Glock 20C 10mm Pistol Review (HD)

I do some shooting with the Glock 20C and discuss some of the internet rumors surrounding the gun (spring issues, flash blinding the shooter, ect....) and discuss some pros and cons of the platform.
mrgunsngear

[@serpents-n-shooters4686]

Truly the best big caliber gun Glock ever made…20C. The VERY hard to find Compensated model (20C) is the HIGHLY, HIGHLY sought after. Cool video!

[@Mrgunsngear]

I do. I did a 90-Two review a while back that's in my video history. I have others too though; just haven't gotten around to them yet...

[@Reverie100]

one cool thing about your videos is that you are always chuckling and seem to be having a great time making them.

[@Mrgunsngear]

Yes. They're similar in power (when loaded properly).

[@Mrgunsngear]

20-22lb spring for that. I mainly use my 20lb spring since I run both "FBI light" and full house loads at the same range session and don't want to have to change springs between mags. The 22lb seems to have more consistent ejection with the full house loads however.

[@jimmycannon-w6g]

Can you do a 2024 remake video of all your Glock C Models

[@Mrgunsngear]

Sure. Great choice if you feel you can control the recoil impulse enough to get back on target fast. With handguns getting multiple rounds on target matters as all handgun rounds are poor manstoppers regardless of caliber.

[@oneeyedpatriot]

Awesome review. It is just a matter of time before I take the 10mm plunge!

[@Mrgunsngear]

Thanks.

[@Mrgunsngear]

Awesome. I'm glad you found the channel.

[@Mrgunsngear]

Thank you---I dig the holster too...

[@Mrgunsngear]

If you shoot full power loads then I agree with the higher weight spring. I'll give you more consistent velocity and more power over all. It could cost you in the reliability with weak loads.

[@Mrgunsngear]

Sure. But it certainly wouldn't be my first choice. A 44 Magnum would be my choice if I had to use a handgun. If I had to pick a semi-auto, I'd take this gun with a 6'' barrel and some heavy Underwood FMJ loads. That said----go for a rifle or shotgun with slugs if you have that option.

[@ryanfriley8199]

Mrgunsngear Channel would you rather this one or the Glock model 40

[@troyvoorhees]

Nice video. For backcountry hiking in the Colorado Rockies, I carry a Glock 29 with 4.6" KKM barrel with 20lb Lone Wolf spring and full-power loads. I've never had any failures with that setup.

[@Mrgunsngear]

Correct. The recoil spring.

[@Mrgunsngear]

Depends on your skill level. If you can handle the recoil and put multiple rounds on target quickly then yes. If not, a G17/34 may be a better option. For most people they are in my opinion.

[@Mrgunsngear]

I did chrono it but in an effort to keep it short I cut it out. With the 165gr Underwood Gold Dots it lost 47fps vs the Gen4 G20 (both with 17lb springs) over a 5 shot average.

[@OVERDRIVE4825]

I'd be curious to see you do a side-by-side 20/20C shooting/ spring comparison with full power ammunition

[@Mrgunsngear]

Tough call indeed.

[@Mrgunsngear]

In my opinion---it depends. If you're shooting in the dark without illuminating the threat then maybe. But, if you're not illuminating the critter/threat then how do you allign your sights? If it's bright enough to see the critter/threat without a light than I don't think it will be an issue.

[@Mrgunsngear]

Anytime. Good choice

[@86djtaylor]

Don't know if you have gotten a chance to chronograph the 20c and 20 to see the velocity differences between the 2. I have a 20C and I love it. I'm curious to know if there is a big difference in velocity between the 20 and 20c. I know the 20c would have a little bit reduced velocity because of it being compensated. Any thoughts? Great review. Gotta love the 10 mill Glock.

[@Mrgunsngear]

D.J. Taylor 3-5% velocity loss

[@86djtaylor]

Mrgunsngear Channel That's not much at all. I was thinking it would be more. Thanks for the info.

[@TheTAEclub]

Just load the ammo hotter

[@Mrgunsngear]

Reloading is certainly the cheapest way to go. The brass was coming down in price before the recent panic started....

[@Mrgunsngear]

For hunting I'd imagine a fiber optic set up is probably the way to go. Maybe Warren Tactical?

[@Mrgunsngear]

5.56 if I'm at home. 40S&W or 9mm if I cant' have a long gun.

