500% Brighter Headlight Upgrade For The 2012 - 2015 Tacoma | Morimoto XB Hybrid LED Headlights

[@mrsmith8240]

Put these on my 2014 tacoma. Not only do the work great, they change the whole look!

[@HeadlightRevolution]

Heck yeah man!

[@Ianpayne83]

I installed these on my Tacoma. Overall I’d have to say I’m happy with them. Unfortunately you can’t use the switch back LED bulbs on these trucks they aren’t compatible you need to retain the OEM halogen bulb which will make your turn signal significantly less visible then the stock set up. Also just a heads up for anyone watching you can’t wire in the LED DTRL’s into the fuse box under the hood as demonstrated in the vid, if you do this they will periodically turn on and off for a few minutes throughout the day and night. To avoid this you need to tap into the fuse box inside the cabin unfortunately doing so will mean you can’t get the twilight setting to work properly.

[@lovelace4457]

When you say the switchbacks aren’t compatible, what do you mean? I installed these headlights and then the Morimoto switchbacks. They function, but now my truck is throwing a code? It didn’t have a code until I installed the switchbacks. Any help?

[@eclipse310]

I can think of 900 reasons why they shouldn't be on my truck...hehe. Joking aside these look so good and they allow the 2nd gen owners to play a little catch up with the current standard in new vehicle lighting. The OEM headlights have such low light output that the wife and I always joke about needing the cars next to us to really light up the road. Such a necessary but expensive upgrade.

[@HeadlightRevolution]

Absolutely worth it!

[@mishammer9698]

Thank u guys. I’ve been waiting on this video. Plus u guys should do tails 3rd break light too lolol.

[@HeadlightRevolution]

No problem!

[@trevorrogers2173]

I followed this install video and now my fog lights don’t work… have you seen this before / any recommendations?? Thanks so much!

[@azballerguy]

What if you have the full time DRL from the factory, will the turn signal bulbs be used as the drl, or will the led bar replace it and the turn signal bulb will only come on when signaling?

[@jacobhauenstein]

it doesn't change the behavior of the DRL's if you have them stock. Ideally you put switchback bulbs so that you have a matching led DRL, but you can just run the stock bulbs if you want

[@SierraYankee7]

I wish they made matching taillights.

[@HeadlightRevolution]

Maybe one day! Alpharex has some cool options for now.

[@joeydupont6565]

Those headlights are by far the best thing I bought for my Tacoma and they are by far the best headlights on the aftermarket for the taco and what’s even better is everything there saying isn’t BS Thank you 🙏

[@HeadlightRevolution]

Glad you like them!

[@uno3863]

Damn these look awesome, I'm torn between these and the alpharex for my '12...either one would be by far greater than the stocks I currently have, great vid 👍🏼👍🏼

[@HeadlightRevolution]

Morimoto FTW!

[@icouch]

If it's a single sealed unit then if one part fails I'll have to send the entire headlight in for repair. I'll stick to my traditional reflector housing

[@HeadlightRevolution]

We've thought about that, which is why we will send out a replacement before you even remove a faulted headlight! We won't make you go without

[@icouch]

@@HeadlightRevolution as per your website “The following products must be returned prior to replacement: Morimoto XB headlight housings, XB fog light housings, XB taillight housings, Banger Series LED Off-Road lights”

[@rodrigoruiz7878]

do you know if this headlight will work on a 07 tacoma? thanks

[@HeadlightRevolution]

You will have to do some modifications.

[@shawncarter5619]

I do have a DRL setting on my headlight switch. Do I need to install the aftermarket DRL set-up?

[@HeadlightRevolution]

You will still need to use the provided DRL Harness if you have OEM DRLs.

[@lovelace4457]

Just put these on my 2014 TRD Off-Road and they look great. However, the installation instructions in the video are inaccurate, at least on my model. I installed the DRL wiring harness in the engine fuse box like the video said to do. Very shortly after, the truck had difficulty starting. When it finally did start, the check engine and traction control lights came on and wouldn’t turn off. I checked the instructions on Morimoto’s website and they have the harness tapping into the cab fuse box. I did that and haven’t had any problems since. Stick with the manufacturer instructions. Good video talking about the lights themselves though.

