1500HP CUMMINS, THE STREET MONSTER IS DONE! Not sure about the color though…

[@bernhard8540]

I feel like ive painted my engines just about every color there is and i never saw this blue but i love it❤ i lmow this is an older video but i was going back and rewatvhing some videos because they are really good and fun to watch❤

[@jonathanjones8044]

As always-great content. As Ave would say, “engage the safety squints”. I have always been partial to Cummins red or beige.

[@shaunhuckabee5904]

I think the color looks good and it's a different look.

[@burtbrooks7731]

Where’s ur safety glasses at😂😂 as he squints “ right here’ 🤣🤣 that was awesome SAFETY THIRD👍👍

[@slowaf12v]

Josh in the safety crocs and glasses🤣 Great Engine Build cant wait for first fire!!

[@ProjectNotSoSlow]

Watching you torque the flex plate bolts with the milwaukee impact, raises my blood pressure. The color looks amazing!

[@horsetorquesdiesel]

It is not coming loose I promise

[@gailyoung9911]

THAT FLEX PLATE TORQUE WAS SPOT ON. IF YOU KNOW THEN YOU KNOW. IVE BUILT A COUPLE HUNDRED SUBARU BOXER ENGINES AND WHEN YOU KNOW THEM LIKE THAT THERE IS NO NEED FOR A TORQUE WRENCH ANYMORE. IT ONLY SLOWS ME DOWN.

[@stvnmllr]

I'm digging the teal! Looks good.

[@Balakay9435]

Ha that Safety squint everyone's been there before 🤙🏻

[@SIC_SIX_7]

I dig the teal. Looks sharp with the black and billet. We need some more 6 liter content! 😉

[@bdjm8595]

Lots of great bits of info here, thanks Josh and crew !!!

[@peterr7950]

The teal is sick, i'm going to have that bernie comment stuck in my head for the next week and snicker about it every time I think of it

[@sk8sloppy98]

flex plate install was top notch

[@colinlawrence2186]

Josh i have been following you from day one this is with out doubt your best and most informative video i can't thank you enough for taking the time to share this build with us ( 👍 the color is awesome ) As always God bless you and stay safe always 🙋‍♂️🇬🇧

[@horsetorquesdiesel]

Thank you!

[@justingarrison319]

I'm currently rebuilding my engine and I was going to go with the same color for the block 😆😆😆 I thought I was going to be unique lol looks great man and awesome build!

[@horsetorquesdiesel]

Get after it!

[@amoyer6807]

Big fan of the color!

[@73cjproject]

I like the color scheme. Really appreciate the super safety first camo crocs.

[@horsetorquesdiesel]

Safety third

[@73cjproject]

@@horsetorquesdiesel that Mike Rowe knows what he's talking about! Thanks for always providing great content. Love the effort and energy you put into it all!

[@jaythacker5160]

Great content and instruction as always buddy, I'm not so hot on the teal though. Thanks again for taking time to film this

[@baconcreek609]

"Votedforbernieliberalamountoflocktight" 😂

[@burtbrooks7731]

I like that teal👌👌

[@sidewaysstarion]

28:32 had me rolling, I almost shot coffee all over my keyboard.

[@mikestrucks]

What a nice engine! Great work Josh 💪🏻👍🏻

[@Foghorn117]

Love the color! It's different and bright

[@code10garage94]

Never knew Crocs made a work sandals…😆…Awesome vid bro, keep it coming!!…Aloha🤙🏽

[@horsetorquesdiesel]

Crocin

[@lyndonhamby7432]

Awesome setup brother. Love it 👍👊💪🏻✌️

[@agentmuzz]

I use RP 10w-40 HPS for my 6.7 (every day, not break-in). It is non-API rated so not constrained by emissions requirements and is fortified with zinc/phosphorus for lubricity and wear protections. Any newer API SL, SM, or SN rated oil as had almost all the zinc and phosphorus stripped out for emissions purposes. I do oil changes every 7-8K miles and send the oil off the Blackstone Labs for oil analysis. My rig is far from stock and it is used to tow 10-15K trailers along with being driven is a spirited manner. Analysis always comes back with no significant measurable wear and they always recommend I could go longer on the interval (I will stick to 7-8k miles).

[@horsetorquesdiesel]

None of the oils minus Rotella I listed off are safe on emissions systems, never been a fan of royal purple just thought it was snake oil, so good to learn!

[@jdunn1781]

damn nice work boys ! ya make it look so easy too . keep up the hard work ! allot of motivation off this one .. great entertainment and informational as well great tips n tricks !

[@6.7ram]

That 6.7 looks like my makita 18v drill and I like it lol

[@horsetorquesdiesel]

Makita is under rated in my opinion

[@408dodgeram]

Like watching all the builds. Keep them coming. I prefer amsoil in all my vehicles.

