I've only just realised after all these years of watching you and Britt that you have the perfect name for what you do; Bill'd uran. ha ha ha
@anthonyp4209
@anthonyp4209 3 ай бұрын
He's Back Baby!
@punishedprops
@punishedprops 3 ай бұрын
Booyah!
@mothmansuperfan7513
@mothmansuperfan7513 3 ай бұрын
Agreed on the 3D Spacemouse. I use one daily for work (or I would be if I wasn't slacking off and commenting on KZbin)
@punishedprops
@punishedprops 3 ай бұрын
I really love it!
@FranktheBlindArtist
@FranktheBlindArtist 3 ай бұрын
Awesome
@andrewb9590
@andrewb9590 3 ай бұрын
“Don’t need the spoiler.” Bite your tongue! How will it go fast? Lol. Seriously, nice work. Especially for something that appears in one scene. 😁 Also, electroswing soundtrack is great!
@punishedprops
@punishedprops 3 ай бұрын
Gotta reduce the drag coefficient! 😂
@VayaconChupacabra
@VayaconChupacabra 3 ай бұрын
3DCONNECION makes fantastic 3D mice. I've got the Space Mouse Pro and it is an absolute must in modeling work. Going on 8 years now. What would I do without it?!
@punishedprops
@punishedprops 3 ай бұрын
It's a really fantastic device!
@seekertosecrets
@seekertosecrets 3 ай бұрын
0:57 That was unexpected! 14:55 Wait, What? What's Joel doing in there?
@jonathan__g
@jonathan__g 3 ай бұрын
Will you be doing the seats/steering wheel too? This turned out so good I can't wait to see how it goes.
@punishedprops
@punishedprops 3 ай бұрын
No room for that with a Bender head in the way.
@deerel
@deerel 3 ай бұрын
1:21 Hey! Spoiler alert, please!
@WillLaPuerta
@WillLaPuerta 3 ай бұрын
When I was a kid I made a Dalek out of a radio controlled car, a trashcan, LEDs, and other random junk. Using a 3d printer wasn't even a whiff of a dream for me back then...
@punishedprops
@punishedprops 3 ай бұрын
That's awesome!
@chrisgalloway4900
@chrisgalloway4900 3 ай бұрын
You could also get magnetic body posts for it if you don't want to worry about screwing it on and off everytime
@punishedprops
@punishedprops 3 ай бұрын
That's a pretty good idea!
@Cullens_Workshop
@Cullens_Workshop 3 ай бұрын
the import question, will this be competing in the tea cup race at dragon con?
@punishedprops
@punishedprops 3 ай бұрын
Maaaaybe?
@larryu3727
@larryu3727 3 ай бұрын
Bill, what is that screwdriver that you used to put in the screws to the grey bracket that you printed? I kept backing up to try and see if I could find out what it was. Keep up the good work on Bender!
@punishedprops
@punishedprops 3 ай бұрын
Thanks! That's Giaco Whatever's Kinetic Driver I got when he had a kickstarter: placedatoms.com/en-us/products/kinetic-driver
@Shae_Sandybanks
@Shae_Sandybanks 3 ай бұрын
Amazing
@punishedprops
@punishedprops 3 ай бұрын
Thank you!
@aaronpmcbride
@aaronpmcbride 3 ай бұрын
Fantastic!! Can’t wait for the next instalment. Will the 3D files be made available?
@punishedprops
@punishedprops 3 ай бұрын
I doubt anyone else will want to make this, but if anyone reaches out, then I would be happy to share.
@o.k.productions5202
@o.k.productions5202 3 ай бұрын
Was that circle template arranged in the golden ratio?
@philabot
@philabot 3 ай бұрын
Again, looking forward to seeing the finished product. But, I must say “not to bad with cardboard”
@punishedprops
@punishedprops 3 ай бұрын
Cardboard is so great for quick, cheap prototyping.
@user-ur7rb5ln4x
@user-ur7rb5ln4x 3 ай бұрын
Random question….. can you make the mask from the phantom of the opera😃
@Rainiiru
@Rainiiru 3 ай бұрын
missed opportunity to have a frunk (front trunk) for all of benders stolen goods!
@punishedprops
@punishedprops 3 ай бұрын
That’s a pretty clever idea!
@TheSonofruss
@TheSonofruss 3 ай бұрын
they do have magnetic body mounts that might help you out later
@punishedprops
@punishedprops 3 ай бұрын
Ooh neat!
@buzz.b
@buzz.b 2 ай бұрын
Why was a larger car bought and cut down to size instead of making the smaller one larger?
@techristopher8077
@techristopher8077 3 ай бұрын
OH, the ideas you sparked
@punishedprops
@punishedprops 3 ай бұрын
Excellent!
