How Jeep Suspension Works | Jeep Suspension Geometry Explained

[@extremeterrain]

Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt Check out parts for your Jeep Right Here: www.extremeterrain.com/throttle-out-news-dec2018-2.html What Mods are done to your Jeep's suspension?

[@Wizard169]

As a Jeep newbie, this suspension video provided and excellent overview and was very informative!

[@SkandaTejasw]

Very grateful for this one-of-a-kind presentation with fantastic illustrations! This is exactly what I wanted to know about a jeep's suspension!

[@extremeterrain]

Thanks for watching! -Zach

[@cnevle]

Super helpful! Took tons of notes! This was extremely clear, logical, and thorough. I really appreciate ya’ll putting this together.

[@extremeterrain]

Thanks for watching! -Zach

[@bikesbeersbeats]

The explanation we all wished was included with every lift kit ever! Thank you so much for putting this together in such a perfect form. I now know exactly where I should focus my efforts in fixing the constant wandering on my AEV 3.5 SC lift.

[@extremeterrain]

Thanks for the kind words! Solid axles aren't too complicated, and death wobble isn't *that* much of a mystery, but a lot of people just don't know where to look for the problems in the first place! Hope this helps in the future and you can get your Jeep feeling planted again! 😁 -Zach

[@impendingdom7757]

Very nice explanation! I found it very helpful!

[@jlstevenson]

Great video, super helpful for Jeep newbies! Saved me a ton of money by replacing only the necessary parts

[@extremeterrain]

Thanks for watching! -Zach

[@chuckmarshall8297]

Excellent tutorial on suspension and what lifting does to it. What is also interesting is how different companies address the issues related to the geometry challenges a lift kit presents.

[@AmericanJeeper]

Chuck Marshall there’s more than one way to address it, but the important thing is that it’s addressed

[@4X4JEEPMODS]

Great video Ryan" with some straightforward information,👍 guess I should have watched this one about 7 years ago 🤭lol

[@extremeterrain]

Thanks for watching! -Zach

[@Vodafone16v]

This is GOLD right here! Thanks ExtremeTerrain!!!

[@reconliving]

Great video. Your explanation was concise and informative. Extremely helpful. Is there a possibility that you can discuss the minimum needs necessary to run 35s or 37s to wheel off and on road. Lots of info out there and it's difficult to know what the essentials are to run safely.

[@Doomslice77389]

Minimum on road - 2.5" lift for 35's. 3.5" lift for 37's. If you are going to be wheeling heavy you will want higher fenders or a taller lift with those tires sizes. Just be careful because anything over 4" and something your going to wheel your going to need new driveshafts sooner rather than later.

[@ifp123]

To piggy back on Jason's question: in your vast ET videos, which would demonstrate the type of terrain that needs the sway bars disconnected, as opposed to trails with with foot-deep puddles, bowling ball sized rocks, etc. (I have a 2.5" MOPAR lift, 35" tires.)

[@jeremyhulbert3343]

In addition to the driveshafts mentioned above, new axles and re-gearing are good ideas. 35" wheels will make quick work of the stock axles if you off-road with any regularity. Re-gearing depends on tire size and how you use your jeep. There are handy re-gearing charts you can look up that will show this. The real thing that needs to be understood is that going above a 2.5" lift or 33" tires involves doing a lot more upgrades in addition to the extra cost of the bigger tires and lift kit. Between upgrading the drive train and re-gearing, expect to spend around $3,200 on parts alone, and if you get everything done at a shop, labor will run you around $2,000 (this is why most wrangler owners who don't plan on much off-roading go with 2.5" lifts with 33" tires.....it's enough to look better than stock and doesn't require additional expensive upgrades).

[@alfonsoavarez7074]

I’m on hear doing research for buddies. I drive a 4 runner but buds prefer jeeps. I need to know about their vehicle as much as mine. Just had a buddy with link issues. Thanks for this great informational video.

[@yardlimit8695]

finally a video about steering geometry without a lot of useless jibber jabber and you sounded like you actually knew what you were talking about.......thanks very much for AN INFORMATIVE VIDEO............WILL SUBSCRIBE..........

[@snagatep]

Perfect video and a must see for anyone interested in lifting their Jeep. Thank you!

[@catsgonom]

It really helps that you showed this on the same grey 2 door that I own.

[@lukewebster513]

That was the best explanation video for lifts I’ve ever seen!!! Well done

[@extremeterrain]

Thanks for the love, Luke! We appreciate it! -Zach

[@benjamin3290]

AWESOME video for newbies like me who want to learn how to do this stuff ourselves and actually understand what we're doing

[@extremeterrain]

Thanks for watching, Benjamin! We appreciate it! -Zach

[@dstallard5673]

Awesome video. I am fairly new to the 4 wheel drive scene and have been looking for something like this to explain how the suspension actually works.