[@sterlingd97]

Do the 15 Tacoma require CK LED? Attempted installing a pair of switchbacks and 1 way worked as running light but not turn signal and when flipped turn signal worked but not running light

[@BristolThePistol]

Damn this shits expensive yall got a discount code I could use. 😅

[@HeadlightRevolution]

We're having a 15% sale right now! www.headlightrevolution.com/4th-of-july-sale

[@dnlhitchcock]

Which number CK turn signal bulb should I buy for my 2013 Tacoma? I don't understand all the numbers. Thanks

[@HeadlightRevolution]

Shoot us an email! HR CS: 218-755-5200 [e-mail]

[@dnlhitchcock]

Oh wow just seeing this reply. Replaced then with those bulbs about 7-9 months ago. Thanks for the help. So I replaced them with those, but I'm randomly getting feedback radio interference when I use my turn signals. I get a static sound from my radio/ speakers when the blinkers are being used. What is going on, and how do I correct the issue? Thanks in advanced

[@exile28foo]

@@dnlhitchcock wait, which ones did you get? lol

[@KlassicKraze]

I wish they did this for those 6th gen Camaro headlight housings from Morimoto.

[@HeadlightRevolution]

Maybe one day!

[@austinstankowski3767]

What type of headlight would you get for a second gen Tacoma? (2009)

[@GoProHJE]

I have a 2010. It there an option for that year?

[@HeadlightRevolution]

Not a full assembly option at this time, we do have plug and play bulb upgrades though, reach out so we can help you! 218-755-5200 [e-mail]

[@Atalbot1994]

What kind of skid plate extension is that been searching everywhere to figure out what it is ?

[@HeadlightRevolution]

Sorry, this is a customer vehicle used for testing so we aren't sure!

[@Amathegoat]

Is there another option/model for the earlier years? (05'-11')

[@HeadlightRevolution]

Not at this time, sorry! We do have bulb replacements though! You can find these on our website!

[@tigersouthpaw1737]

I just installed these on my '12 Tacoma using this guide. They look amazing. I also purchased the GTR Lighting LED turn signal (CK) Carbide 3157s with switchback function. When plugging in the LED turn signal bulbs, make sure the slightly staggered metal contacts are aligned in the socket. You can easily trial and error this when you reconnect the power and function test the turn signals. If the bulb is flipped the wrong way, they won't turn on and your trucks dash will hyper click. Just pull them back out and flip 180 degrees.

[@icouch]

GTR LED's will overheat and hyper flash.

[@chaselord3986]

just got a set of these in today, hoping i dont have to remove or loosen my aftermarket c4 fab hybrid front bumper, thats a huge pain compared to the stock bumper

[@HeadlightRevolution]

How did it go?

[@chaselord3986]

So anybody running a c4 fabrications from bumper on a 2nd gen tacoma. You DO NOT need to loosen or remove the bumper at all to install these headlights, thankfully. However, there are two screws that attach a little plastic clip to the front of the truck, you can see these in the video, they hold on the little trim pieces under the headlights. We found that it's easier just to zip tie those back in place as that screw at the bottom of it was really hard to get out and nearly impossible to put back in. And these plastic clips clip in so they are very secure regardless. All in all the install was very simple and straight forward, anybody could do this. The only issue is just like others have mentioned, putting the "add a fuse" in the spot in this video will trigger your DRLs to randomly come on for a few minutes every few hours or so with the keys out of the truck as these trucks do an emissions check every few hours. In order to fix this you need to basically chop the add a fuse off the wire, run it through the fire wall, plug it into the small fuse panel above the emergency brake , there is a 15 Amp ignition powered fuse that you can replace with the add a fuse. Then everything works fine. I'm very pleased with the lights and they look great in the day or night. Would recommend but this video should be updated to atleast mention this fuse issue. This was my experience with a 2015 trd pro 2nd gen.

[@HeadlightRevolution]

Thanks for letting us know!

[@Carlos-ln1lx]

@@chaselord3986 dont the morimotos come with that fuse tap?

[@CrisF-o5v]

Can I put these on a 05-11 tacomas?????

[@HeadlightRevolution]

These are not compatible with 05-11 models.

[@smittysmith9053]

Can you share the link for the DRL led replacement bulb that is featured in this video? Thanks!

[@tanercomertoglu5236]

Where do I choose the DLR color?

