Gold Kitchen Faucet using Rub n' Buff - for under $20! | Kitchen Makeover Pt 3

[@14yoohoo2007]

Any update as to how this held?! Gonna try it out soon if it’s recommended

[@rachelleblanc6955]

Thank you. Im going to do this to my faucets, door knobs and shower head. Great explanation. Beautiful. Good job.

[@Womanfromearth]

Pls leave a follow up video on how it is holding up, in fact about all the diy projects. Thanks!

[@TheHouseonOctoberDrive]

I will! It's only been a month and so far so good, but I think I'll wait a little longer before making another video

[@Womanfromearth]

The House on October Drive thank you, KZbin no longer gives an alert if anyone replies, seeing this only now :/

[@shannonericksen1291]

Never spray paint anything that gets handled often. It WILL come off. That being said, it’s instant gratification. Our Delta Trask champagne bronze broke the bank because we had to buy a beverage faucet for the bar area

[@lupelubb]

Yes follow up video please?

[@bellatronm5875]

THANK YOU! This is the best video on how to actually use Rub n buff. So many other videos literally just show people rubbing the product on handles etc. You actually took steps to show what we need, and you mentioned the most important key things which are that this stuff is NOT food safe and NOT waterproof, so sealing it and letting it cure is fundamental. I was going to buy this for my vanity handles in the bathroom, but watching your video really made me reconsider.

[@TheHouseonOctoberDrive]

You're welcome! Glad I could help

[@MrSwosh89]

If I may give my take as someone who did something similar, this is but a temporary fix, let me explain, this being a surface coating it is bound to flake away sooner rather than later, think of all the chemicals used in a kitchen, oils, food residue, water deposits etc... There is another way to create this effect and make it permanent, what most people do not realize is that most faucets are made of brass with a chrome layer on top (at least here in Italy), I have used sandpaper or alternatively a dremel to strip away the chrome and then I polished the brass, the result is a shining or dull golden faucet which will stay that way permanently provided a little care. If you want to go the extra ocd mile you could apply a layer of transparent, bake on, powdered polymer paint, to prevent the forming of patina and locking in the finish you like most. There are also chemical ways to strip chrome which I do not suggest at all due to the formation of noxious vapors and such. It is a VERY labour intensive process but the end result is amazing. Just my suggestion for the most insane diy-ers watching this video.

[@TheHouseonOctoberDrive]

Thanks for the tips!

[@MrSwosh89]

@@TheHouseonOctoberDrive You are most certainly welcome, but seriously if you want to do it take a peek at people doing restorations of old steel items and copy/paste their tools into your garage... I bought a Zorro lighter which is solid machined brass, it had been chromed and then had some nitrite gold finish, it is roughly zippo sized and it took me something like 5 hours to remove all the finish to expose the brass, I dare not imagine how long it would take to do an entire faucet by hand 🤣🤣🤣

[@Lina-yw9lh]

I love this! Thank you for sharing! How is it holding up? I'm wanting to use it on my kitchen faucet and some light fixtures but it scares me.

[@WisdomCalls]

Am interested in how this held up to daily use. I want to do this to my sink

[@TJ-669]

I did this to my drawer pulls. It held up for a few months but it wears off from daily use so I wouldn't recommend it

[@karalou88]

@@TJ-669 Even with sealing it?

[@TJ-669]

@@karalou88 I admit I did not seal it.

[@iammamak3]

Beautiful. Just the video I was looking for. Thank you! And cute cat 🐱

[@TheHouseonOctoberDrive]

You're welcome!

[@twimama43]

I came to your channel to see how you used the Rub & Buff and did not expect to see the twin to my own cat! They could be siblings by how much they look alike. Right down to their mane. LOL

[@TheHouseonOctoberDrive]

Haha so funny! Liam says hi :)

[@twimama43]

@@TheHouseonOctoberDrive Pudge says hi right back!

[@Jays81305girl]

Love, love, love! Please share how things are holding up.

