GM passlock 2 quick and easy bypass

[@heroknaderi]

Wow that’s awesome. Feels like going back to the good old days 😁😁

[@p0k7lm]

thanks dude , how do you know how much resistance do you need & what kind of car are you fixing there ? 😀👍🚙

[@michaelbarrett9906]

Cata strophic the key should have that little black button about Midway down the key with two metal tabs one on each side. that is just a resistor. Nothing more put your meter on those and once you feel like you have a good reading go to radio shack and buy a 1/4w resistor with a close value within about 100 ohms wire it in to the two white wires that come from your ignition switch and your good to go

[@JonPayneSrCML]

A 1998 Buick Century does not have a Passlock2 system, it has a VATS system, and yes, you can bypass them with a resistor that matches the value of the resistor pellet in your key. The passlock system uses a magnet and a Hall effect sensor and cannot be bypassed with a resistor.

[@puppetmasterblaster]

Prpblem with jootube is all this stupid misinformation and people waste their time on all these worthless videos. Plus this dude looks like a stoned dumbass.

[@TE5LA-GAMING]

No, that is true with Passlock 3 and newer but not Passlock 2. A resistor will work.

[@kcsid8626]

Do I still have to buy a new ignition switch

[@YT-User1013]

FYI, These systems only have 3 components, but those components together can cost you more than $1,000 at the dealer to replace. They are: Key (with Chip) - $80 to replace Lock Cylinder (with sensor) - $350 to replace Theft Deterrent or Body Control Module (TDM or BCM or by other names) - $700 to replace. This resister bypass only bypasses the key and the lock cylinder and not the TDM, so if this resister bypass doesn’t do the trick, it may be your TDM that’s faulty. Just an FYI.

[@angelmanuelcamacho8690]

that was the old mans idea huhh!!

[@thebronzeadhanas18]

I need to know what resistance. I don't have a chip key on my Oldsmobile Alero 2001 2.4. 2,200ohms I heard but I don't have a meeter and I got resistors and. I wish I knew all the resistances gm uses so I can fix mine and if this doesn't fix it I guess it's gotta be taken to gm cause I bought two bcms and tried the relearn but they done what my original bcm is doing and a solid security light stays on unless u crank it and go back to on position and it goes away but when off to on it comes back on. I don't understand wth to do anyone please help I'm in a really bad bind and time is against me n I gotta have this stupid gm product going. I always have problems outta Chevrolet n gm products cause there fkn cheap ass crooks who want us to come in to have this shit done that shouldn't be happening. Hell w them I'm gonna burn it down and enjoy watching it if I loose everything I been working so hard to get because of this stupid security system in my awesome driving Oldsmobile that's fuckin with my life!!!! Someone please help!!!

[@RobertoSantiagoRodriguez]

Wonder if plugging a 12v light bulb where you said to plug the resistor, would also work. Car stranded at grocery store and just trying to get her home Don't have access to a resistor but got quite a few bulbs. What do you think?

[@michaelbarrett9906]

Have to match the ohm range of the resistor in the key at cell they are all 1/4 watt resistors but the ohm range is anywhere from a few hundred to several thousand ohms so you need to make sure they have the correct value or within a couple of hundred homes of that value in order for it to work

[@vpalmer3703]

plug it in where

[@Sandhill1988]

That would piss me off so bad I'd want to burn it.

[@mikebarrett700]

That's pretty much how I felt lmfao 😆

[@chriscoron1407]

I need help for wife 09 enclave

[@mikebarrett700]

Sorry man, I don't know enough about the security systems on the 09s

[@shawnwhited794]

Dam u done all that work and didnt fix that jacked up head liner well right there is yr problems thats why ur ride didnt want to start because ur not giving her that extra TLC like it seen u do for the alarm system I'll betcha try an see lmao these cars are like that movie Christina remember that fr u would be amazed at just how much one will at haunted fr lol

[@luisrivera6871]

That’s a vats system

[@lspeeddemonl]

You need to know what resistor to use. 😂

[@mikebarrett700]

It depends on which key you have, it's just a quarter watt resistor and you have to ohm out the chip on the key with the two little metal tabs on each side

[@davejanovec3819]

It don't work for me WAZUUUUYP

[@samgunmagnus4583]

HOBO Genius … @¿@