[@tacolander_offroad7032]

On Xenon Depot.

[@HeadlightRevolution]

There are 2 separate listings, one for amber and one for white.

[@ChristianPerez-xd8zq]

Do they have this for a 2009???

[@HeadlightRevolution]

Alpharex has headlights available for 05-11: www.headlightrevolution.com/buyer-guide-by-vehicle/2009+Toyota+Tacoma

[@rwdmtb7556]

Please make a comparison of these and the alpha Rex nova

[@Carlos-ln1lx]

Awesome video and test! Picked up some white XBs a couple weeks ago, been looking to get led turn signals.

[@mattheineken]

My 2012 TRD sport uses the turn signals as DRL’s. How does that change this setup?

[@jongardner1]

yes, my 2013 has amber daytime running lights which are also the turn signals. he says in the video that the stock headlights did not come with daytime running lights.

[@mattheineken]

@@jongardner1 I ordered these. I’ll let you know how it works when I figure it out.

[@TheNazareth79]

@@mattheineken please update when you find out, my '15 TRD Sport also has amber DRM, but I think they are the ones on the inside, not the turn signals

[@mattheineken]

@@TheNazareth79 so they come with a fuse tap that goes into a slot you can see in the video. However I’ve noticed several times my DRLs will randomly turn on while the truck is off. It’s a dealbreaker. I might return them.

[@TheNazareth79]

@@mattheinekenwatch this video! It shows another fuse you tap into to stop that from happening kzbin.info/www/bejne/jqfIfat_gp6LrJY

[@twotablespoons8060]

I watched this video. Bought these headlights for my 2014 Tacoma and installed them. now my DRL randomly turns on while the car is off. Any fix for that?

[@HeadlightRevolution]

Reach out to our support team so we can help you out with this! [e-mail] 218-755-5200

[@louieserrano8952]

Hello 👋 just installed mine, and the drls flashed with no beep noise , then 22mins after that , the drls came on and stayed on till I inserted the key in the truck. Help please

[@HeadlightRevolution]

Reach out to our CS team so we can help you! 218-755-5200 [e-mail]

[@mattvielbig]

My 2015 has DRL built into the headlight switch which keeps the amber turn signals on. Would this mod keep those functional and add the LED surround DRL since those are wired into the 10amp fuse? Would the stock DRL function interfere with the surround LED function, in terms of full bright or dimmed?

[@HeadlightRevolution]

It wouldn't everything would still work as it originally did!

[@joshbecker1760]

I was wondering the same thing. At 3:06 HR states Tacoma doesn't have DRL, but my 2015 Taco TRD Pro has stock DRL. In such a case, does the XB Hybrid light up both the LED surround and the amber turn signals (stock DRL location) at the same time? Or does it distinguish between the two somehow and only uses the LED surrounds? Thanks!

[@BrendanMiranda]

@@joshbecker1760 I’m pretty sure the DRL switch just no longer does anything and the DRL’s just turn on with the ignition and can’t be turned off. I’ve seen a few guys on TacomaWorld that spliced a kill switch and routed it to a button on their button panel (next to the Fog Light/Trac Off Buttons) A bit annoying if you don’t want them on all the time but might not be a deal breaker for everyone. I prefer them on most of the time, but that makes it significantly harder to blend in somewhere at night to avoid annoying people without turning your truck off. Definitely going to try and wire up a kill switch when I install them.

[@Mikeyss11]

I just installed these today and was wondering the same thing when I tested them out. Honestly I wish I would’ve known that they’re always on no matter what and that my DRL essentially does nothing now

[@Wontonnoodle301]

@@joshbecker1760Yoo have you had your DRLs randomly turn on for 1-5 minutes while your car is off? I don’t know how to fix this

[@BambinoFilipino1]

Can you guys drop the link to the GTR LED?

[@HeadlightRevolution]

Check out the link in the description!

[@ParzivalHB]

Looks great! Way better looking than the stock headlights.

[@HeadlightRevolution]

Right!

[@markleblanc6974]

Nice lift on the Taco Is it 3”?

[@jeffreymcmillan551]

I can't find where the sites give the option of white or amber, any insight? Also, do any of these sites have a military discount?

[@HeadlightRevolution]

Reach out to our CS team!

