Hikvision NVR Motion Detection Setup | Hikvision NVR event recording

Learn how to setup a Hikvision NVR to record by motion detection.
#bestsecuritydevices

[@user-np4ts1gq7r]

Why did you connect the camera directly to the router v.s. connecting it to the POE switch on the NVR?

[@ahmedal-rasbi7832]

Thanks alot for the good clip What is the difference between event and motion?

[@bestsecuritydevices]

Motion is the movement in front of the camera, event could be a video analytics.

[@juhanalmohed2599]

Hello my friend. I have hikvision nvr 7600 serie and a anpvpiz dome ipc360 not micro sd installed. Camera is connected to the switch to nvr.. I tested both ethernet cable with a ethernet tester ok. My camera detects motion in the day by a sound beep, but not triger motion do not record on my hard drive.. I went to camera settings enable motion. Disable save in usb and micro sd. ●in nvr hikvision camera setting even selected all day 24/7. ●in nvr hikvision recording setting, selected red for event all day 24/7.. Not triger HARD DISK RECORDING motion recorden when i WALK THROUGH. and continous recording act stragebly it records like in segment. In 8 hour just record like 2 hours

[@bestsecuritydevices]

Third party camera may not trigger the motion detection info to the NVR. Use just the video stream from the cameras and make the NVR do the motion detection analysis.