HOMEMADE 2" LIFT KIT! 100% from scrap metal, it drives perfect!

send me cool stuff. I do a feature video the middle of every month starting in January
sendit steve
P.O. BOX 99
Middletown, pa 17057-0099
www.roughcount...
genyhitch.com/
c4offroad.com/
all of my turbo needs have been a joined effort with Huron Speed
check them out for anything turbo related and for LS turbo kits
huronspeed.com/
sponsor of the corvette transmission and differential brace
www.eastcoasts...

[@dougcrawford6208]

Steve, don't be shocked but by no means am I a car guy ... well I learned from you today about the jack and using a socket to raise and lower it ( wait for it ) thank you and nice lift !

[@Chris-hw4mq]

Yeah me 2 first time i see somebody doo this

[@WilliamHollinger2019]

Yeah i will this method next time on impact and jack.

[@joemana4444]

Shocked....🤣

[@1nvisible1]

*Love the content. If the front strut supports start flexing during onramps, weld a triangle (corners snipped off) of plate in the middle of them to stabilize them.*

[@mcraige109]

Good video 📹 Steve. Different content that keeps my attention.🤔 I can appreciate your hustle.🛠🔩🧰💪 Stay safe bro. Peace!✌️

[@bradkerr1977]

I cant get enough of you realism Steve your the real deal. You do it, say it and send it like it is! Love the channel!!

[@MrWoodyBalto]

Common guys, I wanna see Steve Stanford do something Really Special. We just need 4,894 more likes.

[@RocksConcreteMinerals]

Yeah i see those strut towers blowing out fast with that lift

[@Beandiptheredneck]

The struts or the towers themselves? I’m curious why you’d think that

[@RocksConcreteMinerals]

Both

[@erectusmaximus5958]

Steve . While I'm pretty baked rn , did i just watch you fab your own Subie lift Kit 🤔 .. Hell Yeah Brother 🤣😂💪🏽

[@senditsteve8206]

Out of scrap metal and welded together with a harbor freight welder 💪🏻🇺🇸 haha 😂

[@FixItNick]

Forgot to put 2” in title, ... nothing line DIYing your own fab pars lol

[@senditsteve8206]

Thanks should be fixed

[@skullzrm]

Very cool budget fabrications, keeps the mind busy in positive ways, way to go!

[@boostedKTM]

What was up with that opening that was some terrible editing good video regardless

[@garyhowell738]

Steve doesn't claim to know everything about editing, he just sends it

[@boostedKTM]

@@garyhowell738 agreed and I watch all his videos but if he would have just proof watched it he would have realized that the end was at the beginning that's just sloppy

[@Beandiptheredneck]

boostedKTM by the time he’s spent a couple hours editing the video he probably let doesn’t want to spend another 18 minutes watching it start to finish

[@adamhogeland8033]

Preheat with a little propane torch to get the maximum amount of heat to penetration ratio

[@Beandiptheredneck]

I thought about doing that with my 120V welder, does it actually work?

[@TheMotorman80]

OntarioRedneXXX It does actually work. If you are welding thicker material, that’s when it really helps!

[@adamhogeland8033]

Yes

[@stevenblack2548]

Steve put the WENCH IN THE HATCH WITH A HOLE FOR THE CABLE. BUT US ROLLERS LIKE A SQUARE PLATED HOLE !!!!💪

[@jpmtek5896]

Good deal buddy. Have fun tomorrow. Looking forward to the next video.

[@wonderbread2764]

you should see if you can mount the winch in the trunk for the rear winch. So if your deep in mud your dont have to worry about trying to get it hooked up to the bumper

[@king_reaper1320]

Thanks for the Jack tip. I never knew that

[@alexandermaldonado3334]

Yeah no joke thats a great technique

[@mikepoint4983]

That’s cool Steve and on the cheap , now some stripes , snorkel and a light bar would be 🔥🔥🔥🔥🔥. Keep up the great work . Cheers

[@MYTOYMAKERZ]

Steve you have always been a hard worker and good explaining and showing how a back yard mechanic can do things. It don’t got to be pretty it’s just got to work. Your welder isn’t that bad and if your not welding everyday you don’t need a pro professional one. Keep up the content and keep the bucks rolling in so we have something to watch thanks

[@smoke9327]

Tnx u gave me a better idea than i had. 👏

[@jeffhall3242]

Awesome work Buddy

[@carl3766]

Send it Steve’s cloutbac

[@thatguy-ye7pb]

If those blocks are 2 inches your probably closer to a 3inch lift because of the suspension geometry it’s not the same as with lift blocks for leaf springs. But hey who can complain about and extra inch

[@BushcraftMo]

Great original content that has made me want to lift my old Nissan sunny as we have to go farm on Motorbike cos road is 2 rough gonna follow your lead Steve love the simple method big thumbs up and new sub from Thailand 👍🤘

[@mattr6344]

Sendit!

