Furnace Not Working - The Most Common Fix

[@WordofAdviceTV]

⭐ More Videos That Can Help: Top 5 Furnace Problems and How to Fix Them: kzbin.info/www/bejne/imWsiKeBrpJgjM0 Flame Sensor Troubleshooting: kzbin.info/www/bejne/Y4Kuea1ngttse9k Furnace Parts and Functions Explained: kzbin.info/www/bejne/nX-Qhnyoa51latk Thermostat Not Turning on Heat: kzbin.info/www/bejne/ZmaXlIWpoMqba80 Blank Thermostat Screen: kzbin.info/www/bejne/rJqWgH2rfMuUl8U Furnace Error Codes Explained: kzbin.info/www/bejne/gGm9lpqjabl2oq8 Furnace Sequence of Operation (important to know): kzbin.info/www/bejne/d4KnkICbma6eoqs

[@alwillis4847]

4 years later and still making an impact on lives!!! Woke up at 4am to a 60 degree house in a Michigan winter! Ran around placing extra blankets on my kiddos and immediately found your video! Only had a $2 bill in the house that I won a few months ago but I guess it truly was lucky!!! Heats blowing and temp is rising!!! Thanks a million times!!!!

[@hobbes1031]

Weather lady says a snowstorm is coming. It’s currently 36° and temperatures are dropping. My wife and kids keep saying it’s getting colder and colder. I’m ignoring them and then I start to notice that it is getting colder. I check the thermostat at 68° in the house but the desired temp is on 74. I must say everything that you described in your video between the cycling on and off cutting and then off for three hours to the letter was happening. I went through your entire instruction video with my son and in less than 15 minutes we had the furnace up and running again. I thank you so much. I am a subscriber, liked &commented. I appreciate it. God in your heart, peace in your thoughts and dreams. Job well done ( impressive that this video is 3 years old and still informative and effective)

[@Niftynefty]

I had the same issue but with my AC watched his video and I had my AC back in 30 min. I really feel like I own him so I subscribed and have been watching his videos just to learn. I always given a like.

[@nineteenfortyeight]

Why were you ignoring them??

[@terrancebyrd9333]

This guy is definately the best I have seen. He is not annoying and he gets to the point.

[@joeyxu5887]

yeat he getting alot detail stuff and also the camera girl doing great job. both have to combine make even more easy to understand.😄😃

[@MrDogata]

Goodman furnace lighting

[@TheBlkac1]

That's why I subscribe to the channel😎😎

[@pearlkonesky9482]

Very well put Terrance ! My feelings EXACTLY.

[@JustBeYouooh]

Except the long intro video

[@fameekajenkins660]

Sir, I sincerely thank you and have the upmost respect for you and your scholastic provision! I am a single mom and when these type of break downs occur, I pray to God for a way to resolve them. In this instance, my furnace stopped blowing hot. I was guilty of forgetting to change out the filters, so they were indeed dirty. Your repair guidance defined the issues and provided me with the knowledge and skillset to resolve it within a matter of minutes. I can only imagine what you saved me in charges I would’ve incurred from an HVAC tech. Needless to say, I’m forever grateful to your angelic covering during this obstacle.🙏😊

[@timklassen371]

-30 here this morning (Winnipeg Canada) and out for my morning skate when my wife called and the house is only 17C and the furnace wasn't working. Rushed home, wife had every elec heater she could find on, oven on, oven door open and fireplace burning on full. I panicked, (Sun AM) then watched the above video and amazing, cleaned the sensors and the furnace is up and running. THANK YOU for the help and the added "husband" points I earned from my wife!!!!

[@WordofAdviceTV]

Awesome! Happy to hear the furnace is back up and running! :) Stay warm!

[@pwdrhrn]

Lucky man.

[@erics5847]

THANK YOU!!! Its Sunday. My furnace is not working and the temp tonight is going to be 37 degrees. I cleaned the sensor and the furnace fired right up! You just saved me $$ and a long cold night.

