iPad 6 2018 Battery Replacement

[@ssk-ko7ml]

Thanks for ur video. I succeeded in replacing the battery.

[@DIYGeardo]

Great 👍

[@bertlzansinger]

Thx for the insights, but leaving the half ripped display seal inside is inappropriate..

[@DIYGeardo]

I didn’t understand what you mean?

[@psvialli]

Just done a replacement watching this HELPED me SOOO much so thank you !!!!

[@DIYGeardo]

You're welcome!

[@yatlonou-kb8zr]

Because the LCD screen and digitiser glass panel of the iPad 6th generation is not laminated, it’s not recommended to do DIY to replace the battery, there are big chances of getting tiny bits of dusts or fluffs inside the screen and made it look like dead pixels. … iPad Air 2 has laminated screens, that means the digitiser and the LCD screen are in one piece after taking the iPad apart, so unlike the iPad 6th generation as seen in this video. Over a year ago I kept it in mind not to buy repaired iPad 6th generation, but this year ended up buying one used, and the seller had replaced the screen, it has 4 tiny bits inside the screen!

[@budz9461]

@@yatlonou-kb8zr well it worked perfect for me and now my battery last all day and not just 10 min :)

[@Wendy-lq8uw]

@@budz9461where did you get the battery from ?

[@mgomez5606]

Can you use isopropyl alcohol?

[@mgomez5606]

Why is camera connector so difficult?

[@GodLovesUsSoMuch]

Appreciate the tutorial, thank you.

[@DIYGeardo]

Thanks for your Feedback..

[@HoroRH]

Please repeat the type/name of the final adhesive applied to reattach the screen, and where it can be ordered.

[@DIYGeardo]

There are two types. You can find pre-cut adhesive for 2018 model and if not b7000 / T8000 Glue

[@Duke373]

Thank you for the very informative video. How long is « sometime »?

[@DIYGeardo]

For the process, I would say about 1 hour

[@familyTran-wf2eu]

Thanks for the video. Definitely not a diy job.

[@DIYGeardo]

Thanks 🙏

[@louisbrucetatarsky9817]

Great video!! Thank you for the detailed explanation. Question: I charge my devices overnight. I’ll start using the iPad 6, at some point it acts as if the battery is dead and it will shutdown. I’ll try to restart, it will need the power cable (action like the battery is dead). Once it’s plugged in, it powers up and shows the battery 20% charged or more. It’s been acting like this for a few months. Any thoughts?

[@NullSignifier]

The battery is dead. The iPad approximates the battery’s charge from the voltage it’s outputting but when a battery gets old the voltage output will get lower and if it progresses beyond a certain threshold the iPad will shut down even though it still is partially charged the voltage output is just too low. That’s how I understand it.

[@dungva1505]

Hi. While in replacing battery, I did break a part on bottom ipad. I see that is 2 part the same, I tried start up ipad, it still working but I feel the wifi speed is slower. Do you know what the part I did break ?

[@DIYGeardo]

Please send me the video timestamp, i will let you know which part you need

[@bunnysrecapreview8887]

Bro I wanna knw bettry type or model number for ipad 6th gen

[@DIYGeardo]

The model number is a1954,a1893.. it is same as the iPad Air battery

[@Pebbles64361]

If using a hairdryer how long should I heat my iPad for?

[@DIYGeardo]

Start with about 2 minutes all around edges.. and then keep continue until you can create a gap.. after 2-3 initial step, then you can go with 1 minute at a time..

[@MikeyCarter-o2d]

i dont have a heating pad

[@DIYGeardo]

Hair dryer will do

[@FutureHealth119]

Thank you

[@DIYGeardo]

You're welcome

[@Moksh_jeevan]

Few months back my apps were crashed in iPad 6th..then i thought to reboot it, i switched it off but it won't turn on then.. my ipad is still dead .. cause where I live here's no apple service centre located...

[@DIYGeardo]

Well there are local repair shops that can help you. Your location?

[@goddavid5162]

My ipad 6th gen 2018 battery is dead. I can’t find A1893 model battery…can u please tell me which model battery i can install in it????

[@DIYGeardo]

iPad 6 (2018) battery is same as 5 (2017) and air..it is kind of common battery for iPads. Also it is the same battery for ipad 7,8 too (10.2 models)

[@goddavid5162]

@@DIYGeardo ipad air all models battery can fit in ipad 6th gen??

[@DIYGeardo]

@@goddavid5162 no, only iPad Air 1, iPad Air 2,3 &4 are different. iPad Air , 2017,2018, iPad 7,8 are same

[@levizinbr8533]

@@goddavid5162What happened sir? Find a battery with the recommendations?

[@jordanallan4805]

Is e6000 glue suitable to glue the screen

[@DIYGeardo]

Too strong

[@hecht2026]

But how did you get a gap that big that you can put somthing in i cant get any gab

[@DIYGeardo]

You need to Apply little heat and create a Gap, The initial process may take sometime, Need patience

[@hecht2026]

@@DIYGeardo thanks I got it

[@Smolciu3]

Where could i buy new battery and replacement kit?

[@DIYGeardo]

Your location?

[@Smolciu3]

@@DIYGeardo europe poland

[@DIYGeardo]

it is hard for us to ship due to new aviation rules. You need to check locally.Sorry, you can try Germany, there are many online shops, but again check how they send.There are limitations

[@huangda2161]

to bent board like that , is safe?

[@DIYGeardo]

i mean do not put too much force into it..The board is strong, but doesn't mean it is strong enough..without removing the board, this the easiest way to take off the battery..

[@huangda2161]

@@DIYGeardo i try to follow your vedio to get my battary done, however found very strong glue under knee the board, cannot bent that much like in vedio, really worry about to damage the ipad

[@DIYGeardo]

@@huangda2161you use card pry tool to cut the adhesive, if not little more heating will do the job

[@senglee2330]

Before gluing the screen is it safe to turn it on first?

[@DIYGeardo]

Thanks for your feedback

[@Abhishek.2635]

Quite genius !! Iron nerves

[@DIYGeardo]

Thanks

[@Roombacare]

I'm sure you have had enough thank you's, but: thank you

[@DIYGeardo]

Always 🙏

[@fargogemini694]

What do you resell it with please ?

[@DIYGeardo]

Resell? Means the battery ?

[@fargogemini694]

Sorry. I meant reseal

[@DIYGeardo]

@@fargogemini694 Adhesive or b7000/t7000 glue..DO not ever use super glue

[@Retr000]

Very helpful!

[@DIYGeardo]

Glad it was helpful!

[@Zekatzxs]

very patient and caring woman

[@DIYGeardo]

👍

Very helpful

[@DIYGeardo]

Thanks

[@eli-y]

Great guide, thanks! But I am having trouble opening the iPad up. What's the best way to open it?

[@DIYGeardo]

Thanks. You need to heat the device to take off the screen. Do you have any heating unit?

[@eli-y]

@@DIYGeardo Thanks, for replying I only have a hair dryer, but after hours I got it open. But now comes the struggle of trying to remove the battery. I think I am going to use the hair dryer to heat the back and 100% isopropyl alcohol.

[@MC-ju6pt]

Where do you get the battery from , can you take it somewhere to replace the battery? Mine just stop coming on and I love this iPad don’t want to get a new one

[@ptheoxd2599]

How much is it to raplace?

[@DIYGeardo]

Well it depends on the place

[@milandevries7306]

is it easy to do yourself

[@DIYGeardo]

Depend on how you rate your self and patience.It is not easy

[@アルファS660]

6:18ココガテンノウザンヤワナ

[@DIYGeardo]

Thanks for your feedback

[@mayed5593]

from where you buy the battery?

[@advaitshinde7008]

Amazon

[@Pinkielover]

Not the manufactures battery..... it's a third-party battery..Only way to get a manufactures batteries get it fixed buy apple themselves...$99 is fairly cheap to get it repaired

[@yatlonou-kb8zr]

Because the LCD screen and digitiser glass panel of the iPad 6th generation is not laminated, it’s not recommended to do DIY to replace the battery, there are big chances of getting tiny bits of dusts or fluffs inside the screen and made it look like dead pixels. … iPad Air 2 has laminated screens, that means the digitiser and the LCD screen are in one piece after taking the iPad apart, so unlike the iPad 6th generation as seen in this video. Over a year ago I kept it in mind not to buy repaired iPad 6th generation, but this year ended up buying one used, and the seller had replaced the screen, it has 4 tiny bits inside the screen!

[@mgomez5606]

Guaranteed to mess something up.

[@LordTested]

Am actually scared that the person who repairing my ipad said the screen is broken because he had to remove the screen to fix the battery and charged me 100 dollars

[@DIYGeardo]

Well yes, to repair ipads , they need to remove the screen..Sometimes there is a chance of breaking the LCD..It depend on the Tech and sometimes even Pros will have issues.

[@MrBarrynicholas]

some close up shots would have been helpful, instead of your hands blocking the view.

[@DIYGeardo]

Thanks for your feedback.. will try to improve 🙏

[@richardszmeiter6469]

Too hard

[@DIYGeardo]

yeah kind of

[@EdwardWorld]

u r killing me u should have mention about keeping ur original home button, now my touch id does not work, apple feature you use a new home button you will get the touch id problem and it will never work again if u use generic home button one of apple security feature i threw my old cracked screen with my original home button, this is was the only video i watrched, did not mention about keeping ur old home button zzz now my ipad is worthless

[@DrTune]

this is not a screen replacement video, so it didn't talk about that. sorry you learned about the home button the hard way

[@Wetnoodlegames]

Should never have folded the digi over like that. Also you made this repair ten times harder than it needed to be. There was no reason to remove and unhook everything around the battery. Thumbs down.

[@DIYGeardo]

not sure exactly what you mean, but needs to lift the board to remove the battery ? isn't it, any suggestions are welcome ?

[@joeylee3756]

@@DIYGeardo You do have to lift the board but it's easier to loosen from around the battery connector, this will allow access to the connector without unscrewing any other component. Most of the motherboard is glued down and is pretty flexible if you go carefully.

[@Justin-ro8nf]

@@joeylee3756 i Definitely agree! i just think its so Unnecessary to unplug all that extra stuff above the ipad. You can easily bend the board up and slip the ipad battery contacts to the teeth.

[@martyrrt]

Dude. If your accent wasn’t so thick and unclear I would have watched the whole video.

[@DIYGeardo]

Well Sorry, But, Different people, different voices, and also comes with a cost which is not easy to handle for more advanced way. Please use the CC or Timestamps

[@barlasbey8869]

Fake dissambley

[@DIYGeardo]

Any suggestions ?