Hi-Tech stage 2, mildly moddified and tuned Crown vic Burnout

[@Turki.Alharthi]

It’s beast and the exhaust sound is very good 👍🏻

[@Faisal_17]

Yes, I agree with you, Abu Turki.

[@SilverBullet93GT]

i like the burnout instructions on the sun visor :)

[@JAMIE_ATKINS]

Lol

[@Nethter]

I want cams and a tune so bad but I don’t want my vic to be real loud I just want it to be a fun daily driver. What’s your 0-60 time? And btw idk why I clicked on your playlists but nice music taste, specifically aic lol. Rip Layne.

[@psyker4321]

I have a similar build. 0-60 is mid-high 6s with the stock TB and headers. Kept up with a 2021 mazda 3 turbo

[@mibd7812]

They got 4 cats just put a magna flow on. It will give a low growl when you gun it

[@lawofliberty3517]

Like it. Getting ideas for my 01.

[@1972mercurycougar]

Got to find that 03 Grand Marquis video; 351C Edelbrock aluminum heads, Holley sniper, h eaders duals, 3.50:1 9" Trac Lok C6.Beefier sway bars and links, No Panther should drive that well!! Talk about a drifting machine!

[@Sub4CarClips]

You ever think of getting a turbo? I think that’d be sick

[@JAMIE_ATKINS]

I would love to add the adtr vortech bolt on kit...

[@busce2576]

i literally need this sound for my crown vic lmao what exhaust are you using

[@JAMIE_ATKINS]

Obx (looks knock offs) long tubes with an obx 2.5 inch catless x pipe into magnaflow mufflers and 2.5 inch tailpipes out to the bumper

[@CobraR1993]

@@JAMIE_ATKINS explains why it sounds so different. Nearly 99.9 vics even with aftermarket exhaust are H piped but this is x.

[@1972mercurycougar]

I love this video too!! Currently have 2004 Town Car 3.27 rear better than my Mercury s 2.73:1 for sure. You got the 3.55:1??

[@JAMIE_ATKINS]

Chris, using a motive 4.30 gear set

[@yeanah2571]

@@JAMIE_ATKINS you're brave, that's a LOT of gear

[@OsakaBancho]

@@yeanah2571 Not for a car with overdrive it's not

[@yeanah2571]

@@OsakaBancho 4:30?? 65, even in overdrive has got to be pretty high. For a daily, that would be overkill

[@OsakaBancho]

@@yeanah2571 With the standard Crown Vic tire size the engine would turn 2500 at 65 mph and 3000 rpm at 80 mph. Perfectly acceptable for a street car.

[@jakefitzpatrick8550]

What vic is it with the floor shift

[@StockTurboN20]

An LX

[@DrSales-zl3kq]

Nice.

[@j.t.cooper2963]

Sweet. 👍🏻😎

[@beskiiugh7376]

You don’t mind telling me you’re wiring harness set up?

[@baird5776mullet]

Nice, do you have it locked in 1st gear?

[@JAMIE_ATKINS]

Ist is pretty short..lol. it's in drive. 1st into a bit of second in this clip

[@joe735]

12:1 afr aint a little fat for these? I was thinkin 12.7-13.0 would be the sweet spot

[@JAMIE_ATKINS]

The tune was tweeked after that. But doesn't matter now. Sold it last spring then the guy totaled it

[@joe735]

@@JAMIE_ATKINS damn man, that sucks.

[@DStabs720]

You have the best name on KZbin hahaha

[@JAMIE_ATKINS]

Lol thanks...wife's a comedian. Her idea.

[@tomorrowcomestoday1621]

What oil weight would you suggest for a mercury grand Marquis 1997 4.6l v8 that I just purchased, with 100k miles from an old guy.. He told me he used dino oil, 15w40, 20w50, etc all the time since he bought it.. The owners manual calls for 5w30. I was thinking 5w30 from super tech synthetic what do you think

[@tomorrowcomestoday1621]

Api sp specification 5w30

[@JAMIE_ATKINS]

I use whatever the manufacturer recommends. Especially an overhead cam configuration. Even if the engine isn't a variable timing type or uses oil pressure with actuators. If Ford insists that you use a 5w20 with this 2009 I figure there are good reasons. If nothing else, gets oil to the top of the overhead cams and timing components more efficiently tha. A heavier weight. Just because I do something a certain way doesn't make me an expert...

[@calimerc]

Whats your top speed with 4.30 gears ? I have 3.73’s with trickflow heads and stage 3 cams

[@JAMIE_ATKINS]

Not sure on that. Never had it out in the open to try. Cant afford a huge ticket either. So you've done what I've always wanted to with those heads a d cams...how in the hell do you get away with that in Cali???

[@calimerc]

@@JAMIE_ATKINS lets just say i know a guy hahaha fastest 0-60 ive gotten was 5.95 secs i still need to install some longtubes and nitrous

[@KyrieEleisonMaranatha]

So just a cam, tune, gears? Higher stall torque converter? Jmod? NA?

[@JAMIE_ATKINS]

yes N/A. Hi-tech stage 2 cams, Headers, 2.5 inch exhaust,underdrive pulleys, edelbrock vic jr. intake, twin 60mm throttlebody/ported Dragon oval plenum, 3800 stall, J-modded Valve body with a Sonnax sure cure kit, 4.30 rear gear, axel tubes trued and welded to diff housing, detroit trutrac, lowered, eibach front and rear sway bars, and dyno tuned

[@KyrieEleisonMaranatha]

@@JAMIE_ATKINS yes sir, murica. 💪🏼

[@KyrieEleisonMaranatha]

@@JAMIE_ATKINS i got an 05 town car with 98,000 miles, I jmod the trans and a year ago. I got cold air intake and marty tune. Obx headers and i just bought two turbos off a couple junkyard 2.3 liter engines. I'm about to run all that this weekend. Picked up two intercoolers from a lancer. Twin turbos this weekend for under $300 🤣🤣🤣

[@JAMIE_ATKINS]

also had a set of custom tubular rear control arms made. still using oem watts link.

[@Trapjumper]

@@JAMIE_ATKINS can that go in a 4.8?

[@markgoesbark7465]

What size tires did you have?

[@JAMIE_ATKINS]

315 35r 17 on the rear.

[@sadejacobs8966]

What's rearend gears are u running

[@JAMIE_ATKINS]

4.30 with one inch shorter tires than stock. Feels like a what a 4.56 would with stock height tires

[@j.arreola]

We’re did u get that center console?👍

[@JAMIE_ATKINS]

It was a local Craigslist deal. A guy was parting out an 05 Grand Marquis. I re carpeted and painted it to go with what I had

[@mgmnfld3109]

😳

[@rigoarredondo1986]

How can I get those cams?

[@JAMIE_ATKINS]

You can call hitech motorsports in Elk River MN. Comp came also has a similar grind/spec for a modular 2 valve

[@ChronicEye]

what mufflers?

[@JAMIE_ATKINS]

2.5 Inch Magnaflows

[@marcinzawada8966]

Numbers +/-?

[@sademitchell107]

What year Vic ?

[@JAMIE_ATKINS]

2009

[@krownvikkhris3004]

What all mods do you have?

[@JAMIE_ATKINS]

Hi-tech cams,victor jr. intake, twin 60mm throttle body, headers, 2.5 inch exhaust/magnaflow mufflers, 3800 circle D multi disc, 4.30 rear gear, detroit tru-trac limited slip, lowered, ebach sway bars etc.

[@krownvikkhris3004]

@@JAMIE_ATKINS ok sounds awesome and performs awesome as well, what are your shift points with your Cams? Did you do any work to the heads?

[@JAMIE_ATKINS]

@@krownvikkhris3004 didnt touch the heads. the engine is stock otherwise. Shift points are set at 6k.. rev limiter is set at 6400. Ive got a floor shift so I can manually shift and hit rev limiter if Im not careful

[@krownvikkhris3004]

@@JAMIE_ATKINS ok, good deal. 💪🏾

[@TerryByrdJr]

@@JAMIE_ATKINS you still running stock valve springs?

[@skrip2143]

Mods?!?

[@JAMIE_ATKINS]

-Hi-tech stage 2 cams -Edelbrock victor jr. intake -Moddified and ported Dragon Oval upper plenum -twin 60mm gt500 throttlebody -steeda underdrives -OBX stainless headers/2.5 inch X-pipe with magnaflows and tailpipes -Circle D pro 3 multi disc 9.75 incc 3800-4000 stall torque converter -Rebuilt and J-modded 4R75E/ valve body with a sonnax sure cure kit installed -axel tubes trued and welded to differential housing -detroit trutac differential/w a Motive 4.30 rear gear set -lowered front and rear -eibach front and rear sway bars -custom tubular steel rear control arms

[@skrip2143]

@@JAMIE_ATKINS wow nice build bro

[@JAMIE_ATKINS]

@@skrip2143 Nothing fancy or extreme but everything combined makes for a fun ride. around town or cruising, believe it or not. the chassis handles so good you'd be surprised. you can push it hard in corners. it's tight and stays super flat but just sticks to the pavement

[@JAMIE_ATKINS]

I forgot to add that I do have solid steel tubular rear control arms and poly bushings but am using the stock watts link

[@skrip2143]

@@JAMIE_ATKINS that’s a lot of gear tho I think I’m gonna go 4:10s since I’m gonna be daily driving and a good amount of highway cruising

[@manuelpadilla7629]

Is that all you got my quad does better burn those in that shit

[@JAMIE_ATKINS]

Lol yeah that's it tuff guy

[@Imtheman3]

Weak

[@JAMIE_ATKINS]

LOL, Yeah, it is. I will never argue that it isn't

[@manuelpadilla7629]

Is that all you got my quad does better burn those in that shit

[@JAMIE_ATKINS]

You should see how pathetic they are stock