Honda CBR500 Fork Seal Change

Changing fork seals on my 2014 CBR500RA same as CB500F and CB500X

[@StinkzMehaff]

This made this job very possible. Thank you

[@Wildminecraftwolf]

What a legend. Thanks m8

[@nicholasr6381]

great video chris

[@chrisbiker919]

Thanks Mate

[@daelsdogs9815]

What size Allen wrench is the drain bolt?

[@Gabriel-wu1wt]

hi chris, got the same Bike and I got no Idea what the correct Torque values are for the forks. I can't find them in the manual. Where did you get your values from? Cheers from Germany

[@chrisbiker919]

I used to work in a Honda dealership 20 years ago and just remember for M6, M8 and M10 Bolts.

[@marlainadaniellesmithUCP]

At 10:44 when you dropped the washer onto the bushing, it take it the bushing was NOT seated. Thus it looks like when you were driving the seal down you were also driving the bushing and washer at the same time. Is that correct? My bushing is a tight fit right now. Someone said to put it in the freezer over night and another guy sanded the inside of his shock down just a bit. Thoughts?

[@chrisbiker919]

don't sand the bushing or inner fork. It should be tight. I am using the seal driver to knock the seal and bushing in at the same time.

[@XtianHC]

HOW MUCH OIL GOES IN EACH BARREL?

[@chrisbiker919]

503 ml

[@XtianHC]

@@chrisbiker919 5W OR 10W??

[@chrisbiker919]

@@XtianHC I used 10w

[@XtianHC]

@@chrisbiker919 VERY GRATEFUL FRIEND, SERIOUSLY THANK YOU VERY MUCH

[@louiebuilt_loya9538]

Next time don’t have a kid in the background.