[@Mrgunsngear]

No difference in my opinion with the double recoil spring and I have lots of Glocks in both Gen4 and Gen4. The spring life is longer though...

[@HaleYeahFishing]

Nice work on the video, lots of good info. I cant decide between the 20 and the 20C and this vid has me leaning to the 20C. Only problem is I plan to use it as a safety back up to keep critters in check when I am bow hunting and there is a good chance that if I ever need to shoot it will be in the dark or near dark conditions! I am concerned that after the first shot my eyes will take to long to re adjust? Is this a valid concern?

[@Mrgunsngear]

Maybe I'll set to it one of these days. Thanks for the idea.

[@Mazryonh]

You should look into getting the Mechtech Carbine Conversion unit for your Glock 20C. The carbine unit reduces the recoil greatly and with the right sights/optics turns your Glock 20 into an excellent hunting carbine with the right ammo. I'm surprised that such a pistol/carbine combo isn't used by more police agencies, since both could share the same magazines. One modern M1911 in 10mm is available from Rock Island Armory.

[@anthonyreddy2834]

My Bad, should have checked your review of the glock c, instead of wasting time searching other videos. Great video as usual!👊👊👊

[@Mrgunsngear]

165 or 155gr Underwood Gold Dots are good rounds for defense against humans in my opinion.

[@anthonyvargasjr1602]

Awesome review! What kind of spring do you recommend for the G20?

[@Mrgunsngear]

If it ever becomes not fun I just won't make them anymore.

[@williammicou5757]

I have the glock 20 gen 4 with the TLR-1 streamlight on it, where did you get the holster from? Thanks, in advance.

[@molnii48150]

Thanks for the great video! Could you recommend any 10mm home defense rounds you trust and use for your Glock 20? Thanks again!

[@Mrgunsngear]

I hope that's a good thing... What surprised you about this one?

[@Mrgunsngear]

Thank you.

[@tonysmith5465]

Outstanding video friend. Good clean language.. keep up the great work. Thanks a lot. SC Navy vet. I want a 20 or 40.

[@ogarzabello]

1) Where did you get that holster? 2) Is it safe to shoot the G20C from a retention position?

[@Mrgunsngear]

Beamer needs to step up this year.

[@Mrgunsngear]

You're welcome.

[@53shelton]

Great Vid. Im considering the 29 what spring was you talking about changing when you shoot hotter loads? The Guiderod Spring Assembly? Thanks.

[@Mrgunsngear]

Got it. Thanks.

[@Mrgunsngear]

A good bit, yes.

[@bradfordcole4017]

Your the reason I bought a G20 for hunting. Thanks brother.....

[@Mrgunsngear]

RKBA holsters. I did a review of them if you check my video history. If you want one like that you need to shoot them an email. I believe so (others may differ but I've shot my 19c from retention and never had an issue)

[@Lex41710]

I don't know about anyone else but i all most exclusively reload 10mm rather than buy ammo anymore. The underwood stuff has perked my interest here lately but to be honest with my Hornady Press i can get some rounds smokin pretty quick. Do appreciate the link though cause another source is never a bad thing. Man i live hearing that G20 rock the steel though, nothing outside of a magnum sounds like the 10mm going off.

[@KZero38]

Great video, I like the side-by-side caparison. I just got a G21sf not long ago, and an sf or Gen4 20 will be on my horizon soon, if the current madness subsides. Thanks!

[@hambone7777777]

Oh, I was hoping u were going to chrono it. I have to disagree about the same recoil, 'cause it can lose 100fps.& more with those ports.Essentially bringing it down to a .40s&w depending on ammo, but with noise and flash. Personally, I would just put a .40 barrel in a regular G20 and have all of the benies. I agree with the flash being a non-issue. I didn't see a change with the springs, or get why an increase is desired with the comp. Usually it's a weaker spring, but 17# is weak for the 10

[@jackwindinhair]

is the gen4 spring heavier (like the 20lb you try here)? which did you like better? thanks for the vid -

[@Alaskansnakecharmer]

I just got one and I love it. Now I just need to find a light for it...Thanks for the Vid.

[@Mrgunsngear]

Thanks for watching.

[@l3arrett82]

/watch?v=GjvZOCUNMTs start paying close attention around 13:40

[@Mrgunsngear]

They do wear them faster; no doubt about that but you'd have to put a lot of rounds through one to get it where it wouldn't work. Even if you did, Glock would replace it for free...

[@bad8531]

I love my Glock 20. It's the most accurate Glock I own. I just wish ammo was cheaper and that there were more full power loads available, not the watered down loads.

[@blackhatch46]

the only problem i have with 10mm (and 40 as well) is since they are high pressure rounds they wear the gun out faster. not a huge issue though, i still carry my G22 daily and put my life in its hands. i think the issue is negligible.

[@cosmolinefiend9853]

There’s a gen 3 20c at the shop near me right now. I’m bout to go grab it tomorrow I think. Yea. I got to.

[@Mrgunsngear]

I may just make that happen one of these days. I'll put it on my viewer request list...

[@Mrgunsngear]

Good good. I hear some crazy things on here sometimes.

[@Beaner1221]

Sweet 20c and sweet clear holster. Sweet video.

[@Mrgunsngear]

I hear you there. Damn $200 stamps...... Three of those is a Glock 20.

[@jackdareapaiam94]

Love it looking forward to purchasing 1

[@Mrgunsngear]

Tracking...

[@DavidMartin-jr8nd]

so if I bought this and hated the porting could I drop in a non ported standard G20 barrel?

[@Mrgunsngear]

yes

[@perikaveera4438]

I had a significant problem with my new Glock20 that I bought last year and it was the trigger. Each time I fired a round I felt a pinch under my trigger finger, somewhere between the trigger and trigger guard area. Then at a local gun show I bought a Lone Wolf 2 port extended barrel for $130 and it was certainly worth the money. No more trigger finger pinch, reduced recoil and better accuracy. I did try shoot from a friend's Glock20C one time and it did eliminate the trigger pinch. But the extended length of the Lone Wolf, that extra 1" makes a noticeable increase in the accuracy level. Before that though, I felt less anxious shooting my Desert Eagle 50AE than I did my Glock20. Also, I wish Glocks came with rubber grips like say, the Desert Eagle. Because the hard plastic after a few rounds starts to hurt the skin of the fingers on the front facing surface where they wrap around the grip. Any suggestions on how you can remedy that? I also recently purchased a DanWesson 1911 Valor V-bob and I paid through the roof ( $2500+ ) for it, but it is sweet! Tight, crisp, accurate, reliable- no feeding/cycling issues and I've put over 500 rounds so far, quite unlike many other 1911s including Kimbers where that is the #1 problem encountered. JACKSON, MISSISSIPPI.

[@molonlabe9785]

I work at a gun shop and know that those little rugged studs on parts of the Gen 3s are all over the Gen 4s. I would guess that the "pinch" would maybe be a burr on the inside bottom of the trigger guard?? Glock flaws such as that are extremely uncommon. I'm thinking about asking our order guy to to find me a G20 SF or C.

[@twstalder]

A couple more steel plates (properly tuned) and you could have played Jingle Bells. LOL Love you videos! Thanks and Happy Holidays!

[@Irv556]

So the c model is louder than the original 20?

[@Mrgunsngear]

Yes.

[@Mrgunsngear]

Sounds like a fun little package.

[@ocfmeech]

You should do an comparison video of the g20c g20sf g20gen4

[@molonlabe9785]

need suggestions! I've looked up the ballistics for 10mm. and was very impressed. I was wondering about recoil and this guy makes it looks so minute, it's probably more than what he allows! (which shows great technique!) debating whether I want the 20sf or 23 (.40 S&W) which would be a downgrade in firepower, not that .40 S&W is a bad caliber! I'm a thinner framed guy and would prefer it on my hip.

[@joshborton1708]

Just buy a slim frame (SF) model of the Glock 20, or get a Gen 4 with the interchangeable back straps if you are concerned about size. As for perceived recoil, the C models help and so does proper technique. Changing to a different spring can also help.

[@molonlabe9785]

Thanks for the advice, I ended up getting the 29 Glock's subcompact 10. I think I'll be using it as a wood gun and not a carry gun though. Probably the S&W Shield in a .40 for a carry gun. Any other suggestions for a slimmer carry gun?

[@joshborton1708]

That depends on what you need. Slim and carry tend to be more comfortable, but reduce your capacity. I have carried a Glock 19, but am considering a 43.

[@molonlabe9785]

Josh Borton the 43 is really nice but only has 6+1 of 9mm. It is also pretty thin so it might kick in the web of your thumb but find a buddy or a place where you can shoot one and find out for yourself, everyone is different and only you will be able to know what gun is best for you.