[@Beandiptheredneck]

Make a way to secure the winch in the back, of you roll that thing or get in a crash with it in there loose it could easily kill you or any other passenger

[@robertallen1662]

Halfway through the video watching the car teetering on that jack, Wow...just wow. Didnt you have a truck fall off the jackstands awhile back? Thought you would have learned your lesson then. Get a railroad tie and cut it into square blocks, that would probably be the most solid stable thing under the cars for that gravel driveway.

[@chevelle-pi1bn]

Is it me or did I not see you use any jackstands under the car ? I see you added eventually . For a minute . Looks good but work safe bud you got kids who love you.

[@BurntCashDesigns]

He had three stands

[@gregdowning4463]

Hey man what size tires you running on your subaru.... I'm doing the same thing to my 2011 outback but trying to figure out tire size

[@Dirty.Engines]

I bet you and. Ziptiesandbiasplies use the same welder

[@XSENTONEX]

Aha this is sick

[@ODST16]

I just found your channel and am seriously invested. I just have to ask, would you hesitate putting this lift solution on a daily driver? Obviously aftermarket lift kits are much more expensive than steel square/rect tubing and I’d love to minimize lift costs while also planning to add coilovers, upgrading sway bars, etc. I have a shop interested in helping out just to see the end result on my ‘09, so just curious if you would feel comfortable/if you would go this same route on a slightly more “valuable” starting vehicle. Love your stuff!

[@aaronpodgorski1617]

Cool man!

[@senditsteve8206]

Thank you definitely took some time haha well worth the end result though

[@jj629ful]

What size rims and tires?

[@jimhardy5349]

Very cool man , id like to take my jeep out wheeing with u guys bet it would be a blast..u know all the good spots around here..😀

[@patricktompkins5704]

Did you run Into any issues with your suspension geometry after this lift? I have heard that it can give you problems with your cv axles/joints

[@nuttwg6521]

It needs a roof rack and light bars

[@rayfp53]

for the rear hitch you should get a used hitch and weld it inside the trunk and it will double as a holder for winch while driving

[@frederickbarger1594]

Awsome...just imagine if u had a machine shop...the stuff u would come up with...awsome

[@mattbob6350]

When are we going to see a turbo on it? Better yet when are we going to see you launch it like you used to do to the Sierra??

[@senditsteve8206]

Haha no turbo but I’ll fly 😂

[@leoampie4942]

It sounds like it has a turbo on it already in some of the videos. Shouldn't be hard to source a WRX engine or Legacy GT and drop it in. The Legacy GT motor should be a straight swap and would make that thing a beast.

[@davidsanders4703]

I love it Steve one of my favorite channels hands down. Your a very crafty guy and I appreciate what you do!

[@bazilwreckerloughead]

The thing I really appreciate about this channel is that it's never the same thing 2 days in a row. Great job Steve!

[@chiego3874]

How was the CV Axles doing?? in 2 inch front lift.....

[@texthelegend8282]

Thank you, i plan on doing a prerunner style pontiac fiero

[@jmfiala1234]

I did this on my 2001 nissan sentra with a 3"

[@rokitman5753]

I have the same welder it works great with brandname wire

[@matthewprescott3009]

When he showed it in the parking lot who else noticed the rim in the front is bigger than the one in the back

[@senditsteve8206]

Same size wheels and tires on all 4 corners 🤔

[@jamesrichard448]

Steve you should build a ramp and jump the subie over the hill in your yard 😂

[@donovanmcgee4896]

Put a hood stack on that thing

[@senditsteve8206]

😂

[@warrenmichael918]

@@senditsteve8206 no hood stack but you better get that exhaust up so it dont get ripped off in the dirty stuff bud

[@evhexrc1765]

Lol there was a Subaru safety advertisement in the middle of the vid for me😂

[@arturorenteria518]

Can’t wait to see it In action!!!!