[@kozakoutdoors7305]

Thank you so much! $8.50 for drill bit extended, $1.00 for cleaning sponge, about 30 minutes of trying to convince my concerned girlfriend that I probably wouldn’t burn the place down, 10 minutes of following your tutorial, and we have heat after being cold the past few days AND saved us a ton of money! Thanks again!

[@WordofAdviceTV]

That's awesome! Happy to hear you were able to get it fixed! Thank you for leaving a comment, stay warm!

[@OathKeeper1506]

You need a new girlfriend if she has such little faith in you. Women are ridiculous prima donnas. Next time tell her to fix it. Erm, equality and all.

[@trayday2389]

You are a true life saver...my heater went out on a snowy morning & I have 2 young kids, one only 4 so I was worried about their safety but I watched this video & followed your instructions & just like that my heater is back to business!!! Can't thank you enough, your a true blessing!

[@phillipcristinziani]

Good. Film

[@ejmvideo1090]

Fantastic video! I called what I thought was a reputable local HVAC company On a Friday to do a tune up on my Lennox forced air Gas heater. Since they couldn't come out until Monday I searched around and found your video. I have a 5 burner system and only 2 of them were working. After viewing your video I knew exactly what would be done in a cleaning and tune up. HVAC tech arrived and ran his vacuum in the heater for about 10 min. He called me in for the bad news. I needed a whole new heater to the tune of appx $7,000 USD. He said it was beyond repair. I said he did nothing on the tune up list and got his boss to refund the service call fee as it was really just a sales call. I then did the tune up steps you outline but instead of cleaning the burner I just bought a new one for $84. Just installed it and everything is working great. Thanks again for your fantastic videos!

[@bobmanp8653]

crooked bastards

[@leandromarley53]

you probably dont care at all but does anyone know of a way to get back into an Instagram account?? I was dumb lost the password. I would love any tricks you can give me.

[@lawsonjaziel9884]

@Leandro Marley Instablaster :)

[@leandromarley53]

@Lawson Jaziel i really appreciate your reply. I found the site thru google and im waiting for the hacking stuff atm. Takes a while so I will get back to you later when my account password hopefully is recovered.

[@Teedys]

Thank you, I am a single grandma raising my infant grandson and because of your help I was not a victim of an over priced heating salesman/repairman.

[@mhill2176]

How do you know it's overpriced? It is extremely expensive to run an HVAC service company. They don't set the prices to make a bajillion dollars they set them to keep the doors open and pay their employees off.

[@milanerturk6592]

@@mhill2176 so true!!

[@Yocole5]

Yes ma’am glad you found this, many companies (especially dealing with ac) charge 80-100 just to show up (no way to get around it but still very high) then mark up the part, then might even throw In a 30 dollar charge for 5 minutes of labor. For the other commenters here some companies are honest but no sense in paying 80 for someone to show up then mark up a product someone could get for 20-30 and put in themself. I renovate houses and have dealt with dozens of companies for numerous situations and it’s wild the range of proves companies will charge for replacing a cheap part.

[@payasalopez]

It is because school , tools are very expensive and is around 5 years to graduate

[@DiggiDog420]

Knowledge costs 😇

[@phillipkennedy8028]

My wife and I are first time home owners and being quarantined to the house with all this Corona virus this video helped us stay warm and save money! Thank you so much!

[@AndrewVolk82]

Phillip Kennedy ha! same boat. Stay healthy!

[@phillipkennedy8028]

@@AndrewVolk82 You too man!! Best of luck!! This video was very helpful, no if only he had videos about the hot water tank that wont stay lit

[@tobyhayes611]

My furnace quit firing yesterday. I watched your video and cleaned the flame sensor. This fixed the problem and the furnace fired and ran properly. Thanks for saving me from an overpriced repair.

[@Alawicous]

100% the problem we were having. Woke up to a 50 degree house this morning and had been having some furnace troubles previously but could manually toggle the temp to get it going until today. Nothing would get the furnace to fire and stay lit. Watched the video, went downstairs, 15 minutes later and no money spent we’re back up and running. THANK YOU

[@user-yn8us8cc3h]

My furnace was doing this very same thing. It was going to be in the low 20’s tonight and it was getting colder in the house. I cleaned the sensor with a one dollar bill I had just like he said. And the furnace is working perfectly now! He knows his stuff! Thank you so much for making this video!!!!

