GCF530V - Replacing Your GE Garbage Disposal

Part GCF530V can be found at www.pcappliancerepair.com/inqu...
The garbage disposal connects to the waste pipe of a sink to grind up old food and waste.
In this video, Bill from Point & Click Appliance Repair will take you step by step through this replacement of a garbage disposal so you can learn how to replace the disposer (part number GCF530V) yourself.
WARNING: Before starting any appliance repair, always make sure that the appliance is completely disconnected from its power source by unplugging it. This tutorial is meant to be a guide and should not be used in place of installation instructions provided by the manufacturer.
For this repair you are going to need:
-Phillip's head screwdriver
-Flathead screwdriver
-putty knife
-ratchet with a 9mm socket
-hammer
-wire nuts
-serrated knife or hacksaw
-plumber's putty
Visit www.pcappliancerepair.com/inde... to find your garbage disposal.
Get disposal replacement repair help at www.pcappliancerepair.com/Repa...
Make sure to connect with us!
/ pcapplrepair
/ pointclickappliancerepair
/ pcapplrepair
/ pcappliancerepr
pcappliancerepair.wordpress.com/
plus.google.com/+PCApplianceR...
Subscribe to our e-mail newsletter for more appliance repair help, new product news, and more. Visit www.pcappliancerepair.com and enter your e-mail address in the subscribe box on the side.
Please give us a like, and subscribe to our channel!
If you have any questions, please feel free to leave a comment below!

[@katheeliberto4915]

I'm a retired female and with your help I installed my new disposable. Woohoo! Thank you!

[@BlackfootFerret]

Thanks Dude, this video saved my sink!

[@MichaelRAtwood]

Thanks it was a big help.

[@bloodbankhawaii]

How do you use an Alan wrench to rotate back and forth to dislodge something stopping the blades. Most disposals have this on the bottom. Where is it on these models? I have a 720

[@michaelbruno2914]

What about the ground wire? I believe it goes to green screw?

[@sandywjo5]

Are these basically same instructions for model GFC72V install?

[@AccentOnNature]

I’m doing this exact replacement. Can I use the old flange or are they not compatible?

[@chrisakersmusic]

Same question. The flange is not coming off the sink for me. The metal clamp seems to be a part of the base of it.

[@joecies]

lol I'm doing the opposite. GE sucks.