[@TheHouseonOctoberDrive]

After 3 months, still looks great!

[@SuperHowyalikemenow]

Hi, Cam you Please do an update as to how this is lasting? It looks so great!!!

[@Sam-x5c5u]

Hi new to the channel. This looks great do you have an update on how this is holding up? Xx

[@trishcraft]

I used rub n buff on an altoids can. It didn't last long if that helps anyone. I plan on trying to sand a bit first then apply but it will either have to be touched up or sealed with something. Now on wood it lasts a long time

[@tonysopranosduck416]

Rub n Bud is not waterproof. And as it’s a wax, it’s basically sitting on top of a non porous surface and so needs to be sealed with a top coat of sealer. Sanding first definitely helps to add grip for the color on top to grab onto but if longevity is your goal, sanding as prep and then sealing with a quality top coat sealer would likely give you a sustained finish.

[@Yukymix1]

Beautiful beautiful home 😩🥰🙌🏻

[@TheHouseonOctoberDrive]

Thank you!! 😊

[@Yukymix1]

@@TheHouseonOctoberDrive your welcome

[@treejay01]

girl, this was everything!

[@TheHouseonOctoberDrive]

Thank you!!

[@DaphnesHomescape]

I love your cat, so cute.

[@pixiemermaid]

Plesse update: how well did the clear coat hold up over time. Did you re apply clear coat after so many months? Did it peel or chip anywhere ?

[@DaphnesHomescape]

My internet had been acting up but I just finished. I love how your faucet turned out. Tfs! Also I subscribed!

[@TheHouseonOctoberDrive]

Thanks and welcome!

[@albarohlf3007]

Gorgeous cat!

[@TheHouseonOctoberDrive]

Thank you! 😊

[@DesignOnADimeKwok]

Cats find the strangest places to walk and sit like kitchen counters 🙃 BTW this DIY turned out really nice 👌🏾

[@TheHouseonOctoberDrive]

Haha yes they do! Luckily mine only like the island so half the kitchen is still fur-free 😹Thanks for watching, glad you liked it!

[@BryanBuilt]

Looks great!

[@TheHouseonOctoberDrive]

Thanks!

[@mermer58]

Spar marine varnish would hold up the best.

[@my3sneezes]

I just tried using rub n buff for the first time on drawer handles. They were a brushed nickel finish and i wanted them to be a gold/brassy color . I looked online at samples of all the colors and chose gold leaf. It left a gold sheen but i feel like i can still see the nickel too much. Like it softened it with a slight gold but not anywhere near as drastic of a change that you demonstrate here. Im disappointed. Not sure what i should do. Should i just go a shade darker and try antique gold or European gold? TIA

[@robynarnett9651]

I'm having the same issue. Have you done anything differently or figured out how to get it to have a solid color? TIA❤️

[@hayleymiller1722]

What do you use to clean taps long term? Is the product durable?

[@minisinthehallshorts]

Thanks for the video. I noticed you didn't use primer. Will that affect how well it holds up?

[@TheHouseonOctoberDrive]

Thanks for watching! Rub n' Buff directions state it can be used on clean or painted surfaces. I'm not sure how a primer would affect the finish, but so far mine's still holding up 100%. I think if it's on a sink or near water, the sealer is more important because the Rub n Buff is not waterproof. If you use primer and get a better result let me know!

[@marycohen7153]

How is your sink holding up a year later?😊

[@Kona_Blue]

What type of countertop do you have?

[@Harlem143rd]

Hello! Can you find a updated video so we see how it held up?

[@mahjoureimane1270]

Darling thank you cam u give me All the link of the,stuff I need to us because I need to color min this week please 🙏 alo I need it abit lighter than you what the colour cald?

[@peggyt685]

Thank you. What is the exact colour of the rub n buff, is the polyurethane? Are they both matte?

[@SparklyOne-t9j]

How's it holding up?

[@lorenagonzalez8063]

How does this hold up to water and all? Does it last?

