I rebuilt one of these, I took all the wires off as an assembly thinking it would just go back in the right orientation, not even close, had to take them all apart and run everything correctly. I was super happy, very easy engine to work on, love the ohv
@wilcharl3 жыл бұрын
Looks like your fellow mechanic went for the parts cannon approach
@OnlineMechanicTips3 жыл бұрын
lol, he's gonna be mad to find out the customer wanted his car back the day he was off...lol..
@fuckwitpeoria3 жыл бұрын
dont know how to direct message you just wanted to tell you thanks and your awesome bro i followed your steps far as the rocker arms and lifters and you save me a lot of money shes purring like a sewing machine
@OnlineMechanicTips3 жыл бұрын
Awhhh thats whats up my man. Glad you got it running and thanks for watching them vids
@unclemarksdiyauto3 жыл бұрын
Hope the other techs diagnosis was correct and the job went for you. Nice explanation of how some of the systems work together. You will have to explain one day why you would not flash a higher mileage vehicle. (i would like to know what benefits to doing it to a lower mileage but not higher.) Have a great day J.T.!
@zoe76573 жыл бұрын
Yes please do update
@OnlineMechanicTips3 жыл бұрын
Why thank you my friend. And yes, great idea, a topic on this discussion coming up but keep in mind. This a personal preference of why im against it. Theres nothing written that states you shouldnt, but I will share my opinion on it and what ive seen over the years
@biggtaetv2 ай бұрын
With all this being said did the issue get fixed?
@zoe76573 жыл бұрын
All great info!!
@OnlineMechanicTips3 жыл бұрын
Why thank you my friend, and thanks for watching
@shestrece3 жыл бұрын
Appreciate the education
@roberteaslick1628 Жыл бұрын
Awesome vidios
@ezeeduzzit3 жыл бұрын
That yellow wire tho 🤦🏾 dealer approved repair 🧑🔧
@OnlineMechanicTips3 жыл бұрын
What up EZ? lol, not sure what yellow wire you talm bout
@ezeeduzzit3 жыл бұрын
It’s going thru the outside the engine part egr.
@ezeeduzzit3 жыл бұрын
@@OnlineMechanicTips I know you see that yellow wire running all over the engine
@OnlineMechanicTips3 жыл бұрын
@@ezeeduzzit o yea, I see it/ Have no idea what customer have it tied into
@allenramirez27782 жыл бұрын
There's a tsb for that p1521, asks for a flash update, and they're are a lot of programming tsb's #18-018-06 engine controls-MIL on DTC'S P2112 or P1251
@OnlineMechanicTips2 жыл бұрын
Yes
@respectpeople91813 жыл бұрын
Whats up JT. If you ever come across broken exhaust manifold bolts on a wk1 JGC, I would love to see your wisdom knock them out. I 'm not seeing an easy/easier way to replace them.
@unclemarksdiyauto3 жыл бұрын
Guys usually (on other vehicles) weld a nut on the broken bolt and heat and turn. Probably will break the weld many times as you do it. I don't know of another way. A good muffler shop might be able to do it for you, or some small mom and pop shop. Dealer could do it too. Do you own a welder?
@respectpeople91813 жыл бұрын
@@unclemarksdiyauto thanks buddy. I haven't tried to get in there yet, i just don't see the space available, like the Ram trucks have. There is literally no room to get to the bolts. I saw one guys said he lifted the engine, I'm not that advanced. Lol
@unclemarksdiyauto3 жыл бұрын
@@respectpeople9181 oh boy, figured there was a space issue. Wish you well. Hope J.T. has a easy solution, otherwise you might have to drop engine down to access? Take care.
@OnlineMechanicTips3 жыл бұрын
Wow buddy, the WK body JGC came with 3 different engine options..Out of all 3 I have yet to deal with such a problem. They been holding up well. You will have space issues if its equipped with the V8 Hemi..I have yet to do one bud, sorry
@respectpeople91813 жыл бұрын
@@OnlineMechanicTips thanks JT, I may try to tackle this, if not I'll bring it to Allpar garage, maybe you can use it for a video. (Hemi 5.7)
@robertearl9976 Жыл бұрын
Did you solve the stalling issue??
@dashton302s6 Жыл бұрын
My 300C 2006 v8 won’t respond the alternator was changed and the ecu was changed also fuel pump. I tried jumping it but it won’t catch , it makes this weird grunt noise .Do you think it’s my battery?