[@mity2]

So, I have noticed that your using RKBA kydex in several of your reviews, and Im interested in one for my M&P45 with TLR-1 combo, and went to check their website, and clear kydex nor M&P45 with TLR-1 is listed. Is that something custom ordered? If so, if you could let me know how it was ordered, how much, how long for custom order, and if its something comfortable using as CCW holster(other then a range holster), and so on. Thanks

[@Mrgunsngear]

mity2 Just email them for availability and tell them you saw it here. They know better than me.

[@vincehollaway]

Good Video. Very informative.

[@millster101]

I'am considering the 10mm gen 4. was wondering is there a noticeable difference in the gen3 and the gen 4 (with the double recoil spring). Reason i am thinking about the 10mm is its so easily converts to a 40 S&w and the 357 sig. and with a little more effort the 9mm,

[@anthonyreddy2834]

Or people that have normal size hands, if you shape and stipple the grip, if you have to have the "c" model👍🏻

[@timmy101able]

You do a lot of reviews and seems to own a lot of the "c" glock models.. Do you prefer them over the non compensated models?

[@Mrgunsngear]

Nirmeet R No. I like all Glocks though.

[@bmxxxxxxxx]

What is a compensated model?

[@KM_1983]

bmxxxxxxxx There are holes in the top of the barrel and frame to help keep the muzzle flip down.

[@minnesotanice369]

What holster is that

[@edwinzambrona6299]

I wanted to own one sir but unfortunately glock 20 is not yet available in the philippines.

[@trojan4ever298]

Thanks bae for the review

[@Mrgunsngear]

I've only busted one so far though; I'm working on more... Need some new guns ;)

[@bradfordcole4017]

I have a G20 as well. Please tell me what the best sights for hunting would be.

[@stefanodogg280]

I have the Witness Elite Match 10MM as well as the G20. I like both platforms but the Witness wins hands down for ergos and shootability, especially out of the box, apples to apples. Well over 800 rds through mine so far and not one burp, lots of that full house handloads and Underwood. Not interested in a compensated pistol, too many negatives for self defense

[@Mrgunsngear]

thanks for the report

[@stefanodogg280]

You're welcome, brother. Hang in there, we are in for real battles ahead

[@Mrgunsngear]

RKBA

[@rocker816]

Could you throw in an aftermarket barrel in these to basically negate the compensation so that you get the full 10mm power? (Basically asking if the springs are the same)

[@Mrgunsngear]

ryan f Yes

[@bradfordcole4017]

Dude your bad ass thanks for your answer. The same damn thing I thought. Thanks x 10

[@DALEK1998]

What caliber would you use for self defense.

[@Rocket2373]

What ammo do you recommend for a new be to Glock 20??

[@texasranger6362]

Is the size of the grip the same on Glock 29 as the Glock 20

[@j20042001]

Sweet video helps me understand glock20 wasn't a fan of 10mm but now I am lol

[@bdkbdk8005]

Does the Glock 20C kick any harder than a 1911? I usually shoot a 1911 with a 3.5 inch barrel.

[@Mrgunsngear]

Bobby Klimple With full power ammo--yes.

[@joshborton1708]

The weight of a 1911 eats a lot of recoil. Just like shooting a heavy wooden bolt gun, compared to a model with a synthetic stock.

[@blackhatch46]

yup. gotta love glock.

[@eg6v8killa]

Scootch brought me here nice vid I'm Subbed

[@DALEK1998]

is a compansated glock louder then a regular glock

[@mickeydown556]

I sold all 3 of my Glock 10mm to get a couple of suppressors and tax stamps. One day, I'll have one back. One day.....*kicks dirt*

[@benavrahamyitzchak8433]

What kind of holster you using

[@DALEK1998]

Would you use 357 sig for self desense

[@papaya1955]

123 Likes and 2 dislikes.... That tells me the " Yankee Marshal" watched your vid twice. I gave you a thumbs up !

[@Alexander-fz7sd]

How rare are these things?

[@silent69H1TL3R]

do you own any berettas?

[@prestonworden9811]

Nice TLR

[@kingk1813]

which do you prefer g21 or g20?

[@Mrgunsngear]

+King K depends on what I'm shooting at

[@sigmaglock7712]

I don't care for compensated barrels. I prefer to get the full velocity out of my ammo.

[@_cali187x_3]

its better then a 45acp and way more powerful and accurate

[@2realink279]

🔥🔥🔥