@crash0zero
@crash0zero 3 ай бұрын
I may be getting ahead of the video, but are you going to put a swivel motor under Bender's head, so you can spin it around while driving the car?
@punishedprops
@punishedprops 3 ай бұрын
Yes! 😄
@billbucktube
@billbucktube 3 ай бұрын
Like it‼️
@punishedprops
@punishedprops 3 ай бұрын
Thanks!
@svenhohne2697
@svenhohne2697 3 ай бұрын
Hey Bill, good to see you again, it's been a while. Maybe one Idea concerning the reinforcement of the seams of the 3D-printed parts on the body: what about glassing over from the inside, just a small strip of about an inch or 1.5 wide? We did this very sucessfully on the prototype shop at BMW on some 3DP-Parts we had to produce in sections and bond together. BR, Sven.
@punishedprops
@punishedprops 3 ай бұрын
I was considering that. I’m not sure it’s necessary, but I can do that at any time after it’s constructed.
@cowboy124aa3
@cowboy124aa3 3 ай бұрын
Hey Bill great work! Also just curious what 3d scanner did you use to get your model?
@punishedprops
@punishedprops 3 ай бұрын
Thanks! I used PolyCam.
@alfgundersen1058
@alfgundersen1058 3 ай бұрын
Yes yes yes 😂😂😂😂😂😂super cool 😅👍👍👍👍👍👍👍👍👍
@punishedprops
@punishedprops 3 ай бұрын
Woohoo!
@jmorv8866
@jmorv8866 3 ай бұрын
Look'n good! Do you plan to animate Bender (turns head, moves eyes)?
@punishedprops
@punishedprops 3 ай бұрын
I sure do.
@ericosnes9371
@ericosnes9371 3 ай бұрын
Wow! Any chance you can make it so Benders head can rotate?
@punishedprops
@punishedprops 3 ай бұрын
I want to make the head fully animatronic.
@ericosnes9371
@ericosnes9371 3 ай бұрын
Oh man! That’s gonna be awesome.
@tobynmanthorpe
@tobynmanthorpe 3 ай бұрын
Where did you get that 3DPrinting Nerd? Amazon?
@punishedprops
@punishedprops 3 ай бұрын
Costco, actually. Had to buy a 6 pack.
@vampireblackhunter
@vampireblackhunter 3 ай бұрын
What is that tool you are using at 3:52?
@punishedprops
@punishedprops 3 ай бұрын
That's a circle drawing template. It was a gift, so I have no idea where to find that particular model.
@MasterChef12109
@MasterChef12109 3 ай бұрын
next the Bender Pharaoh Pyramid with the flamethrowers in the eyeballs?
@MasterChef12109
@MasterChef12109 3 ай бұрын
*asked with a straight face
@punishedprops
@punishedprops 3 ай бұрын
Haha! I love it.
@C3DPropShop
@C3DPropShop 3 ай бұрын
Hey Bill, what are you using to scan your parts? Im wanting to try scanning. I have a Samsung s23 ultra, if that matters.
@punishedprops
@punishedprops 3 ай бұрын
I use Polycam: poly.cam/
@timothyvolkers5343
@timothyvolkers5343 3 ай бұрын
At the 3:15 minutes mark you should have said too the band saw boy wonder.
@punishedprops
@punishedprops 3 ай бұрын
Holy power tools Batman!
@johnpaulporrelli6208
@johnpaulporrelli6208 3 ай бұрын
So are you dressing up as fry for any cons you go to. That would be epic
@punishedprops
@punishedprops 3 ай бұрын
That or Scruffy. 😄
@johnpaulporrelli6208
@johnpaulporrelli6208 3 ай бұрын
As always a great looking build, always inspiring me in my attempts at pieces
@tilek1983
@tilek1983 3 ай бұрын
what kind of bandsaw is that?
@punishedprops
@punishedprops 3 ай бұрын
A horizontal bandsaw. Mostly used for cutting metal stock to length.
@RobertWardJones
@RobertWardJones 3 ай бұрын
Great Idea. However instead of cutting the car in half and rejoining the halves why not just trace the profile of the back, trim off the back, then machine the new back end to what you had cut off? Would have saved you a bit of time and you could have use the back end you had cut off as the templet.
@punishedprops
@punishedprops 3 ай бұрын
That would have worked well too. Didn’t think of it at the time.
@Wico90YT
@Wico90YT 3 ай бұрын
You need John to sign this for you
@punishedprops
@punishedprops 3 ай бұрын
That would be cool!