[@MrGritz7]

So I bought an old house that I'm living in while I renovate. I've been able to troubleshoot and repair the old 1984 Lennox with the help of your videos and a few others. Thank you for taking the time to share this info. I've definitely developed more respect for the HVAC trade, as well! Thanks again!

[@thaispiration]

It’s a single digits outside and my house reads 60 degrees at 2am. My furnace is 20years old and was not kicking on. I did a search and came across this life saving video. Saving from all of us freezing to death and saving us money from burst water pipes and repairs. After watching the video and cleaned up the sensor rod and it works!!! Now our house is at 69 degrees this morning!! I really appreciated it with this type of video. Following you now!

[@Shotta72090]

This helped me last night. I've been in my house 1 year. The furnace would turn on and the flame would stay lit for maybe 10 seconds. I cleaned it and it stayed lit for the full cycle. Thank you so much! My house is much warmer now.

[@joefonseca2357]

This is the one of the best explanations I've seen regarding how a furnace works. He explained everything you need to focus on without over doing it. To the point and stayed on subject. Great video

[@dawnsara2566]

I wish this guy did every single KZbin video known to mankind. Quick, To the point, doesn’t skip over pertinent info and explains everything in laymans terms!

[@GrowBettaBlues]

You just saved me a $75 service call fee and only God knows how much more! I fixed this problem just by following your instructions. Thank you and God bless you!

[@WordofAdviceTV]

I'm happy to hear that! Thank you for leaving a comment, stay warm! God bless you and family as well!

[@backester_singhaman6914]

lol first American warranty?

[@rvasquez6870]

@@backester_singhaman6914 yupp I had them biggest scam ever .

[@TheJetty2007]

@@WordofAdviceTV I'm having problem with my furnace , I think dust got to it , it only blow cold continuous , the code is saying ignitor but it looks ok any advice?

[@jmlockwood22]

This was SO helpful! I am 9 months pregnant and noticed I was getting cold with our heater staying on. Noticed the furnace would ignite and not stay on, so came on here, found your video and it worked! I am now warmed back up and it was so easy to do. Thanks!!!

[@THE_REACH]

Just fixed my unit following your video to the T! Plus it’s winter here in Philly so my wife and I were freezing! Thanks for helping me be the hero Husband!

[@aceanthony63]

This video saved me a call! Thank you so much. My sensor was 100x harder to get at lol. You made it look easy but every furnace is different. Videos like yours help us homeowners to not get robbed!

[@WordofAdviceTV]

You're welcome! Oh boy, I believe it! Some furnace flame sensors are really hard to get to. Good to know that you were able to get it, stay warm!!

[@BubbaGooder]

Sweet! My furnace is now WORKING! 8pm with temps of 17, sooooo glad I watched this video. Thank You!!! Mine was the flame sensor. Scrubbed it just like you did and now everything is working perfectly!!

[@MoMartz09]

As a mechanic, I can appreciate a well explained DIY help video like this one. Well done, sir. Thanks for your help!

[@arahleegausman2574]

I’m a 67 Year old woman and this fixed my furnace. Thank You so very much. I’m handy but have never looked in the furnace.

[@tube396]

I'm a retired plumber & gasfitter and I worked on many gas appliances over the years. I would like to compliment you on your video. Your explanation was bang on. I don't think I could of explained things any better than you did if I was making the video.

[@trevorsaul]

Came home tonight with my wife and baby to a freezing cold house. Found your video after a quick search, followed your steps and had the house warmed back up within 10 minutes of getting home knowing nothing about furnaces before I started. My family thanks you :D

[@rampantgravity9348]

Like many others here, I have to send some HUUUGE thanks. House was freezing all week and didn't even know where to begin troubleshooting, but I watched this, and a few minutes of work, the furnace is working great and it saved me a good bit of money having a guy come out to look at it. Thanks!

