Eric at South Main Auto has a great video on using these on his channel. They are quite popular in the rust belt and marine industry and I've used them for a long time. As far as stainless steel goes, I've found it will work with some grades that are magnetic.
@lulubellers4 жыл бұрын
Someone should come up with a tool to remove Stewie Griffon.
@JosephWestra Жыл бұрын
Love that new device, very cool! What kind of plane is that you have behind you, is it yours? Do you have any videos of you flying? I like the picture of Little Man on it! Did you name him? Love your videos!
@FlydadTC4 жыл бұрын
I have an old school Weller soldering "gun". I fit it with a length of coat hangar with an appropriately-sized loop around the suspect nut. Pull the trigger and the heat goes to the nut. Please use judicially.
@andy.puempel4 жыл бұрын
Very Interesting Tool. I have never seen this before. Thanks, Jon.
@sebastiancardoso72644 жыл бұрын
Thats hot, and cool ;) Althougt i agree Is safer than an open flame there Is such a thing as flash point for flamable substances
@johnbacon25534 жыл бұрын
I was waiting to see if the nut came loose...
@steveb73104 жыл бұрын
He never got to the point of why not to use it on aircraft 🤯
@maxwellduncan61504 жыл бұрын
I expect the title was referring to the use of an open flame.
@felonebike98593 жыл бұрын
@@maxwellduncan6150 I second this.
@BixbyConsequence3 жыл бұрын
Maybe it screws with the compass?
@Boscovius Жыл бұрын
I think it was just a clever hook to get you suckers to watch the video. Lol.
@doesntmatter30684 жыл бұрын
So what the hell does this "tool" have to do with "not using this on an aircraft?" You must be getting a commission on the sales.
@gawebm4 жыл бұрын
I'm guessing the strong magnetic current could wreak havoc on many avionics. Your bashing of someone who does a tremendous amount for general aviation is uncalled for.
@novicereloader4 жыл бұрын
Given what I've seen on the channel and of his sense of humor, he's probably thinking about the fact that most of the components on a plane are aluminum and will not heat efficiently.
@LTVoyager3 жыл бұрын
1:18 Don’t use a fire wrench on an airplane.
@doesntmatter30683 жыл бұрын
@@gawebm Insert eye roll here ....>>>>( )
@chadpm114 жыл бұрын
I have 3 different ones two homemade ones for very large objects thats are h20 cooled and one of the one in this video they come in very handy.
@MultiMcgruber4 жыл бұрын
What would you say the best route for someone working on barstock and steel rods might be? A prebuilt unit, or some sort of kit?
@nalakadisanayake5559 Жыл бұрын
Thank you sir
@ioanekirarahu9514 жыл бұрын
But can you pass your aviation medical with a pacemaker? I don't really know, but I doubt it.
@bethfarmer40404 жыл бұрын
From the AOPA site: Both heart valve replacement and permanent heart pacemaker insertion are “specifically disqualifying medical conditions.” This means that if you hold any class of medical certificate you should self-ground (FAR 61.53) until you obtain a special issuance (waiver); if you see your aviation medical examiner (AME), he or she cannot issue you a medical until you are “cleared” by the FAA's medical certification people.
@bethfarmer40404 жыл бұрын
Really enjoyed this!
@ThiagoG_4 жыл бұрын
So, where was this device made?
@BixbyConsequence3 жыл бұрын
Garden of Eden?
@mynameisntimportant93414 жыл бұрын
Why not use induction heat... oh wait that's literally what it is
@commentatron3 жыл бұрын
I'm thinking there's a connection here with the principal that keeps the Earth's core molten.
@ikay21024 жыл бұрын
Good to know. Thanks.
@gxlbiscuit4 жыл бұрын
Clickbaited
@kirbylee573 жыл бұрын
$262.37 ebay
@JMOUC2654 жыл бұрын
More, more!
@alammd.samsul84244 жыл бұрын
ria ekhon kikortese....boi pori chalona rekheye plane shartesen ...ria r book e matha rakhey r ghomoben na?....amd.