Porsche 996 reversing camera and apple car play installation

[@markcash2]

I live in the USA now. I moved here from SA in 1978. I am buying a Porsche (Boxter) and was looking into upgrades for it and ran across your channel. Your accent makes me homesick!

[@sibbese3740]

Top tip for accessing engine bay is instead remove the "carpet" behind the rear seats and most of the engine electrics and fuses are located to alu bracket. Its a completely "spongy" part so no risc of damage the car interior.

[@mrclown7469]

A good trick I've learnt is to tape the wire to a zip tie and use that to push/pull it through the grommet. Having something that's pointy, and rigid yet bendable, makes it a lot easier to poke through.

[@johnt.1288]

There’s one of the projects I wanted to tackle on my 997. Thanks Jeff.

[@Mrcaffinebean]

Little tip for you. You should be able to change the splash screen to be whatever you want. We installed the same head unit on my Dad’s 2001 Audi A6 and the factory logo on the splash screen made it look completely stock.

[@sstanford5484]

Sorry Jeff, this one was a little painful to watch. Owning a car stereo shop for 25+ years I can tell you for sure that a simple harness adapter would have cut you wiring time down to about 5 minutes, although that would have been a bit boring to watch. :)

[@HomeBuiltByJeff]

I couldn't get one when I needed it and the wiring was quick and easy, it was the stupid reversing camera that was the issue ;)

[@1one3_Racing]

Alternative to an adaptor plug, i used to use bootlace ferrules. Crimp them on to the Sony harness and they plug in ti the factory plug. If you dont have the correct tool, grind the very point off the cutting face off some side cutters and use those. Second, I could have figured out the wiring harness with a battery and test light faster than you could have googled it!

[@1one3_Racing]

I used to HATE going into a car that someone else had worked on and soldered behind the factory plug like this. Once you cut out the superfluous wiring you were left with sharp little stiff wires that would pierce insulation tape and short out!

[@Mrcaffinebean]

s stanford I agree however sometimes you just need to get a job and I’m sure you’ve seen much worse jobs. The previous owner of my Range Rover. Cut the factory plugs off entirely and taped and twisted al the wiring together. It was a total wreck.

[@1one3_Racing]

@@Mrcaffinebean best I ever saw was stripped wires held together with blu-tack. Not even twitched. I saw sticky tape used several times to hold bare wires and the amount of times I saw stereos grounded through to illumination wire. They couldn't work out why they were blowing fuses when they turned the lights on.

[@robhelenflaherty9083]

Looks good Jeff. I have a similar system (Sony XAV-AX1000) that I installed in my '04 Outback. Transforms the car with radio, my iTunes library and GPS from the Apple CarPlay. It makes the car look more modern too. I haven't got around to installing the reverse camera yet, too many internal panels :)

[@bruces12]

Apple Car Play in a head unit is a nice feature. I have one in my 370Z and love it.Great choice!!

[@Fred82ndAbn]

Who doesn't just love those eureka moments!? LOL Great video Jeff! Just about every 996 owner that has DIY fitted a double-din with a reverse camera has gone through that pain. LOL

[@OzGecko]

All of that poking things through tight holes felt like a sequence from Mighty Car Mods :)

[@HomeBuiltByJeff]

Haha. Thanks... I think ;)

[@smplyizzy]

I know this is an old video but at least in the US they sell simple black license plate frames with integrated cameras which makes retrofitting a camera very clean.

[@g19anson]

The car looks so much more modern inside! Looking good Jeff

[@doezel]

The existing power connector looks like a standard ISO connector. Coudn't you have used a convertor kit for that?

[@mentaldogmark]

My experience of reversing cameras means they split via a small connector less than 5mm wide which you use to feed through gromit's to need to fight an RCA connection

[@aramkassim4802]

You could have used a metal coat hanger by making a specific shape you need. Then tape the the wire and feed it through the grommet. Most audio shops in middle east use tgus method and it works everytime

[@neilb6029]

Silicone spray lubricant works wonders for getting wires through grommets. The Supercheap silicone spray also evaporates away reasonably quickly so you are not left with sticky residue that might attract dust. It is also good for lubricating plastic pop panels so they go in nicely. Also I think you have labelled your engine wiring with Dyno tape? I have found that dyno tape turns brown when in warm environments (though it could have been cheap stuff). When I did installation work, I used to write directly on the heat shrink, then just shrink it down. You could then use clear heatshrink over the top to protect it from fading.