[@robingilbert4508]

One of the best Equipment troubleshoot videos I have ever seen...simple, to the point and lots of information in a short time...keep up the good work and post more such videos please...

[@WordofAdviceTV]

Thanks Robin! Glad you liked the video :)

[@alexjohn8257]

I couldn't have said it better myself. Helped me identify and remedy the AC issue at my retired mother's home. Excellent job.

[@mtericktucson]

This got me going, and I agree he is terrific the way the gets to the point.

[@Braxtongaming9]

Thanks so much it worked

[@markrenton1093]

@@WordofAdviceTV , I have corrosion on the connector to the flame sensor , will cause a problem?

[@infiniteuniverse123]

I had a weird situation. The heat worked upstairs but not down. The lights did indicate the flame sensor. It was as easy as it could be to see and get out. Cleaned it. Lights blinking normal. Downstairs heat working. You are the man! No other video nailed it like you did. Thanks!

[@jasonbiswell1998]

Absolutely great KZbin channel! Got my furnace up and running by cleaning this flame sensor. Probably saved $200. Now I'm gonna order a new flame sensor on eBay for $6. Watching more videos on this channel just to educate my old ignorant self. Thanks so much!

[@Timetraveler1111MN]

Ohh thanks for sharing you can order one and it’s such a inexpensive part! Good to know.

[@Godistheanswerministries]

My furnace was experiencing the same problems. But after watching the video and following your instructions. I now have a furnace that is working. Thank You.

[@Nik-by5mi]

YO BRO!!! My furnace stopped working on Christmas Day!!! at 2am in the morning we woke up Freezing!!! Found your videos and this one was my exact symptoms. Dirty Flame sensor!! Cleaned it like your video said! Scotch brite pad..not money..lol And my family thinks I'm a HERO!!! Thank you from NY... How is Hawaii going!! post more videos! Счастливая! С Новым годом!

[@noechaparro2213]

Ññ

[@annwilson3941]

Going to try!

[@mauriciodantas4671]

My furnace was working for 10 seconds and shut it off by itself. My flame sensor was dirty and I cleaned the way you did and thanks to you is working fine now!! God bless you!

[@clashingeternity9141]

Just bought a house, turned on the heat for a snow storm that came through. House has been down to 58 degrees today. Been messing with it for hours with no improvement. Right when I was about to call a hvac guy I stumbled across your vid. Thirty second fix and now my house is 70 degrees again! Saved me probably hundreds of dollars. Thanks, sub earned.

[@WordofAdviceTV]

Happy to hear you were able to get it fixed! :) Thank you for subscribing and leaving a comment, stay warm!

[@panduka7777]

Bro, you saved me close to $500 by educating how to troubleshoot a short and finally locating it as the AC Contactor. Cost me only $20 for AC Contactor and $7 for a pack of 3 Amp Fuses. Superb video and excellent instructions! Wish you all the best...

[@dBradbury]

Snow storm just hit Oregon over Christmas and our furnace stopped blowing heat. Cleaned the flame sensor and bam, flame staying on again and house is heating up. Thank you!

[@nicholasaustin2717]

You saved me $150 and 4 days without heat. I am mechanically inclined, but have never touched a furnace prior to yesterday. I had the HE model not shown in the video, but your instructions were clear enough to complete the task. Thank you!

[@scottbarrett4753]

Just fixed the neighborhood's furnace in 10min. You are awesome.

[@anniemccowan9902]

Okay. So you just saved me SOOOO much money and I thank you from the bottom of my heart. Coldest night of the year here in the PNW and my furnace decided to quit. I noticed it was coming on but the blower was not, and it kept shutting off then turning on again 30 seconds later, but the blower never worked. After looking at several websites, mostly for HVAC companies who wanted to send someone out, I stumbled upon your video and your mention of the most common problem - which turned out to be my furnace's problem! After a little fumbling around and seeing that the flames never lit, I found the sensor, gently scraped it with some fine sandpaper, and replaced it in its spot, and voilà! I FEEL SO EMPOWERED. And so grateful to you. THANK YOU THANK YOU THANK YOU

[@Ratlins9]

Can’t thank you enough, it’s been a bit of a struggle to make ends meet at times. The last thing I could afford was a repairman coming out to fix my furnace but your video worked and my family had heat. God Bless you.