[@dtucker3218]

Looks like it’s been 11 months since you made this video. How is it holding up?

[@Journey_to_home]

Looks like there’s no updated video and no answer as to how it’s held up 🤷🏽‍♀️

[@deborahoakes9465]

Do you think buff and rub will cover stains on a brushed nickel faucet?

[@tymcnair549]

Does the paint wear off or chip after awhile?

[@ashleyguerrero9769]

Which color rub n buff did you use?

[@TheHouseonOctoberDrive]

Antique gold! amzn.to/3wV2sML

[@tiffanywoynilko8713]

Thx was wondering

[@susanschuler6714]

How long does the gold last on the faucet?

[@paulamcconville7295]

Howd it hold up?

[@neymaandrade6193]

Would you need to cover drawer handles of a desk after using rub n buff with polyurethane too?

[@TheHouseonOctoberDrive]

I probably would, just in case!

[@trishcraft]

Anyone know how this held up?

[@ginabradbury]

Hi there! New friend here and happy I found your channel. I’ve been thinking to do this to mine but have been hesitant. Turned out great! You think that can be used on the cupboard handles?

[@TheHouseonOctoberDrive]

Go for it!

[@kelzhomehairimprovements8109]

Do you have to put a top coat over the wax? What happens if this gets wet constantly ? I want to do my stainless steel sink and faucets

[@TheHouseonOctoberDrive]

Yes! Definitely top coat it, I recommend Varathane Triple Thick Polyurethane spray. Link is above!

[@TheHouseonOctoberDrive]

Hi everyone, sorry for the delay in getting the material links up but they're in the description now!

[@MisaDrums1]

I’m a drummer and I’ve been thinking about rubbing some of this on my hardware. You think it would look good? In my channel on my latest drum video you can see the hardware

[@Mech-Bruh]

I’m in a apartment so how can I change it when I leave?

[@TheHouseonOctoberDrive]

Unfortunately this is not reversible, not renter-friendly. Sorry!

[@Thesarahmaddaliteam]

I’m just curious how long this will last with wear? I was thinking of doing my handles as well but even with the polyurethane on rubb n buff not sure if it will last ?

[@TheHouseonOctoberDrive]

It's held up for a few months now!

[@Magnus-pm7ic]

There is no way this can hold up well. You will literally destroy the powder coat industry

[@khairunmiah8824]

Hi i just come across your video, I thinking of turning my bathroom tap into gold, your question was very help. Wanted as do I need to sand down my tap or does rub and buff work without?

[@TheHouseonOctoberDrive]

No sanding needed with rub n buff!

[@ashleyguerrero9769]

What’s the color of the rub n buff that you used?

[@TheHouseonOctoberDrive]

Antique gold! amzn.to/3wV2sML

[@kimberlywynn5776]

Where did you get the rub and buff at ?

[@TheHouseonOctoberDrive]

I got it at Michaels, but they also have it on Amazon and most craft stores!

[@kaycee6036]

Does it comes in black?

[@wendyhall24]

@@kaycee6036 It does! I ordered some from Amazon

[@iviebelle]

I’ve been trying to find something to use to stain the outside of my stainless steel refrigerator copper, this might be what I’m looking for…

[@TheHouseonOctoberDrive]

Definitely try a test spot first! Contact paper also works well on stainless appliances bc it has a smoother surface than your typical white refrigerator that has a bumpy texture

[@adelegossen7254]

Could you link the spray?

[@TheHouseonOctoberDrive]

Here ya go! Sorry, didn't realize it wasn't in the description! thd.co/3si2z1o

[@kerryberenato8277]

This did NOT work. I don’t even know how you accomplished it. All I can think of is yours is brushed and mine wasn’t. Made a mess, that’s about it.

[@stephineg.9047]

Lol 😂

[@homie-gtv322]

L.O.L.

[@ArtThouNotEntertained]

Nooooo! Looks bad, sorry.