[@MrTnfstk]

I love these informative videos you’ve been doing lately

[@nileshladd]

Thank you so much for all the information in this video, extremely helpful as i’m dealing with really bad death wobble on my JLU ever since i installed the Mopar 2” lift kit! Def much more informed now with what i need to look into and possibly upgrade. Thanks again!!

[@extremeterrain]

I'm glad this video helped out! Let us know if you're still having issues down the line and we'll be happy to help out! -Zach

[@aevwranglarjl8667]

thx for the vid, very informative. appreciate if you keep release this kind of technical vid for keep newbie, that’s me.

[@javierfernandez7005]

Very articulate and informative I enjoyed the video very much I did not know nothing about that and it's very interesting thank you.

[@extremeterrain]

Thanks for watching! -Zach

[@chaoticmitty9570]

I just got the Rubicon express 2.5 in with monotube shocks lift kit. The kit mentioned no need to change drive shaft. Unlike other kits that say you need to change it. When i put the rubicon express lift if there more that i am gonna need to do or are the geometry components more of an issue when it comes to 3in and up kits?

[@dagnachewdesta3336]

It is very informative video, I am new to jeep and my question is if I install longer control arm is that means pushing the axle forward which i afraid the tire may rub against the bumper? I have 33” tire thanks

[@extremeterrain]

Adjustable lower control arms would simply bring your front axle back to where it was before the Jeep was lifted! It won't go any closer to your front bumper if adjusted properly. -Zach

[@jeremytysiachney8170]

Best informational video I found. I can now make an educated decision.

[@JwcubTHS]

Very clear, concise explanation, Ryan; great job!

[@extremeterrain]

Thanks for watching, Kevin! We appreciate it! -Zach

[@Omerta_Pariah]

Great information! Answered a lot of questions I've had about all these components

[@fmgeqs]

Informative video in non-tech English. Good job ET.

[@oGCpoTT]

so i bought my jeep about 2 years ago and it came with a lift kit on it, only problem is is that I'm not sure what size it is, and whether it's a suspension or spacer lift. The time has come to buy new shocks, but I need to know what size shocks to buy. And to know that I need to know my lift size, or I can measure the shocks extended and collapsed, BUT it would make it 10x easier to shop buy lift size as oppose to shop buy shock length, how should I go about finding out what size lift I have?

[@AmericanJeeper]

VorteKs if you send me a few pics of the suspension in the front I could help get you started. IG @americanjeeper or [e-mail]

[@dawsonbrooks5071]

my rear track bar is rubbing against my rear passenger spring coil. should i shorten my rear control arms to pull my rear axle away from the spring?

[@EmiratiAuto]

does the Rubicon control arm is long than the sport control arm ?

[@AustinH7]

I’m pretty sure they are the same size. At least on the 2007-2018 models. Not sure about the new JL wranglers

[@carlosmoreno9820]

Noob question here... Will my stock suspension be affected if I just put bigger tires (33-35)? Will I need to do ajustements to my suspension to avoid any damage/problem? Please keep making this video's they are really good and informative!!

[@arnon-jaya]

31 jan 2019 7:14 pm est: i don't know,but large-diameter-spare-tire hanging on exterior-rear-cargo-door,block rear-view during moving backward addition 31 jan 2019 7:22 pm est: maybe large-diameter-tire,make turning-diameter bigger(worse).example:gmc terrain 2018 turning diameter : ft / m 37.4 / 11.4 (17-in. wheels) 38.4 / 11.7 (18-in. wheels) 41.6 / 12.7 (19-in. wheels) source:'turning circle' in media.gmc.com/media/us/en/gmc/vehicles/terrain/2018.tab1.html from google (gmc.com gmc terrain turning diameter) result 1

[@Halfwheelhell]

Excellent video! Very informative. I would rename the title to include "Front" suspension as very little (none?) of the rear geometry was discussed/explained, which is what I was searching for.

[@IbericaOverland]

Great info, very clear, I only would loose the loud music. You should have more views and subscribers. Cheers

[@John-uo1qf]

So informative! I'm planning a 2.5" lift on a 2016 JKU. Do I need to replace the front and rear track bars? How much lateral shift will a 2.5" lift create?

[@extremeterrain]

You'll see your front axle be shifted to the side about an inch, honestly. I would highly recommend adding an adjustable front track bar to your Jeep along with adjustable front lower control arms to get your suspension back aligned! Your Jeep will handle much better also, they're great additions if you have room in your budget. -Zach

[@recreation_outdoors]

So, if I were to purchase a 2.5" lift kit, it's recommended that I should purchase a kit that comes with control arms, track bar, drag link etc?