[@WordofAdviceTV]

I'm happy to hear that! :) Thank you for leaving a comment, stay warm! God bless you and family as well.

[@rafaelnahari6538]

Thank you so much for this video I saved money and time. my heat wasn't working over the weekend after watching your video my heat was fixed within 5 minutes. Thanks again,

[@MiccaThompson]

Same here, thank you!

[@stripeytawney822]

Yet another homeowner who you helped out sir. Was looking at buying and replacing f.s. to see if it would fix my problem... in my hot water heat. The f.s. is also the igniter in my setup, 75 bucks and a week away off the internet. Scotchbrighted it and the thing is working again.

[@luciomarcantonio6475]

This video was absolutely PERFECT. My furnace was the same as the one in the video, but, without your step by step instructions I would have had no idea. THANK YOU so much sharing your expertise. It is great appreciated.

[@rjkulman8990]

just want to add my 2 cents.... your video saved me a major headache, removed the igniter, cleaned it, and back in business, new one ordered, seems the new ones last 2 yrs, tks to amazon for keeping order history... thanks very much - clear and precise instructions

[@malcolmar]

Thank you! Thank you! COVID hit hard and the last thing we needed was an expensive repair bill for our heater and we need our heater to stay warm and not get sick. I followed your advise and heater fixed. A dirty flame sensor was the problem. Thank you again and God bless you!

[@raneebelmont6818]

Thank you for this!!!! I had recently vacuumed the dust when changing the air filter. About one week later and the furnace wouldn't kick on. Your first suggestion of cleaning the sensor worked! I wouldn't dare do much more. So, you saved the day on this 28 degree Thanksgiving morning in Utah!

[@papaduck6919]

I'm struggling with Tramatic brain injury and we live 2 far out to get a repairman out. This video hit it right on the head, real easy to follow! My wife, 4kids & myself won't be cold tonight. It's supposed to get up to 15 degrees. Thanks for the great information.

[@johndowns7536]

This fellow just saved me $200 bucks. Followed the steps he describes and fixed my Lennox furnace. Thanks word of advice.

[@katedenton8213]

Oh my gosh...you saved us. My daughter and I woke up in the morning with 60 degrees. She was crying and I didn't know what to do. After I watched your video, we cleaned the flame sensor and finally it's working properly! Thank you so much, you are the best!!!

[@WordofAdviceTV]

You're very welcome!! Glad to hear you were able to get the furnace fixed, stay warm and have a Merry Christmas!

[@katedenton8213]

Word of Advice TV Thank you so much again!! Merry Christmas and God bless you!!

[@lemo4423]

We had the same issue and were warming up now too, thank you so much for the pointers! Got me feeling like a journeyman over here hahaha! Good day 😎👍

[@thegoldendog7991]

This fix worked for me too. Great tutorial!

[@tonykari5124]

@@katedenton8213 YESSS. ME TOO. THANK GOD FOR KZbin and the people that share their knowledge

[@t.m.c.8239]

Thank you !! I followed your well explained video after waiting all day for the technician and my house went from 67*f to 71*f. You rock. !!!

[@kansascentral4849]

You are a money saver! My heater stopped working in freezing temperatures, and I have a young child, elderly mother in law, and my wife. Being a carpenter by trade, and jack of the rest, I always go to KZbin to see if it is something that I can fix. I watched your video and followed the instructions and BAM! The heat is working. Thank you so much for sharing this video.

[@Bilmor1982]

Old Techs will put a thumbs down because they think they know it all but J takes the time to do videos like this one and help people like me beginning our journey in the HVAC industry. Thank you so much J good luck in Hawaii. God bless you!!!

[@Luuuwun]

Don't usually comment on YT vids, but this one was a lifesaver! For over a year I was dealing with a very spotty furnace that was inconsistent with ignition. I did exactly what you showed in the video and after cleaning the flame sensor, the furnace roared to life 1st try! Thanks

[@prestontalan9369]

THANK YOU! THANK YOU! THANK YOU!! Furnace stopped turning on Christmas Eve, and this video saved me $$$$ by not having to call someone to service the unit. It was the flame sensor. You are awesome for sharing your knowledge with us. Thank you and I hope you and yours have a wonderful holiday and happy new year!!!!

[@coopermurphy6422]

Just found your channel and I am learning so much! Even if I am not able to actually fix something, I am in the know when the repair person is called. God bless! Thank you!

[@Specialkrs]

I owe you a ton of thanks...You saved my bacon at 11:30pm tonight when it was only 20 degrees all day. After siting in the middle of my furnace lockout mode, I pulled the cover off and started with this video first. I cleaned the flame sensor with the kitchen green scrubby(dry of course), I reattached the mounting bolt, turned the power back on and like magic, the flame stayed on for 10 mins to get the temp back up in my house. I've tried to get an HVAC guy out in the middle of the night many years ago, good luck that's not happening these days. Anyway, nice video, you're the best!!!

[@tango4637]

Fixed my Bryant, 90% furnace this a.m.. Put the flame sensor on the round steel wheel brush and cleaned it good. Fired right up. Thank you brother!

[@sunyanming3856]

You're a lifesaver sir! My heat stopped working this morning and my house was freezing. I called HVAC and they told me just a visit for diagnosis is $90! I decided to give "wipe the flame sensor" a try cause I was desperate. It worked! You just saved me at least $100❤❤❤

[@Regdirb231]

I wanna apologize I really did doubt you I’ve been home sense 4 this morning when my husband left for work trying to fix this your the only one that helped and it was so easy I did it myself myself and my dog thank you for the warmth!

[@PA.SS1LE]

You are the man and thank you, after 2 nights sleeping with the temp outside at 4 degrees F in NY waiting for the parts store to open on Monday I got frustrated watching my elderly parents and my 6 year old son freezing so... being a technical person I said I will fix it one way or another. I looked up common causes after diagnosing the issue first, I know i had Gas, I knew I had ignition, but after a min the flame would shut off and the system would get stuck in cycle. I knew it had to be a safety sensor, or something, but 110v systems are not my specialty. so I checked all mighty KZbin that has saved me from many Automotive Issues in the past. and Wahla, the first video I clicked on was yours and you pointed me right to the problem, Older Trane 70 unit, had to take some stuff apart to get to the flame sensor (attached to the ignitor/pilot) but once I got to it, took a 3M scrub pad/sponge combo from the kitchen pantry and went to town, I put it all back together and poof! Magic Flames started to heat the house! Thank you so much sir, you certainly saved me some money and frost bite! Happy New Year!

[@nestoasani]

You are a life saver. I had low temperature on the house and the heater would not work. It was late at night and I could not get anyone out to look at. This video basically saved my life. It worked like a charm on first trial. Thank you sooooo very very much. I could have easily spent $200 for this.

[@johnciganik4747]

You are a life saver! My elderly mother called to tell me that her furnace stopped working and it is below 10 degrees today. I had it fixed within 90 minutes thanks to this video!!! Thank you

[@gregjones3660]

No... Thank you!

[@davidfetzner3066]

I have been doing Plumbing and HVAC work for 30 years and I agree 100% with video. The flame rod for the most part just needs cleaned. I have never replaced a flame rod in all my 30 years of servicing furnaces but I have cleaned 100’s. I have been on service calls after other techs that said they cleaned the flame rod. But they try to clean them with out taking them out, just scraping it with a screwdriver, all different things. Some are hard to get out, but you have to take it out and clean it with the green scotch brite pad. I have heard of technicians saying they needed replaced, and that’s because they didn’t know what they where doing. Just clean it and save the customers all that money. It might only be $10.00 for a new flame rod but it $89.00 for another service call and travel time.

[@poems_official]

My landlord just save some money. 😅 put in a work order today. Didn’t want to wait cause its 30 degrees so i watched this video. FIXED!! Thank you! ❤❤

[@Allenwolf4680]

Your videos are the absolute best. Saved me hundreds of dollars on multiple occasions. Tell me how I can send you cash and I will send it to you. Very grateful.

[@chazgates]

I literally just had this issue with my American Standard Freedom 80. I did what you said and so far everything is working great. You just saved me $ 300 to 500 for a weekend call. Thank you and God bless.

[@DiasMjD]

Thank you!! My furnace was doing exactly what you described. Pulled the flame sensor, clean it and it works now. Great video

[@Sammilynnable]

I CANNOT THANK YOU ENOUGH!!!! It’s -23c here in AB Canada and my furnace just died in the night, I found this video by googling and it worked. You are amazing thank you thank you thank you.

[@adamreeve7303]

This fixed my furnace after service tech told me I would need a full reinstall. You saved me huge money. Thank you!!! Subscribed. Great advice, explanation and video.

[@albertojquintero75]

I want to express my sincere gratitude and appreciation for taking the time to teach homeowners to solve this kind on problems. you are a truly life saver.

[@WordofAdviceTV]

You are most welcome! Thank you for the comment, I'm glad to hear that the videos have been helpful for you!

[@Jimmy_Phantom]

My furnace stopped working, so I tried this. It WORKED!!! Thank you so much..

[@gangrenebob7281]

Furnace flame kept snuffing out on startup and had the 7 flashing lights error....this was the first video I viewed......worked like a charm cleaning the sensor first crack and was done in under 15 minutes. TY for saving me a $$$ service call!

[@proudmarinemomma827]

I’m a nurse and knew about rubbing under your nose to stop a sneeze. I love that you posted that! Great to share the knowledge haha! Thanks again for this video! You helped me fix my heater today!

[@mattpeeples2515]

Thank you! Cleaned my flame sensor and my heater jumped into action. Saved me at least $100 for a service call. 👍👍👍

[@ndt270]

Great presentation. My furnace went out overnight and we awoke to a chilly house. It's fall in Wyoming, and we're in the 20's most every night now. After my trouble shooting logic failed to bear fruit, I found this video. Clear and concise explanations, and in five minutes, the heater was back on line. Thanks!!!

[@alexmkuch]

Great video. Helped me resolve my furnace issue in around 10 minutes after watching the video. Powered down, removed the flame sensor, cleaned it, put it back in, powered back up, and the flames came on and stayed on. Thank you for posting this.

[@34tab]

Thank you so much - my neighbors furnace needed a new igniter -- thanks to you I was able to check out her furnace and repair it for her.

[@proudmarinemomma827]

How kind of you. Wish we had more folks in the world who helped one another. World would definitely be a better place.

[@kwest6517]

10:00 on a Saturday night and my furnace quit. Had it checked two month ago by a plumber. Checked filters, ducts, air exchanger-no luck. Lucky to find this video and had it working in ten minutes. Thanks for the great job!

[@subituning3048]

Dude, you are so freaking awesome. This was EXACTLY what was wrong with my furnace. You’re a lifesaver 🙏

[@rpmartin2485]

My furnace hasn’t worked for 5+ years, I followed your instructions, and boom baby it’s working again. Thanks again, I can now enjoy my whole house.

[@farhadhaftani4162]

You are a lifesaver. It is freezing here in Edmonton and I could fix my furnace with your video Thanks Buddy

[@JavedKhan-xz7tc]

This guy is the best. I just saved my 100$ . I fixed my furnace my self with in 2min. It was the same problem with sensor.i cleaned it with sand paper and put it back and its start working great . Thnx bro your the best.

[@mikemaple6850]

Thanks so much for this advice! Repaired my furnace in 5 minutes. Super frustrating that an owners manual does not list simple maintenance / repair! Thank you!

[@jerrycrew3734]

Thank you so much! Endured an entire winter last year with no heat last year, but i just cleaned the flame sensor and the furnace is pumping heat again. You are a life saver 🙌🏻

[@lildeemarley5122]

Bro i did it.. I think I wanna start my own furnace fixing business now. Lol. Just joking. But I'm no longer in the cold thanks to this video. HE KNOWS HIS STUFF.

[@brendanhobbart]

THANK YOU, THANK YOU, THANK YOU, THANK YOU!! I just noticed our furnace was not working right before going to bed. I was able to get it back up and running thanks to this video. My family will no doubt thank you for not waking up in a cold house in the morning 🤗

[@realpro8817]

Fantastic real world info from a straightforward source! You're a rare bird, sir! One of your tips got my furnace fixed and it is now 10 degrees warmer in here! Thanks so much!

[@marktran630]

Thanks to your video, I have save quite a bit of money diagnosing and fixing my furnace. I have gotten a professional HVAC guy to come in and he couldn't fix my problem and suggested I replace my main board before he headed out on summer hollidays. I then watched many videos and found yours to be most helpful and following your diagnostic procedures, I was able to fix my heating problem without spending a dime. Just some time watching video. Thanks.

[@juanjimenez4533]

It's 2020 and your video just helped me and my family!!! House was freezing last night and we are about to get some snow so I was looking at a near emergency! Flame sensor had some carbon build up and now it's fully operational again! Thank you so much and God bless!

[@WordofAdviceTV]

Glad to hear you were able to get the furnace fixed! Thank you for leaving a comment, stay warm! God bless you and family as well.

[@melaniefeltsfagan1227]

Mine shuts off every year like this. It’s shut off again now and it’s freezing and won’t light. Wish me luck lol I hope this works!

[@j.smoov7220]

@@WordofAdviceTV could it also be possible that sometimes the wick can be dirty when it won't stay lit.

[@elfyocouch2154]

I don’t know if you lo

[@mikelewis4260]

@@melaniefeltsfagan1227 sounds like a possible gas valve problem. If not your flame sensor is bad.

[@egray1812]

This video was perfect! I used a paper towel and that did the job without taking anything apart. Last night it was single-digit temperatures here and this video kept me from placing a call.

[@mrsonny915]

253 people gon be cold tonight!! Dont dislike this man's awesome video for your problem. Sure saved me!!

[@WordofAdviceTV]

Thank you for that! :;) Stay warm!

[@danbrown5840]

432 people don't like heat

[@mr.k860]

You're the best KZbinr in the universe. Take note, everyone; this is how you make a video.

[@andrewveitch8515]

Thanks man. You just saved me $150 and a lot of stress. Thx to your video you posted, I was able to inspect and repair my furnace (Coleman) which had stopped working a week ago . The problem was exactly as you explained it. So grateful .

[@qzorn4440]

sweet furnace video 😎 not only great for getting the furnace repaired and working but also checking it out on a warm day before winter. 🤩 thanks.

[@peter-agreen1644]

Great video. This was exactly the problem and I was able to fix it without an expensive service call. I also appreciate the explanation of how the furnace works, how this problem develops and how to fix it. You are a born teacher. Great job.

[@leohopcroft4065]

Thank you so much for this video! It was getting really cold in here. I found your video, followed your clear instructions, now the house is warming up again.

[@brightstarrcouture2957]

Thank you! I came home from work tonight to find out my furnace wasn't working... I was freaking out because we are in the middle of a snow storm. I watched this video went down stairs did what you said and it came on immediately. Im so grateful thank you

[@WordofAdviceTV]

Awesome! Happy to hear that. Stay warm! :)

[@chrisgordon5719]

In my many years of plumbing and heating installs and service work, I was always told that the first thing to do is turn the gas valve off, then test for stray voltage. A Tick Tracer is a wonderful thing to carry around and check for stray voltage. It only takes Milliamps to kill you.

[@BleachedPink1111]

Haha, this was my exact situation today. Woke up to a cold house, we're in a snowstorm, and my car is taken apart being fixed today too. I was able to get the heat fixed so far today. Now onto the other things.

[@Arcosjesus686]

Me too thanks

[@RussellFineArt]

I did the paper clip on the limit switch wires and it worked perfect! Bought a new limit switch, saved me a few hundred dollars, furnace works perfect. Thanks!!

[@ashleyhurst409]

Thank you SO MUCH for creating this video!! We are so grateful to you for saving us the time and money in having to call an HVAC company!!