[@bigjoe3639]

Hell yeah sister! It looks sick!

[@ThePalmettoPirate]

Love the videos. Throwing a comment for the algorithm. Keep making the good content!

[@horsetorquesdiesel]

Thanks!

[@woos31]

Black and teal has always been one of my favorite paint combinations.............but where it's at for me in this episode is the steel toed shop crocs 🤣🤣🤣🤣🤣!!!! Or go-aheads as I call them cuz that's the direction you gotta head to keep the bead seated, otherwise you blow right out of em if you go-back..............in a nutshell, they're the ultimate built for racing hoof cover as everyone races in D........not R lmao!

[@horsetorquesdiesel]

I freaking love it lol

[@dansdiesel3576]

"the I voted for Bernie liberal amount on" had me laugh so hard. Great job Josh!

[@horsetorquesdiesel]

Thanks!

[@raymocandler]

The front cover looks sick.

[@SALTYDATTO]

Redloctite manual flywheels too? About to do my flywheel and clutch kit. Bought it from you all last week!

[@horsetorquesdiesel]

Yes 100%

[@jjthejetplane244]

Great video, im just curious how you guys fly cut pistons. I havent really seen any good videos on it. Would be cool to see you explain how to do it! Keep it up!

[@horsetorquesdiesel]

A bridge port mill

[@agentmuzz]

Why use the 5.9 intake plate over the 6.7? Wouldn't that limit airflow volume into the intake? Love the videos on the build.

[@horsetorquesdiesel]

The 5.9 plate has done over 2k hp twice now

[@martysmith159]

She's a beaut Clark!

[@ppump24valve53]

Teal= my gf favorite color.. so yeah!! I’m in love!! Looks fantastic!!

[@horsetorquesdiesel]

Ha thanks

[@mrnobody8540]

Love that color on my old 72 Ford pickup - the 70 was a 💙 - both had White as their other color.

[@bm9860sts]

Great video and awesome job on the motor. Love the colors. 🇺🇸👍👍👍👍😎

[@stephencauley4409]

That's a good lookin engine

[@Smokey72013]

Reminds me of the late 90s kawasaki 750 pwc engines. I like it alot.

[@ryanc8188]

The blue kind of reminds of the blue Greg a did on the 08 if I remember right. But might as well do something different.

[@chainesaw]

Love your show. I am restoring a 91 5.9 1ton any suggestions???

[@tiedbyblake]

"LIBERAL, LIKE I JUST VOTED FOR BERNIE!!!" BEST ILLUSTRATION OF HOW MUCH LOCKTITE TO PUT ON!!!

[@jesserasso1042]

Yup cause I'm gonna use your build video when I build my 6.0 and a 1/2 Cummins yea come on, I like that teal it's different it really stands out, a bro have a wonderful Thanksgiving

[@horsetorquesdiesel]

Good luck on the builds and happy thanksgiving to you!

[@billiondollardan]

Great video!

[@nickspedden1627]

Atleast now I don’t feel so douchey working on my shit in camo crocs lol

[@horsetorquesdiesel]

Crocin

[@lilredsled]

Looks good but id do that blue with an aluminum color accent

[@carlosmerino5547]

I love your well explain , l agree the torquing it’s very carefuly , l getting well on doing Dodge Diesel, the more we do the better it get , l hav to take my time , on Head torque bcs l am disable , have to use helper to torque the head bolts , l learned to prime the engine with oil wich it’s very important like you said , thanks for your post video ! God bless your bissnes your family , we keeping praying for lsrael ❤😢😮

[@TAC_Gray_Beard]

I been watching a lot of your build videos and I understand the reason for priming the motor. Where could someone find a oil priming tool or how we can make one? Love the content and all the information you are giving us.

[@horsetorquesdiesel]

ive been thinking about making them just not sure on demand

[@TAC_Gray_Beard]

@@horsetorquesdiesel I would love one for sure.

[@24vmatt]

i got the same pair of safety squints lol

[@beardedgaming1337]

for hte oil prime, did you guys just press out the crank gear, tap it for npt, and thead a gage in there? then weld a nut to the main gear?

[@gailyoung9911]

MY CUMMINS ENGINE IS NOT EVEN BROKEN AND THIS MAKES ME WANT TO BUILD IT ANYWAY. LOL

[@horsetorquesdiesel]

Do it!

[@compted10]

Have you ever tried the dual cp3 front case from companies like wagler?

[@horsetorquesdiesel]

No I haven’t but I’ve heard good things about waglers and d&j

[@compted10]

@@horsetorquesdiesel oh I had only seen wagler and Kenny's. I will have to check out d&j.

