Hatsan 95 Trigger Mod Redneck Style

[@lonestar730]

Okay follow up, his tutorial on the Hatsan 95 really works! I bought a set of M3 .5 16 mm screws from Home Depot SKU 212591. Replaced the trigger screw closest to the fore grip. Hair trigger! I back it out far enough to detect a wall. If you back out to far the barrel won't cock,if screwed in to far there is no wall (dangerous). This guy's videos are the best on this subject. Very simple and solves the annoying Hatsan trigger issues. Perfecto!

[@springpistonriflefeverlone9611]

Super nice 🙂👍

[@fedup7416]

Just did this to My new Mod95. Took all of 10 minutes and works like dream, BIG improvment to the trigger.

[@springpistonriflefeverlone9611]

@@fedup7416 I'm glad that it helped you! 🙂👍 Have an awesome weekend!🤠👍

[@shanepitzer4126]

Oh man, I pulled my 125 out of the stock one time to have a look at the trigger, gas piston setup, and the different linkages. Yeah, that trigger has a lot of floating pins and moving parts. I was very careful and put it back together right away.....grin. Great vid, thanks for sharing!

[@springpistonriflefeverlone9611]

Thank you Shane 😃👍. The Quattro Trigger looks like a headache, lol.

[@paultowns9880]

Im sure your 95 will end up a superb rifle Chuck. It will be interesting to see how things look inside the compression tube. Have a great weekend.

[@springpistonriflefeverlone9611]

Thank you Paul. You have a great weekend too 😃👍

[@RedCornOutdoors]

Simple mod that can make a big difference, nice job.

[@springpistonriflefeverlone9611]

Thank you 😃👍. I'm glad that I used that duct tape, otherwise it could have been a headache, lol.

[@WalnutandSteel]

I was look over the trigger mechanism on mine. Haven’t decided how I want to proceed with modding it. But this is a nice reversible option to try first.

[@springpistonriflefeverlone9611]

This was a easy first step to improving the trigger. I did a little shooting after I had changed the spring, and immediately the trigger was much lighter, but it had a tiny bit of creep. I just got off the phone from Ken at a Airguns and Pesting, and he said, he used a longer screw in the middle of the trigger which is the second stage break weight. He said by screwing that in further and adjusting the other screws, he got his trigger down to about a pound😃👍.

[@WalnutandSteel]

On mine the trigger isn’t too bad as far as creep. It is measuring right around 4lbs without me modifying anything. The second stage screw is all the way in on mine already though

[@springpistonriflefeverlone9611]

@@WalnutandSteel You would have to get a long screw. I wanted to make sure that mine would group decently before I did any sort of modification. Have you had yours out since the last time, when you were having bad accuracy problems? I really would like to get out shooting it again, but it's snowing outside right now and looks kind of crappy for the weekend.

[@WalnutandSteel]

I have not had a chance to shoot it anymore yet. probably not until tomorrow. I only have around 60-70 shots through it so far. so I hope to get another 100 or so through it before I make any determinations about returning it or not.

[@springpistonriflefeverlone9611]

@@WalnutandSteel I hope that it works out for you 🙂👍.

[@lonestar730]

Want to improve my Hatsan 95,thanks for the work

[@springpistonriflefeverlone9611]

You are welcome 🙂👍

[@hoobeydoobey1267]

Any insight on a 125 that cocks but doesn't fire?

[@springpistonriflefeverlone9611]

I haven't done anything with it. The biggest problem, it doesn't cock. I think that is why that guy sent it to me. It needs a new trigger group. The existing trigger block's pinhole's are too big.

[@springpistonriflefeverlone9611]

It could be a easy fix with a new trigger housing

[@jonathanlacy305]

Unfortunately, you are going to have to take it apart and reset your trigger. Sounds like a you screwed the adjustment screw in to much. Either way you are going to have to take it apart and reset the trigger

[@JohnSmith-mj6qx]

Is this the replacement for the one you sent back or just a late post? Also. Are the front stock screws going in reverse when they went back in? Looks like they tightening to the left. Thank you sir.

[@springpistonriflefeverlone9611]

Lol, the camera 🤳 that I'm using right now makes everything backwards. Everything is righty tighty, lefty loosey😃👍. Yes this is the replacement rifle. I had it out a few days ago and shot 9 out of 10 under a quarter at 20 yards in windy 🌬️ conditions. I was not going to make any modifications to the rifle until I knew that I could shoot a good group. I hope that helps you 😃👍.

[@JohnSmith-mj6qx]

@@springpistonriflefeverlone9611 Ah ok. Didn't know if it was some oddball bolt because it was multi piece. Might have to get me a 95. Only been eyeing them for 7 or 8 years now.

[@springpistonriflefeverlone9611]

@@JohnSmith-mj6qx The price is very affordable and if it doesn't shoot accurate or there is a problem send it back to where you got it from 😃👍.

[@springpistonriflefeverlone9611]

@@briancusworth Yes, the front screen camera 🤳 turns everything around 👍. I will try and use the other side, but I can't see if l'm in the video that way.

[@airgunspestingch.8426]

👋🏾sup brAh! Good video! Good idea using the duct tape braddah👊🏾😎

[@springpistonriflefeverlone9611]

Thank you Ken😃👍. I might need to call you tomorrow and ask a few questions about the screws in front of the trigger.

[@mguffan]

Good stuff as usual. Remove the heavy stinky and crisp it up.

[@springpistonriflefeverlone9611]

Thank you 😃👍

[@lostinwisconsin4802]

Are all the screws on a Hatsan left handed they are in the video, just asking.. ??

[@springpistonriflefeverlone9611]

I don't understand. Do you mean lefty loosely, righty tighty?

[@Relaxbadkneeadventures]

👍😉

[@springpistonriflefeverlone9611]

😃👍

[@MichaelMiller-dz8rk]

You just push out the pin behind the trigger? The block with the small allen screw on top with the little nib will pull from the back then theres space to be able to pull the spring to replace? It looks simple enough but still kinda unsure if i wanna attempt it

[@springpistonriflefeverlone9611]

That's totally right. 🙂👍

[@RonaldZipperer-g9c]

Where can I buy a quantum trigger

[@springpistonriflefeverlone9611]

I think you mean "Quattro Trigger". Hopefully Hatsan USA can help you 🙂👍.

[@jonathanlacy305]

The only internal parts hatsan USA will sale to the public is there gas ram,and springs

[@jonathanlacy305]

Things like triggers,barrals, And stocks is a no sale.

[@RonaldZipperer-g9c]

Where can I buy a quantum for a 125

[@springpistonriflefeverlone9611]

Try Hatsan USA🙂👍