[@yiayang3403]

Very informational. My question is about alignment. So is it ideal to get the toe and caster to factory spec?

[@PittsPhotography]

Wonderful video! Great presentation to make this understandable to the general consumer, very educational!

[@extremeterrain]

Thanks for watching! We appreciate it! -Zach

[@justinmcc1234]

Very good video! I have a 2021 4 door Jeep wrangler Rubicon can you please list a couple 3.5" complete lift kits that will cover everything that was mentioned in your video? So one doesn't have to worry about geometry issues at all?

[@extremeterrain]

Thanks for watching, and I absolutely can! The JKS kit below would be amazing when paired up with a set of adjustable lower control arms. Or if you want everything in one kit, you should check out the following ReadyLIFT and OldManEmu options! -Zach www.extremeterrain.com/jks-jeep-wrangler-j-rated-35-in-suspension-lift-kit-jspec-gas-shocks-jspec119k.html www.extremeterrain.com/old-man-emu-jeep-wrangler-25-35-inch-heavy-load-suspension-lift-kit-omejl4dhks.html www.extremeterrain.com/readylift-jeep-wrangler-350-inch-3-inch-terrain-flex-4-arm-lift-kit-falcon-21-shocks-69-6837.html

[@landcruisertroopytouringan2166]

Well presented, spoken and explained. 10/10 Thanks

[@joshleal9811]

Hi. I jus buy a jk with a lift, the jeep have a very bad wandering feeling while driving. I replaced ball joints, new track bar. Shocks, steering box, but still having the same problem. You think a tide tie rod can cause wandering or fix the caster can be better..

[@extremeterrain]

If you haven't replaced the tie rod ends yet, I'd highly recommend it. That will really help tighten things up in your steering. If your lift doesn't have adjustable front lower control arms either, I'd recommend looking into them as well. They will allow you to adjust your caster, which will help your Jeep track straighter down the road and not wonder as much. - Zach

[@jhustinsanchez7600]

Perfect guide for someone with not much knowledge

[@TheJoePhoto]

Hi.. I have a '99 XJ that wonders at highway soeed.. Everything has been replaced on the frontend and it still wonders.. Any advice on fixing the problem..? Thanks Joe..

[@extremeterrain]

Hey, Joey! Is your Jeep lifted at all? If so, it may be worth looking into an adjustable front track bar and adjustable front lower control arms to get your alignment where it needs to be. I'd also recommend checking your tires out, if they're overinflated or have irregular wear it can contribute to negative handling characteristics. Best of luck! -Zach

[@ekuryluk]

Great video, first time I’ve heard about keeping the trackbar and draglink parallel, totally makes sense. Have you driven that Jeep? There isn’t a spec of dirt anywhere.

[@AmericanJeeper]

Nice video and fairly concise explanations

[@willboyd8021]

Thank you for the information I do have a question I have a 2018 jeep I put on a Rubicon steel bumper and a whiches the front in is no longer level you told me I need a 3/4 space to keep the front of the jeep level. When doing that do I need to change anything else or my suspension? Also I went on your site and I seen a rough country 0.75 Front leveling kit is that what I need to level it off

[@extremeterrain]

Nope! The only piece you'll need to install is the spacer itself. No other parts will be needed. The leveling kit you found sounds like it will work perfectly, just make sure its for your respected Jeep (JK or JL). -Zach

[@mikethompson7406]

I ordered my first Jeep, a '22 JLUR. It's due to arrive by the end of next week. I wanted a 2" lift and 35s until I watched this video. Now I wonder how much this is going to cost me to do it right?! Thanks for scaring me out of my large purchase!

[@extremeterrain]

Hey, Mike! This video wasn't made to scare you, only to make you aware how Jeep suspension geometry works and how lifts affect angles! You're getting a Rubicon, right? You'll be able to fit 35s on there right from the factory! 😁 -Zach

[@0426dav]

Ryan, I am thinking of installing a 1"or a 1 1/2 inch front coil spring spacer on a 2022 Wrangler JL., Just to level it. Do I need any other parts for my application? Thanks

[@extremeterrain]

Not really just for a 1" spacer! You could always look at adding an adjustable track bar to help keep your axle centered up front, but that can wait until you lift your Jeep higher if you don't have room in your budget. -Zach

[@stephenanderson5630]

Many people need to watch this.

[@extremeterrain]

Thanks for watching! -Zach

[@PoppaSimTV]

thinking about getting the 2.0l turbo rubicon... do u think 37s with a 3 inch lift would be ok or would it be too strenuous for the 4 cylinder?

[@AmericanJeeper]

Poppa Sim you’ll be fine with the engine but the turbo will have a shorter life than the 3.6

[@georgeeads8689]

Now that was some good information. Thank you. I want to put about a 2 1/2 inch lift on my TJ. