honda civic eg d15b, de powered steering to EPS, honda civic electric power steering conversion

[@jhonsalinas2283]

How much for the kit to send to Melbourne Australian for honda civic eg5?

[@JomsF]

eps kit $300 to $350usd, shipping cost around $300 to $375usd taxes not included, still expensive

[@jdmlover7772]

does this will still remain auto center when you turning your steering?

[@JomsF]

auto center feature of the eps? i think it was disabled, since it is running on failsafe as per google search, so far i enjoy using it, i dont have a long test vid yet coz of super heavy traffic here in manila, but will definitely need to upload someday, will also upload the heat build up on motor and module so far it is very minimal, i can still touch em

[@jeffdelacruz8587]

Papano po ung rack end nyan?

[@JomsF]

@@jeffdelacruz8587 power steering rack end padin gamit ko, pero ginawa ko muna depowered search mo nalanv dame gumagawa nun, si michael flair dito sa YT meron din at refine movement

[@jms2861]

Bro where do u get the signal for the speed that goes to the module?

[@JomsF]

i think its running on fail safe mode as per google and other forums

[@jms2861]

@@JomsF thanks bro, planning to do this mod but my car doesn't have an ECU as it's got a carb.

[@JomsF]

@@jms2861 you dont need an ECU to run that bro, that convertion is only connected to acc or even ignition for the positive wire with fuse, then the other wire on negative, then another red wired direct to battery with fuse, my friend where i got this from also installed the eps on carb type old school engines

[@jonas_molino]

Will this work on a manual steering rack?

[@JomsF]

yes it will work, and it will be much smoother and easier

[@pacopakito4576]

kabayan san ang shop nyo?

[@JomsF]

bacoor cavite

[@MauryanEON]

How much does it cost?

[@JomsF]

about $300 to $350usd, only problem is the shipping cost much more expensive

[@justabutterflyyy90]

where can I buy this?

[@JomsF]

facebook.com/profile.php?id=100089180294447

[@JomsF]

you can dm edwin the custom builder for eps

[@iamnotyoursuperman]

boss mgkno

[@JomsF]

nasa 12 to 15k din bro, depende sa usapan niyo nung installer, kasi may steering column swap pa eh

[@zimmypoplin3505]

what eps is this? 08 suzuki?

[@JomsF]

not sure what year and model could be from carry van, but on the module it says mitsubishi

[@zimmypoplin3505]

can you send me a link to order

[@JomsF]

@@zimmypoplin3505 send me an email, [e-mail]

[@brylontoc6140]

hm po ang eps?

[@JomsF]

Budget ka 12k to 15k goods na yan

[@brylontoc6140]

​@@JomsF ganda boss, Change my hydraulic into electric. Less maintenance at lumuwag luwag yung part ng left side headligh sa engine bay. Mas malinis dn. 👍🏻👍🏻

[@JomsF]

@@brylontoc6140 yes lods, kaso sa mga purist or purista its a NO NO daw, diko pa ma test ng 80kph ++ or more, kasi lintek ang traffic dito sa amin, puro gapang dito eh, sa madaling araw naman madilim, sayang yung good friday nawala sa isip ko maluwang nun..haayyysss may mga gumawa nadin sa ibang bansa kaso magulo conversion nila, eto sa atin malinis at simple lang

[@brylontoc6140]

@@JomsF +1 ako boss, tama. Meron talaga ganun, gusto stock talaga. Tapos sa ibang bansa ganun nga, tama din, may mga pang yaris, volvo etc etc. at dito talaga sa atin simple lang at wala ng kung ano ano pang iibahin. Kung meron man, konti lang. Kaso boss naisip ko yung maintenance nya. 😅 Well sabagay depende pa din nga kung may budget kaso need na din palitan sa akin eh, 9k+ Rackend pinion (bnew thailand) + hoses (lahat since puro gato na sa akin at not sure kung magkano) + Power Steering Fluid + Labor + Wheel Alignment at kapag okay na, yung PSF need mo din monitor, (tagas etc, kung wala nmn, need mo naman palitan kapag madumi na - maintenance ulit) kanya kanya din nga boss pero sa akin 100% satisfied ako eh. hahahah. Though sabi nga medyo malambot daw kapag sa racing (though hindi pa naman ako into racing), recommend naman sa akin ay pwede naman lagyan sya ng switch sa accesories wire (base sa napagpakabitan ko) para pwede i-on or off depende nalang sa pag gagamitan. Pero tama ka boss, kapag walang galaw ang manubela, naka manual sya at walang voltage na nagagamit... Saka lang sya gagamit ng voltage at lalambot kapag nasense nya na ginalaw mo na ang manubela. 👍🏻👍🏻 Base sa experience: Manual engine on - matigas engine off - matigas pero hindi kasing tigas ng hydraulic kapag naka engine off Hydraulic engine on - malambot engine off - matigas since may pressure sa rackend pinion at hindi nagpupump ang PS pump tapos bumabalik pa yung manubela Electric engine on - malambot engine off - same ng sa manual engine off, masteer mo pa sya na parang naka manual ka. Kung may makakabasa sa comment base sa experience ko, CMIIW mga boss and base lang din sa exp ko. 😊👍🏻

[@JomsF]

@@brylontoc6140 kanino ka pala nag pa eps bro?

[@jerwinisolesario9900]

hm po

[@JomsF]

nasa 12k to 15k po dati, diko lang sure now

[@carlitotuazon5481]

San ako pwede mag email paps?

[@JomsF]

pm ka nalang sa jomsf sa fb

[@carlitotuazon5481]

@@JomsF di ko makita jomsf sa fb papi 😅 page ba yan or personal mo?

[@carlitotuazon5481]

@@JomsF nvm nakita ko na haha

[@JomsF]

@@carlitotuazon5481 page yun bro

[@rudolfrobles819]

Boss HM. Ikaw na din ba nag iinstall?

[@aladdinirving9439]

boss. nag message po ako sa inyo sa fb

[@JomsF]

Replied bro..