[@stevemaccollum4688]

Mount the winch right in the back of the subie. Then just pop the hatch and throw the cable to yer buddy who’s already standing in the mud. And I never get tired of hearing you say. “Let’s get some jack stands under it”. Which means let’s put a hydraulic jack under it and pump it right to the brink of falling over.

[@austinmitchell4511]

Why 2 different wheel colors

[@bringinghopesup6680]

Broooooo you just saved me a whole lot of trouble!!!! Thank you!!

[@senditsteve8206]

That’s what I like to hear

[@leoampie4942]

Btw Steve you should do some tool reviews too. I've noticed you use the living shit out of that Milwaukee impact wrench and battery ratchet. I'm thinking of picking up the second gen Fuel impact wrench and it'd be great to hear about someone that uses these things day in and day out. It'd give you content and also help someone looking for an opinion on then, what you like, don't like, would like to see. Doesn't have to be comparative to other tools of the same type, but an in real world type of use.

[@MattCSLnut]

Good job Steve 👍🏼😎 “Necessity is the Mother of invention” 👌🏼 Having all these odds & ends lying about the yard has finally paid off 😉👍🏼

[@user-ot9ti3ns2v]

Is this a video on winches?

[@ccpm8049]

Try out the new harbor freight welder. Titanium is the brand. Half the size and it welds a much better in my opinion in half the size and weight. Keep up the good content

[@anthonysourdiff1835]

What if you put your winch mount in the trunk then just open the hatch when you need it. It won't mess with your departure angle then.

[@marcmo7138]

welding a galvanized bolt. yellow smoke for sure. Don't breathe it in.

[@garyhowell738]

Steve just out there sending it with scrap metal and a Harbor Freight welder. I respect it.

[@braxtonweaver1434]

Your the best Steve

[@beardedamerican727]

Nice video Steve..... Ur kids at requesting u useing ur stands

[@etscrapping9923]

Pretty cool

[@mrbrian9633]

What up

[@nurselittleskills]

It's looking good, love the wheel color man.. strut spacers are not 1:1 lift to spacer height. A 2 inch strut spacer will give 3 or 4 inch's of lift. From camera it looks like the rear got about 4 inches of lift and the front got at least 2 but the car had a really steep rake before you started. I'm curious to see how that holds up wheeling. I bought a spacer lift for my tundra, lifted the front and it leveled out nicely so I didn't even put the rear lift on

[@nurselittleskills]

Enjoyed this video, it's like we're there handing you tools and not helping a single bit. I'm used to having people around like that

[@weriesblack1375]

I dont have the time or patience to do that ill just buy a proper bolt on kit 😅

[@clevonhicks103]

Great vid

[@goldengarage2622]

Can you fit 35s before buk bog? Lol

[@anthonypetruccelli2309]

Amazon sells a 40mm (1.575”) lift spacer for that Subaru $68, it could have saved you a ton of work to just have purchased a set. I respect the effort of building it yourself tho.

[@jameshennings8090]

But doing it himself saved him money

[@duramaxcountryboy2107]

Baby Bruce is looking great 👍

[@nuttwg6521]

You ought to turn the f450 into a tow truck

[@mattbob6350]

Send it Steve and the sketchy Subaru 😬🤣 I fucking love it!!!

[@senditsteve8206]

Function over looks 🤘🏼🇺🇸

[@elibearden2754]

👍

[@louiscombs3746]

Looks good Steve

[@senditsteve8206]

Thanks

[@jeffhall3242]

I want to buy it!!

[@darrenbutland2056]

Hillbilly ingenuity! Oh, yeah, you don't need 5000 likes, you've already done something real special.

[@IllegallyAcquiredKIA]

I would use steel tubes with big washers around the bolts it seems more strong than the square metal it might squish

[@senditsteve8206]

It’s pretty think metal. I will be keeping an eye on it though for sure. I promise to run this thing hard too

[@blindabinda1234]

That square stock isn't going to squish. Your talking like 300 lbs. On each block.

[@chrisweaver818]

Lol 😂👍👍👍

[@Zero_Mutt]

Now this is cool content

[@king_reaper1320]

I say paint the rims each birth stone color of your months

[@alighaus4127]

Great vid

[@joeydaugherty7974]

Do a old school vw gooseneck new tow rig😂😂😂