[@gazzafloss]

Hi Jeff, I really like watching your facial expressions as you're working it's interesting, especially when you're dealing with something difficult. Never did like car radios, I had an E Type and a couple of other old Jags back in the 70's and 80's, loved the sound so much I removed the radios so they didn't interfere with the exhaust note.

[@RandomGenera7ed]

The Smoking Tire podcast, nice one Jeff!

[@marquisbois990]

I got that exact unit. Having a nightmare with Sony over it as it literally melted after 3 months. Better luck to you with it though Jeff - otherwise a handy unit.

[@tonyspiga2505]

incroyable tu est un vraix King bravo jeff

[@confused47]

It looks to me like the stereo switches off too quickly - like you've got the permanent and ignition switched wires the wrong way round...? That's caught me out a few times in the past!

[@HomeBuiltByJeff]

No, it is correct and retains memory.

[@1one3_Racing]

Coat hangar wire through the grommet from the inside, lots of insulation tape to connect the RCA to the coat hangar wire, pull it back through. If you can, pull the grommet out and cut an X in it, refit it and then pull the wire through. Also, get Mrs Jeff to do it. Women have small hands and can achieve great things working on auto electronics!

[@Pats-Shed]

You can buy reversing cameras that are built in to the number plate light , looks a lot better. Good job though, a lot of contorsionist manoeuvres needed to complete that job.

[@me61ic]

Maybe installing that microphone in one of the three blank buttons on the right of the stereo, drilling one of those blank black buttons, and hot glueing the microphone from the inside, would have been nicer, more OEM looking.

[@mclarenjohnf1]

10 Mtr Electricians fish tape about £3.50 is perfect for pulling cables through grommets and walls well worth the money also could you not get a harness converter I have used them for many cars as they are uk about £6.00 save your agro with the wires.

[@quemada100]

Hi there you two.... Great video as usual. Great, laid back explanation. 👍

[@simonevans9145]

you could have got a bespoke fit android double din touch screen, I've just fitted one to my Suzuki SX4 was a straight swop and plug and play

[@1one3_Racing]

If it was a cheap eBay unit, the Sony unit will blow it out of the water. Ive not seen a no-brand android unit yet that I've liked.

[@alanbuckingham8788]

Looks like the car its you well. I had a 996 and a 996 turbo and there just wasn't enough legroom (I'm only 6 feet 1 inch). The 997 rectifies this. But the 996 is ace!

[@alanbuckingham8788]

fits, not its!

[@Fingermunch]

Good to see that you did the most important upgrade for Mrs Jeff’s new car first 🤣

[@trapjohnson]

14:27 So many flavors of innuendo! Correction, 14:14 - 15:53 is like a rough draft of an MCM length innuendo segment! (Yes, I know they decide its time, set the camera, and just wing it; but, still!)

[@comfort_in_discomfort]

Check the text in the title. Apple vs Apply car play maybe?

[@HomeBuiltByJeff]

Ah, thanks

[@comfort_in_discomfort]

@@HomeBuiltByJeff No worries. The Alfa is one of all time favorites. I'm here for the long road to the finish. Cheers.

[@javieRDL88]

PCCM just came out for 996 and other models

[@toast6135]

Awww couldn't Mrs Jeff have given us some fun facts on Sony Stereos??!! 😁

[@tomahoks]

19:59 the most comportable position ever,LOL

[@medicusmd4978]

Hi Jeff, great video. The RCA video cable, where did you move it in the engine bay to the reversing camera? Doesn't it get too hot for the cable in the engine bay?

[@HomeBuiltByJeff]

I can't remember sorry, I sold the car a long time ago. The only issue heat will give you is if the cable touches the exhaust ;)

[@randominternetuser2888]

The PCCM+ system was actually easier than this and looks factory... because it is. It does not have back up functionality as far as I know but if you can't reverse your 996 you probably shouldn't be driving. Next is wireless charging from rennline and a wireless android auto solution.