[@1g4u]

Dope 🔥🏁

[@mikeiler5539]

Slick looking engine! Nice Job!

[@joelkoehn266]

Love the color keep up the work

[@fc3sboy1]

I just drilled the stud holes in the factory stiffner.

[@horsetorquesdiesel]

There would be nothing left on a 14mm stud hole

[@justinschooler6243]

Looking good 👍

[@tiagopparaiba210]

hello friend what are the tightening measures for the ARP?

[@horsetorquesdiesel]

50-100-150 on the head studs

[@nicholaswolf3096]

Where did you pick up those safety Crocs? I'm looking to replace my safety sandals soon.

[@horsetorquesdiesel]

Amazon

[@ericmillier6652]

Had me rolling at ‘I voted for bernie, liberal amount’ of red locktite!

[@williamsmith286]

I might have missed it somewhere, but roughly,....cost?

[@horsetorquesdiesel]

13-16k depending

[@natejohn3586]

Nice colour!

[@ronsreadyornotshop]

that was much better then music in a time laps, sorry that is just me.

[@horsetorquesdiesel]

Appreciate the feed back!

[@blakefarkas9267]

Love the engine building content

[@cbmn91]

i dig the color 🤘🏻

[@horsetorquesdiesel]

Similar to your old race engine

[@cbmn91]

torque-n-teal

[@Sickksidex3]

Is that Frank Mir ? Lol jk. Love the videos keep posting.

[@kyle.carmichael5856]

Crock gang I work on all my stuff with crocks even in snow 😂

[@ColoradoGunfighter]

Looks great

[@joelotto1252]

Do you torque the head studs again after heat cycle or it’s not needed. Color looks good

[@drake_24v_hawkins]

Yea, im sure he didint know that..

[@horsetorquesdiesel]

Yep 2 hot retorques

[@LucasLeCompteMusic]

Paint job is fly.

[@chriscollison3136]

Dude where did you find the teal color? My 06 with compounds has a teal in the turbo housing and rocker box and ext. But I’m a die hard Sam Jose Sharks fan, been to at least 600 to 700 games and a lot a quarter of those are playoff seeings how we make almost every year to not finish it. But I baked my turbo housing with a clear and it turned my real gross green color. I also have wherlie fab Candy teal upper rad hose too. I’m jelly for reals!

[@beardedgaming1337]

if using assembly lube - any risk of priming, washing out that lube if the engine sits for a while before its first start?

[@horsetorquesdiesel]

No it doesn't displace a lot of it

[@jamesmarlar696]

I have always said no need for safety glasses if you squint your eyes enough

[@Balakay9435]

Hell Yeah Brother

[@desertchevy]

In your opinion coolant bypass not worth it?

[@mikebougher3731]

I was wondering the same thing.

[@horsetorquesdiesel]

I like them in tow trucks, in high HP stuff I’d rather clip the pump.

[@chriscaper1510]

How much money do you think you got in your motor?

[@horsetorquesdiesel]

This one, idk maybe 10k total maybe

[@chriscaper1510]

Nice!

[@bcbloc02]

So now that 3k rwhp has been done anybody close to doing 3k fuel only?

[@horsetorquesdiesel]

Why does fuel only matter? Seriously fuel only is like the lamest thing. Todd and I argue back and forth. Literally no one cares how ya make it

[@the_rocky_mountain_rider]

Which CP3 did you go with?

[@horsetorquesdiesel]

14mm exergy cp3

[@asapeek4981]

Why a cp3 and not a p pump?

[@horsetorquesdiesel]

Common rail is king

[@asapeek4981]

@@horsetorquesdiesel 12 value p-pump the king of diesel

[@TheProchargedmopar]

👍💪

[@texashorn1991]

Josh, what are you looking for when you installed injectors in 1 and 6 hole?

[@horsetorquesdiesel]

The injector flow sheet. I put the smaller injectors in 1 and 6

[@benjaminturpin2749]

How much can I purchase one of these engines for? Where would I buy one?

[@horsetorquesdiesel]

Call the shop 276-608-3298 Lots of options

[@jeffbeaird747]

Makita tool blue motor.? Not sure about that...lol

[@lamarzimmermanmennonitefar5269]

Powerstoke time!

[@-.Ascendant]

its the makita cummins!

[@fanninrebel03]

And by “liberal” you mean a “Biden” amount of loctite

[@adamgardner4213]

Merc cruiser made a diesel.... Sorry not sorry I do enjoy the channel though. Well done

[@horsetorquesdiesel]

?

[@stevehall1667]

Petty racing blue sounds better

[@pedal2metal814]

Shipping companies......smh

[@jefflilyea4669]

Totally idiotic waste so you can smoke tires?

[@horsetorquesdiesel]

Then don’t watch… I’m having fun.