[@RoolLsable]

I just installed this on my truck, is there horizontal adjustment? I only see vertical. My right lights are aiming too much to the center.

[@HeadlightRevolution]

The horizontal adjuster is located on the side of the light in the rear, the only way to reach it is most likely by removing the headlight entirely.

[@exile28foo]

I just saw they make these with a smoked housing. Does this affect the light these produce? Would imagine the smoking of the lens would reduce light but not sure and not much info on them rn. Thanks!

[@HeadlightRevolution]

The inside of the light is painted, no tint on the lenses. So no, it will not affect the light output! 🤙🏼

[@craigermorgon9909]

Do they create light scatter from the gloss housing?

[@dhensley0041]

I have a 2012 and the drl is built into the amber turn signal, but On my model the drl isn’t an option on the headlight switch to turn off, it’s just built in automatically. And on at all times with the truck on. Would the carbide series 2 still work with the drl function that the truck is built with in the turn signal.

[@HeadlightRevolution]

They should still work properly!

[@ajgrizzleybear]

Really liked the set up.....but for almost 1,000$ and the reviews.....its hard to commit.

[@HeadlightRevolution]

We've seen nothing but great things from these headlights and any issues we have seen were minor and covered by warranty!

[@ajgrizzleybear]

@@HeadlightRevolution appreciate the response. I've done alot more research and I have purchased!

[@chitogt7763]

Can you send me the link please

[@SrStew]

Can you swap in a new LED bulb in if one burns out down the road, or do I have to buy a whole new assembly? Warranty means nothing when your bulb goes out and you need a new one asap.

[@HeadlightRevolution]

These do not have bulbs, therefore you will need a new assembly.

[@rogermedrano3617]

Does this also fit on a regular cab 2012 Tacoma ?

[@HeadlightRevolution]

Yes.

[@ashfaqurmurad]

like 7:55, would you please elaborate about High Beam Pattern ?

[@HeadlightRevolution]

What would you like to know?

[@mattmcmaniac]

500% brighter? What about oncoming traffic?

[@HeadlightRevolution]

See that sharp cutoff? No light goes above that, aim them correctly and you won't be blinding anyone!

[@mattmcmaniac]

@@HeadlightRevolution The headlights turn on randomly when I use the circuit indicated in the video.

[@jorgeisaac9597]

Can i conecte the DRL to the signal cable ?

[@itzToro141]

What's the DRL I'm sorry but please let me know thanks!!

[@zackarywarn9444]

Are these tinted or jus black interior?

[@HeadlightRevolution]

Just the interior, we dont believe in tinting lenses here!

[@jorgepena842]

We’re can i get this head light and how much

[@HeadlightRevolution]

Here you are! www.headlightrevolution.com/white-xb-hybrid-led-headlights-12-15-tacoma

[@robertbarchan6976]

We’re can I buy these headlights

[@HeadlightRevolution]

Right here! www.headlightrevolution.com/white-xb-hybrid-led-headlights-12-15-tacoma

[@22_Vance_Limited]

How could I get switchbacks to work on my friends 2nd gen Tacoma, it’s a 2011 and when you put it in any other gear besides park it turns amber, how could I get the switchbacks to work properly.

[@HeadlightRevolution]

Maybe the bulbs themselves are the issue? Have you tried different sets or just the one set you're working with now?

[@22_Vance_Limited]

@@HeadlightRevolution just one set, the problem is that his turn siginal also acts as a DRL and I don’t know how to bypass that or remove that feature.

[@HeadlightRevolution]

Hmm, reach out to our CS team, we have a few Tacoma owners here. Maybe they could help! 218-755-5200 [e-mail]

[@22_Vance_Limited]

@@HeadlightRevolution got it, sent an email and I can send some pictures as well

[@22_Vance_Limited]

@@HeadlightRevolution unfortunately switchbacks just don’t work with his model, the one with DRLS it won’t work, I don’t know of any switchbacks that will work for it, it’s only a 2 wire wiring harness for his turn signals.

[@chadbrocker9268]

Do you have a link for the switchback LED turn signal bulbs? Thanks!

[@HeadlightRevolution]

Check them out here! www.headlightrevolution.com/3156-3157-gtr-lighting-carbide-bulbs-LED.BUL.3157.CAR2_2?quantity=1

[@brittmanor7295]

@@HeadlightRevolution Can you add this link in your description?

[@jsumzMK3A70]

got these headlights on my truck for about a month now and I made a On & Off switch that way I could have the DRL light to stay off when I wanted it to be. Note: my 2013 tacoma does come equip with a DRL switch on the turn-signal lever and it functions from: OFF - DRL - PARKING LIGHTS - HEADLIGHTS. I had to the option to tap the XB LED's to the factory DRL's but I wanted mines to be controlled separately so I added a rocker switch in between the XB LED DRL wire. I did not put the fuse-tap where the video suggested, instead I tapped it into the fuse box inside on the IGNITION 15A fuse (that way we know for sure it will go on when the key is turned to ON). hope this helps for those of you that want the DRL to be switched ON or OFF.

[@HeadlightRevolution]

Thank you for this info!

[@xxluciferxxr5]

I wish has for 2005 to 2011

[@HeadlightRevolution]

Maybe one day!

[@bob_frazier]

500%? Seems unfair to oncoming drivers. How about 1000%? 10,000%?

[@iceManSwag]

Lol

[@HeadlightRevolution]

Did you see the beam pattern? This won't blind other drivers.

[@bob_frazier]

@@HeadlightRevolution Yeah, cause guys who buy these always have them adjusted perfectly...lol.

[@Bayarea-ud6qo]

How long does it take these headlights to haze out

[@HeadlightRevolution]

These have a OEM grade UV coating. They will not haze up.

[@Bayarea-ud6qo]

Good to know, it gets pretty warm during summer in San Jose lately and I do not have garage shelter at the moment.

[@Sith_Lord_Hodor]

So, does the amber drl not work as a turn signal?

[@HeadlightRevolution]

Nope! The turn signal is a standard bulb turn signal in all XB Hybrid headlights.

[@Sith_Lord_Hodor]

@@HeadlightRevolution can’t turn off the DRL, and the DRL cannot be used as a turn signal. Worse $900 I have spent.

[@HeadlightRevolution]

You worded your question in a strange way and I didn't understand what you were asking sorry about that. For info on how to disable that bulb and only have it run as a turn signal reach out to our CS team! 218-755-5200 [e-mail]

[@sabesan7575]

Can’t wait to get these!

[@HeadlightRevolution]

Sweet!

[@fonhollohan2908]

I love my 2014 Tacoma I've had it for years and its a very reliable truck but I'm not spending a thousand bucks on my headlights to get a brighter head lamp, when I can just replace both headlamps with led bulbs with fans for a mere price of 100 bucks Canadian.

[@HeadlightRevolution]

That's exactly why we have different options! 😁

[@scottvaj4434]

Just get some black housing TRD Pro style headlights and some Lasfit LED bulbs for improved beam and brightness. I have this setup for almost 5 years now with zero issues. Get Morimoto XB's for the Fog Lights and you have a nice and cost effective setup!

[@anthonygiordano3991]

@@scottvaj4434 - Smart advice.👌🏼

[@kevinpt3]

Anything for 4th gen 4runner(06-09) in the works?

[@HeadlightRevolution]

Maybe one day!

[@mattheineken]

Having issues with the DRLs coming on randomly or staying on when the truck is off. Also the headlights are definitely not aimed from the factory. I’d expect better performance and QC at this price. Any solutions? I’m about ready to return them. Thanks.

[@HeadlightRevolution]

Shoot us an email at [e-mail] and we can assist you.

[@Alucardx72]

Looking for a fix too on the random turning on. In my case the aim was fine just a little adjustment in the driver side.

[@frankthedanktank]

I think this might be the fix: kzbin.info/www/bejne/jqfIfat_gp6LrJY

[@Xdtrl]

Enough people here with the same issue. This is where a company needs to go over and above.

[@jporras208]

@@Alucardx72 how do you like them so far? Are they actually very bright and overall are they worth the price

[@coreyt8276]

the amount of fake information here is mind blowing....Lying to customers to get them to buy your product is pretty shady. 500% brighter lol.

[@billmcarthur2012]

It's the same as 5x brighter. Not lying, just using different measurement terminology. Sheesh.

[@davidsauceda2618]

Lol

[@HeadlightRevolution]

Corey, did you pay attention? We aren't lying at all!