GUI installed on all Technicolor Modem/Routers compatibile with (and probably not only):

This is a highly modified and universal version of the GUI installed on all Technicolor Modem/Routers compatibile with (and probably not only):
DGA4132 / VBNT-S
DGA4131 / VBNT-O
DGA4130 / VBNT-K
TG788vn v2 / VDNT-W
TG789vac v2 HP / VBNT-L
TG789vac v2 / VANT-6
TG789vac (v1) / VANT-D
TG789vac XTREAM 35B / VBNT-F
TG799vac / VANT-F
TG799vac XTREAM / VBNT-H
TG800vac / VANT-Y
with many fixes and new features like:
Quick glance statistics page
DLNA Fully working
Visualise CPU load
Show VoIP Password directly on the GUI
Upgrade/Downgrade firmware from the GUI
Export and Save modem configuration from the GUI
Ability to select two channels for the update (DEV or Stable)
Eco settings for the CPU and LEDs
Easy set up for Bridge or Voice Mode
Ability to revert from brige/voice to normal without factory reset
Traffic monitoring with Interactive Charts
Fast Cache Options
DoS Protect Options
Improved Traffic Graph
Dosens of xDSL Stats
Ability to Select many compatable xDSL drivers
Ability to install LuCI GUI or sharing service like transmission
Spoofing of firmware version to bypass CWMP controls
Select many skins for the GUI, like the Fritz!Box one
Install extensions like: Telstra Basic GUI, LuCI, Transmission, Aria2
And many others...
You can help the development of this GUI by reporting issues or suggesting improvements.
All the infomation can be found here and on the ilpuntotecnico forum (www.ilpuntotec...) (To write on this forum you need to write in the presentation section after the first login).
Basic installation instructions for the latest Stable release:
First you need to get root acces to your Gateway
Some Topics to help you get root access:
DGA4130 TIM: www.ilpuntotec...
DGA4132 TIM: www.ilpuntotec...
789vac v2 TIM: www.ilpuntotec...
789vac v2 Tiscali: www.ilpuntotec...
799vac, 800vac and 797n v3 Any ISP: whirlpool.net....
General GUI Topic: www.ilpuntotec...
Then execute these commands (Active WAN/Internet connection required):
curl -k raw.githubuser... --output /tmp/GUI.tar.bz2
bzcat /tmp/GUI.tar.bz2 | tar -C / -xvf -
/etc/init.d/rootdevice force
You can find all of the autobuilt GUI versions at this link: github.com/Ans...
If you get an error during the download process or you have no Internet/WAN connection on the device, just manually download the GUI.tar.bz2 file and put in /tmp folder via SCP then execute the other (non curl) commands listed above.
If you find a bug, please report it using GitHub's Issue feature making sure you attach a photo and the log (Run: logread). If you upload config files, please remove your personal details including your public IP and MAC. In the future there will be a button/command in the GUI to generate a debug file.

[@Maxwear4]

Bonsoir, je viens du Brésil, j'ai un DGA-4130 et j'aimerais changer son interface graphique, pourriez-vous m'aider, je n'arrive pas à comprendre les procédures.

[@djo7831]

I need a help please for tg799vn v2.... Italia Télécom modem white one I want unlock it to make it usable out from italy and the interface don't let me configure my informations its by default 0/35 and I need put my number and 0/38 any help would be appreciated

[@harman1912]

bonjour si tu est de annaba je peut t'aider

[@djo7831]

@@harman1912 oui de Annaba mais je crois que j'ai courcercuiter le modem lol

[@djo7831]

@@harman1912 0775907243 j'ai le viber et WhatsApp sur ce numéro

[@ارضالطيبين-ث1غ]

اخي عندي راوتر من نفس الشركة جايبه معي من السويد عليه واجهة الشركة ومش عارف استفيد منه ممكن مساعده

[@ارضالطيبين-ث1غ]

انا سألتك بالعربي لانه شاهدت اول ڤيديو في القناة

[@ارضالطيبين-ث1غ]

السلام عليكم