@ura-bedash.rantan1224
@ura-bedash.rantan1224 3 ай бұрын
面白いなぁ☺️❤
@punishedprops
@punishedprops 3 ай бұрын
Thanks!
@cycoholic
@cycoholic 3 ай бұрын
You will want to change the motor, as that one will be to fast for inside use. I suggest you get one for an RC crawler, and maybe change the gearing.
@punishedprops
@punishedprops 3 ай бұрын
Ooh, great idea.
@cycoholic
@cycoholic 3 ай бұрын
@@punishedprops It will help slow the car down, even to walking speed. RC crawlers are a segment of the market where they go for things like accurate scale and going rock crawling.
@umbraelegios4130
@umbraelegios4130 3 ай бұрын
I can almost hear that wicked laugh and hear " Bite my shiny metal ass.". It would be cool if he could actually say quotes from the show.
@punishedprops
@punishedprops 3 ай бұрын
That's the plan!
@cfxJosh
@cfxJosh 3 ай бұрын
You want that body much higher. the axels should not be centered with the suspension unloaded!
@punishedprops
@punishedprops 3 ай бұрын
Right on. I’ll be able to adjust the height once I have the wheels.
@niels73
@niels73 3 ай бұрын
Spoiler alert! The back fin will be removed
@poetgriot18
@poetgriot18 3 ай бұрын
Honestly thought you were going to make the wearcar.
@punishedprops
@punishedprops 3 ай бұрын
Haha! I love it.
@Koto-Sama
@Koto-Sama 3 ай бұрын
Please, add a servo to the head so it can look left and right 🤣
@smittysbuilds
@smittysbuilds 3 ай бұрын
i'm 40% printed.
@punishedprops
@punishedprops 3 ай бұрын
40% PETG! =D
@kalliste23
@kalliste23 3 ай бұрын
All this talk of AGI and humanoid robots I'm going be sorely disappointed if somebody doesn't start mass producing Bending Robots. As for the Lucy Luibots...
@punishedprops
@punishedprops 3 ай бұрын
More Benders?? Chaos! 😂
@AustralianMurderTurtle
@AustralianMurderTurtle 3 ай бұрын
Spoiler warning... this video has one.
@punishedprops
@punishedprops 3 ай бұрын
Only one and we got rid of it right away. 😂
@JonMadsen70
@JonMadsen70 3 ай бұрын
:)
@plutoyaldnil4750
@plutoyaldnil4750 3 ай бұрын
If you want some REAL FUN ( I know cause I have an r.c. car that does this) run linkages to the steering servos to benders head so it will rotate along with front wheels😂😂😂😂
@punishedprops
@punishedprops 3 ай бұрын
That’s a really great idea!
@catbob1966
@catbob1966 3 ай бұрын
*sigh* yay, someone sitting at a computer moving a mouse around. I know y’all are hostages to the content algorithm but nothing will be missed by skipping the design and 3D modeling process.
@Synth_DIY
@Synth_DIY 3 ай бұрын
I mean, I found the idea of doing it via surface modelling the most useful bit so 🤷
@punishedprops
@punishedprops 3 ай бұрын
It was important to me to share some of the struggle, because a lot of people are trying to learn how to 3D model and it can be frustrating.
@Dashierez
@Dashierez 3 ай бұрын
$300 for that cheap looking RC truck? wth...never in a million years would I ever pay that for that, let alone if I'm ripping it apart. Easier and cheaper to just make a bigger frame for the smaller one to get it to the size you needed - especially since you don't need to care what the inside looks like. You could get a helluva RC f'ing plane or drone for that amount of cash.
I'm 40% PETG! - Bender Car Part 2
7:54
Punished Props Academy
Рет қаралды 16 М.
I put World's Biggest Motor in $4,000 RC CAR
28:56
Kevin Talbot
Рет қаралды 491 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
When you have a very capricious child 😂😘👍
00:16
Like Asiya
Рет қаралды 18 МЛН
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
It Really Squirts!
38:23
Punished Props Academy
Рет қаралды 33 М.
Custom Transformer Shatters All Voltage Records (ft. 3D Printing Nerd)
21:23
I 3D Printed a $1,224 Chair
23:56
Morley Kert
Рет қаралды 2,5 МЛН
Have you been using my toothbrush to polish your Trunk again? - Bender Car Part 6
14:11
Our BIGGEST project yet! (SPIDER MECH!)
29:27
Hacksmith Industries
Рет қаралды 12 МЛН
So Long, Coffin Stuffers! - Bender Car Part 3
33:02
Punished Props Academy
Рет қаралды 19 М.
Soft and Firm into One Very Satisfying 3D Print
18:32
NeedItMakeIt
Рет қаралды 24 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН