WOOTZ steel from staples for a stapler . Making a Japanese kaiken knife

Do you want to make a Japanese kaiken knife? This video will show you how to make a steel from staples using WOOTZ steel, and how to make a Japanese kaiken knife from the resulting steel!
If you're looking for a fun way to spend a weekend, then this video is for you! In this video, we'll show you how to make a Japanese kaiken knife from steel cut from staples.
If you want to buy one of our knives, visit our Etsy shop : www.etsy.com/s...
Instagram : www.instagram....
FACEBOOK : / fz-making-knives-30176...
KZbin : / @fz-makingknives3663
#knifemaking #forging #fzmakingknives #wootzsteel #wootz
WOOTZ steel from staples for a stapler . Making a Japanese kaiken knife

[@fz-makingknives3663]

Thank you all for your support and comments. If you liked it, don't forget to like and subscribe to the channel.

[@lonelyplanet1080]

cool idea to use the staples, I really like that pattern.... you're one of the best blacksmithing craftsman I've seen on KZbin, keep up the fantastic work 👍

[@thenotsurechannel7630]

What was the stuff you put in next to the graphite before you added the glass?

[@ВикторАкимов-к6н]

хрень сварил, одни рытвины......

[@jeremycoleman318]

Do you sell your knives?

[@MDAlameinsodar]

😢😂❤🎉🎉❤🎉❤🎉❤😂😂❤🎉❤❤😂❤❤❤❤❤❤❤❤❤😂😂😂😂😂😂😂❤❤❤❤❤❤😂😂❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@hbhfdvhj1753]

تحياتي لك عمل يستحق التقدير سكين في غاية الروعة

[@aleksandrkhodakov5936]

Делать спуски в ручную,без приблуд,без кондуктора, Это конечно моё почтения!!! Респект!!!

[@НиколайКлипилин]

Як завжди супер!🔥 Дякую вам за цікаве відео!👍👍👍

[@ethanguinn5441]

Wow that’s amazing! Do you think that a coffee etch could bring out the pattern even more? I know it works on Damascus, but I don’t know about wootz steel.

[@svarogzzz4497]

Как всегда отличная работа!

[@lairdcummings9092]

An extremely beautiful blade, even among your usual excellent productions. Also: That "North Pole" was very creepy, and deserved to be sliced up.

[@omarabdullah4708]

The best one who makes knives

[@fz-makingknives3663]

Thanks

[@JazzReaper]

I prefer shurrap, but FZ is cool as hell

[@guillermoalfaro2714]

Hey 👋 man how are you my friend it's been awhile and I amazed how that knife 🔪 came out blessings 🙌 🙏 ✨️

[@miorfaizulsabki6667]

come on..its bad enough some people wrongly use the term damascus steel you go to another level by saying this wootz steel.

[@ExiledPiasa]

how about making a blade from your cut-offs and grinding/sanding slag?

[@iainstokes6894]

Your knives always look amazing, a true master of the craft! 👏👏👏

[@fz-makingknives3663]

Thanks 👍

[@Miko19691]

Again eye-catching craftsmanship. Знову привертає увагу майстерність.

[@davidmacfadyen165]

Always love the look of your metal, thanks for uploading

[@fz-makingknives3663]

Thanks

[@idypangilinan9785]

I love it😍😍😍💯💯💯👏👏👏👍👍👍

[@oleksandrtihomirov6979]

Гарна робота 🔪 КРАСЕНЬ.

[@otterconnor942]

Ваша майстерність виготовлення ножів просто захоплює! Ви справді талановитий ремісник. Вибачте, якщо моя українська погана, я ще вчуся.

[@thuannguyenphuc1875]

Con dao tuyệt vời! Lời chào đến từ Việt Nam!🇻🇳 hi vọng một ngày bạn đến Việt Nam chúng tôi.

[@ClenioBuilder]

👏👏👏👏👏👏🤜🤛

[@GabrielRibeiro-bg1fb]

Nice joob bro, realy incredible! Do you can make a different balisoong? like a CS Balissong ou a Karambit Balissong, wold be amazing, big fan, Good bless u

[@seyranmanafli4055]

Dear friend, I also make knife in which material

[@Joseph-Colin-EXP]

Beauty, is making wootz that much hader than day damascus? It seems mldre straight forward to me. Ever just melt an 80crv2 bar?

[@torg2126]

Have you considered making a wootz damascus longsword? I've looked around for a while, and I haven't found any examples yet, so they seem to be uncommon. You could easily be one of the first to have made one in a while.

[@lonelyplanet1080]

that pattern came out looking really good, almost that of the old style WOOTZ Damascus.... awesome job as always 👍, thank you for uploading...

[@fz-makingknives3663]

Thanks

[@Bru741iX]

It's literally how Wootz/ Damascus was made. Well, without the power tools ofc.

[@edgreywolf]

beaut

[@FriedRicePlease]

Always love the video. Could you make a chisel tip knife video, since that is something I haven't seen you make yet?

[@janusakaicare]

Une très belle réalisation de plus.👍🙏

[@hillbilly4christ638]

It never ceases to amaze me how little that ingot moves under the hammer. I am familiar with the process, but what kind of hrc is that metal before during and after the forging?

[@Eys.Mel.]

ИЗЯЩНАЯ ВЕЩЬ!

[@edgreywolf]

keep forgetting to ask what is the curved metal that you use when you first start hand sanding? a file? or a curved piece with a piece of sanding paper attached?

[@darrell840]

Ive told you many times that some of us recognize your titles as misleading. From today on i start reporting them.

[@thingsthatgobang19k]

Beautiful knife! What is that tool you used to polish the blade?

[@pemanahrasa8920]

Saya dari indonesia salah satu penggemar anda, saya belum pernah lihat golok sembelih dari bahan baja modern seperti bohler K110, N695 atau Vanadis 8 dengan pamor damaskus, apakah anda bisa membuatnya??

[@jaystock8370]

What are you using when polishing i see you do it every video but cant find the technique.

[@Pablo668]

Lovely piece of work. Your oil can has Katakana on it. It says, Mo-ta O i ru. Su to ro n gu, se-bu...nani nani.

[@masonh2764]

Is the gray stuff that you mixed with the staples iron filings or steel filings?

[@SonerBağci-y7p]

MERHABA TÜRKİYE YE BIÇAK YAPIYORMUSUN

[@Hisdudeness799]

Another bad ass blade.Bravo.

[@petryshchenkov2008]

Good job 👍

[@fz-makingknives3663]

Thanks 👍

[@PourMeAnother]

Another amazing creation!! Your skill are outstanding. A few questions: Are you using coal to as a heat course? How hot do you get the wootz when forging to keep it from cracking during the forging process?

[@humanbeanchikin]

whats the paste you put on the blade for polishing after sanding?

[@TheCenturion8404]

Love your vids man, beautiful work. You took my advice many many vids ago on the mosaic pins. Man do they “pop”. Front and rear jimping and finger choil would make the blade a badass bush knife. Great video work, thank you for sharing your time, skill set and craft with us.

[@CJ_7519]

What is that paste you always put on? Is it for sharpening, or shining?

[@HdhhdHhebdbb]

Bạn hãy làm con dao như này bằng mũi khoan đi

[@chandrashekarsrinivas8473]

I love 💕 your wonderful job.wootz thecnic is too awesome.👏👏👏👏👏👍🙏👊🇮🇳

[@fz-makingknives3663]

Thanks

[@rogeliomichel66]

Una chulada ...😁mandamelo para aca ocupo uno igualito a ese

[@akshaysuryawanshi8697]

What is the cost$ of this kind of nice? Very nice work👌

[@Cetrifuga1945]

Bello coltello giapponese croggiolo non prende fuoco 68s

[@richardschneider4775]

Great work from my favorite metallurgist knifemaker on KZbin. When you were bending the steel staples over to make the blend I wonder if you could incorporate small steel ball bearings INSIDE all staple as you fold it over. Like a pre taco. I like this design as a knife. I would use it although pricey

[@aetherseraph]

It always amazes me how dense and hard to move the billet is at first. It's almost like the grain pattern is interlocked on itself

[@RealtorCrawford]

How about making a knife from cutoffs.

[@theripper501_9]

You should get a sharpness tester to show how sharp they are

[@timothynaquin8899]

There was a duel edged dagger that i seen some years back that had an interesting grind. It was a spear point shape but only the left side of the blade was sharpened. If you flipped it over you'd expect the right side would be sharpened, but you'd be wrong. No matter what side of the blade was in your hand, the left side would be the cutting edge... Made for an interesting point

[@王自强-i2n]

波兰有个人复制出了不锈钢伍兹，不知道你有没有兴趣

[@3dwrecker_4660]

Beautiful knife mate! :O

[@vinceianni4026]

Hello FZ beautiful knife beautifully made well done

[@fz-makingknives3663]

Thanks 👍

[@bmc7423]

Yes 👍 Very beautiful

[@ricardoabreu69]

Another masterpiece by the master. 🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤

[@fz-makingknives3663]

Thanks 🤝

[@Ethan_The_Hedge_Goat]

What did the staples do do deserve that!?

[@killerbern666]

damn this is a beautiful knife 🥹

[@dakilangt.v.2180]

Wow, this video is absolutely fascinating! The art of making a Japanese kaiken knife from WOOTZ steel derived from staples is truly impressive. The craftsmanship and attention to detail are evident throughout the entire process. I never would have imagined that such a beautiful and functional knife could be created from seemingly ordinary materials. The combination of forging skills and creative ingenuity showcased in this video is truly commendable. Thank you for sharing this unique and captivating knife-making journey with us. I can't wait to try making my own kaiken knife someday

[@darrell840]

This is anything but wootz. His titles and videos are misleading. That's why I start to report his videos as misleading from today on

[@jerryjohnson4618]

Very Cool Blade !!!!!!!!!!!!!!!!!

[@ambushthesniper5729]

Another masterpiece look forward to seeing what will be next.

[@-freenbecky-101]

You making katana bujin

[@sandywibowo8430]

I like this channel

[@АзаматУэтлев]

💪💪💪

[@МАКСИМ-е3и9я]

63

[@10ss232]

Where are you from?

[@brendalindsay1904]

Oh it is gorgeously beautiful in its lines and form!

[@alexashkinazi8035]

Красиво, лайкос 💫

[@kzarnold3678]

Nicely done

[@yasminapaita9322]

Amazing process of forging !! And crafthand made !! Very sharpened blade thanks men!

[@fz-makingknives3663]

Thanks 👍

[@ขนตูดมงคล]

I love aikuchi, but why mostly aikuchi made by vg10 on middle damascus, I'm newbie

[@TheNewJacklemonkey]

No 🌶️???

[@sidneyriggs9764]

Awesome

[@aubreyholmes1235]

Perfect

[@danhart2411]

Damn thats nice , do you sell any of your knives and if so where do we go to buy them .

[@fz-makingknives3663]

Etsy shop

[@danhart2411]

@@fz-makingknives3663 nice thanks man

[@TheMagaiver40]

gostei

[@richr7604]

Wow, a blade outa staples. Who'd of thunk of that? Great job!!👍

[@fz-makingknives3663]

Thanks

[@bodiejay2859]

Absolutely incredible. Very beautiful knife. ~Kevin

[@fz-makingknives3663]

Thanks 🤝

[@jamesperkins9833]

Beautiful

[@fz-makingknives3663]

Thanks

[@T_B]

NICE!!

[@fz-makingknives3663]

Thanks 👍

[@MASI_forging]

Absolutely incredible 👍👍

[@fz-makingknives3663]

Thanks

[@Solved-with-an-Axe]

Great profile!

[@fz-makingknives3663]

Thanks

[@brchinggaming3784]

Amazing 😍🇰🇭

[@fz-makingknives3663]

Thanks

[@leonjones7487]

Lovely work

[@fz-makingknives3663]

Thanks

[@azizmaga3334]

Спасибо,получил удовольствие от просмотра👍🏻

[@Uriy_Kobzar]

Very nice.

[@fz-makingknives3663]

Thanks

[@gabrieldeoliveira771]

Muito linda! Adorei o design

[@oferbechor1579]

What a beautiful knife -Thank you 🌲

[@fz-makingknives3663]

Thanks

[@lermos]

Шикарно как всегда

[@dustinbrosmer6164]

Your so talented the knives you make are amazing

[@Shadowband72]

Very knife as usual 👍👍

[@fz-makingknives3663]

Thanks 👍

[@lds630205]

你锻打出来的刀，真的逼格满满.大神。艺术品！