[@professionalrookie8771]

Hows this for a hack Plasti dip . . . Well what do ya recon?😎 I'll explain eh. Start with a bit of history. Plasti dip started life as a "liquid plastic dip" for tools such as pliers etc that had lost or warn through their plastic covers on the handle. This not only brought grip back to the handle but acts as a electric insulator (as it is plastic . . .see where I'm going with this) so with those connections you cant get heat shrink to spray plasti dip into the lid of the can and use a brush and brush it on the exposed wire. Not only will it be water tight but it will be tidier than electrical tape and insulate the wire from shorting out.

[@PirataSports]

Four people prefer the Andrew Camarata stereo install method.

[@MyBlueZed]

The final result looks great. Relocating the climate control module looks weird (to me) but is a great solution. You even managed to omit the CD holder. 😀 Did I miss the reversing camera display demo? Where is the monitor located. Speaking of foam; those pesky bits of foam coming out of the air vents will be appearing FOREVER! 😫 What year model is the 996? Pre 2001 steering wheel and post 2001 tail lights. 😊

[@HomeBuiltByJeff]

Cars with double din units from the factory had the climate control there ;) .. and the monitor is the head unit?

[@danandyong6653]

They don't sell wiring adapters in the stereo section in Australia?

[@RicknWRX]

Another helpful video. Keep em coming!

[@elijahporter9080]

Awesome video! What is the model number of the head unit??

[@bozugarage]

Was just looking for a dash trim kit for my 996cab, but unfortunately your link says no (us) sellers ship to australia (im in melbourne). A few on ebay asking $160+!

[@Nixxomatic]

Shouldn't you leave the drain hole open? I know the wire would rub against the metal, but still, water has to go somewhere. PS: Why do you have the license plate covered with the transparent plastic?

[@HomeBuiltByJeff]

It is just a thing done by dealers

[@cruxinterfaces]

Awesome work, we will be at CES please check us out.

[@annas2327]

Hi Jeff - I can't find the surrounds for this unit on Amazon at all ?

[@HomeBuiltByJeff]

I bought them off ebay from memory

[@concernedcitizen5506]

Jeff what’s happened to the Ferrari engined car you were building?

[@silvermane9370]

You grandma! Reversing camera?!? Mind you I’m a good six inches taller than you so I can see out of the pram, so to speak. I refuse to use a phone while driving so hands free is not something I ever use even though it’s integrated on my car. I admit it I’m a caveman. Having said that you did a super neat job. Nice work!

[@seanmcgrath2202]

Did you think of using a pre-made loom from a company like Aerpro?

[@HomeBuiltByJeff]

They didn't have one for my car

[@liljedahldk]

Were you in a hurry when writing the title for this video Jeff? 😄

[@rumrunrjones8546]

where can i buy the surround pieces for my 01 996 TT like you have used so i can install similar stereo?

[@HomeBuiltByJeff]

ebay

[@andrewlangford88]

Nice apply car play xD

[@garydilbeck8882]

I had intentions of replacing the factory stereo in my 996. I left it alone.

[@vmoutsop]

Treat the wire like electrical cable and use a "wire fish" next time

[@truthseeker8483]

Since the drain hole under the tail light is now blocked..maybe you can drill another? Nice work otherwise :-)

[@HomeBuiltByJeff]

There is already 2 ;)

[@rotorshed4115]

Which model Sony is it Jeff?

[@HomeBuiltByJeff]

X@#%@ 3000

[@DerGestreifte]

So it turns out John Lemmon was in fact Lady Diana?!

[@roscoefilms]

No not Harry NAME IT CITRUS

[@1one3_Racing]

Confused about plugging your phone in. Can't you just play music through Bluetooth? All my cars do except the Evo X because it's an 08 and old school!

[@HomeBuiltByJeff]

Music can be bluetooth, but Carplay needs to be plugged in.

[@Mrcaffinebean]

Nathaniel Mathies Car Play requires the plug and basically makes the entire stereo display a big phone. Which is handy but I agree having to plug things in is a deal breaker for me.

[@Apexjuha]

Porsche 911 is not a male. It’s got a lovely smile, sexy ass and it requires a bit skill to handle. It also gives pleasure like no other. It is a female car. If you dont believe me go ask Lightning McQueen if his gf is a boy. Now, if you are into males, you pick a Vette, Viper, Daytona or if you are happy with a smaller muscles and tool a 240Z with their long erected hoods, low voices and predictable easy direct handling. Call the beauties Harry and Archie and they sure will do what Jeremy Clarkson says - sit in the garage thinking many ways to kill you. Dont say you were not warned.