@dashton302s6 Жыл бұрын
Throttle and filter is clean also
@amad_31772 ай бұрын
I have the same car only it’s a 2010 I’m running into the same problem and havnt managed to solve it yet, is there a way I can contact you to ask a few questions
@mikehernandez95673 жыл бұрын
☀️👍🏻 NICE
@OnlineMechanicTips3 жыл бұрын
Thanks for watching Mike
@mikehernandez95673 жыл бұрын
@@OnlineMechanicTips You are welcome my friend
@heller_guy70603 жыл бұрын
Update? How did the test drive to verify the repair go?
@OnlineMechanicTips3 жыл бұрын
My dude, on my 5 mile test drive it pearled like a kitten. But techs cant spend a lot of time driving so I put a porter in it to drive about 30 miles in stop and go traffic. Upon his return, the verdict was no stalling and I re-scanned with the pod and theres no codes. I forgot to mention I did a cam/crank relearn since these 2 sensors was replaced
@shestrece3 жыл бұрын
Also what’s the name of the full scan I should ask the dealer to perform for my 2011 Durango
@trinkajinks2 ай бұрын
Man where are you located? I need help with my 06 5.7 hemi.
@acurame215 ай бұрын
Yoooo where are the o2 sensors top and howbto change them
@OnlineMechanicTips5 ай бұрын
What kind of car is this? Are you subscribed to the channel?
@Gmackk7 ай бұрын
Hey man I’m hoping I can get a response could really use a mechanics advice. I have a 06 300c it’s the 5.7 an I’m getting a code for p0300. I just bought it. It would stall out after I turned it on after about 30 sec - 1 min. Immediately stalls when going I. Gear. So I went ahead changed the coil packs an the spark plugs an ran a little sea foam thru it. It would start an drive fine after that. I got cats to put on it and I put the passenger side one on an couldn’t get the driver side on due to stripped bolds on the mount. But I started it up after I got passenger side on a now it’ll start an run fine but when u put it into gear it stalls again. Is it because there’s only 1 cat on? Need advice!!!!
@Pretyboyflako15 ай бұрын
. You need fuel, spark,air, compression. Sounds like yours is stalling out due to lack of air. Could be dirty filter all the way to a bad throttle body sensor.
@jackangel94653 жыл бұрын
JT, I have a 2014 Challenger RT and I'm struggling to find someone who can write tunes for it. Any suggestions? I'm not local so I'd have to download the tune on my diable i3.
@OnlineMechanicTips3 жыл бұрын
Whats up man...my guys at Allpar Garage high performance shop do that. I will live streaming from over there Thursday and can run it by him
@jackangel94653 жыл бұрын
@@OnlineMechanicTips that would be great. I picked up this 2014 challenger with 10k miles on it. I put kooks headers and cats on it and nothing but codes. I sure could use some serious help. Appreciate anything that can be done.
@frankhartford51943 жыл бұрын
I know you can get email tunes from Jay Greene and hemifever. They could help you right out, alot of people go to them from everywhere
@jackangel94653 жыл бұрын
@@frankhartford5194 I have to do something, it failed state emissions and I'd hate to go back and install the stock manifolds and cats.
@J.Smithsonian5 ай бұрын
o2 defoulers are needed
@johnynava46682 жыл бұрын
Hey i have in 06 Chrysler 300 5.7 engine, my car is missfiring codes p0201 p0205 , ive gotten replaced the spark plugs, fuel injectors and i also gt my pcm reprogrammed and it still throws the same codes,, not sure what to do at this point..
@OnlineMechanicTips2 жыл бұрын
Hey bud, a flashed PCM will not correct say a driver problem in the PCM. Was there any other codes on the PCM? Also are you subscribed to the channel?
@noloosechange1129 Жыл бұрын
Dam im having the same problem
@johnynava4668 Жыл бұрын
@@noloosechange1129 yo I replaced my pcm! It solved everything
@noloosechange1129 Жыл бұрын
@@johnynava4668 nah it still happening took it to 5 shop they say nun wrong wit the car but it keep cutting off and misfiring they said it could be a loose battery 🤦🏾🤦🏾😂
@johnynava4668 Жыл бұрын
@@noloosechange1129 you replaced pcm already??
@williamdon3442 Жыл бұрын
The parts you installed. Did it fix the stall out issue???
@benjiman1216 Жыл бұрын
Check out my KZbin channel for my stalling fix
@erichazelton3358 Жыл бұрын
I’m having the same problem
@elmerfudd52662 жыл бұрын
Why not just go ahead an replace all the internals for the little old lady as well. You know, that MIGHT be causing it to stall out also... 😉👌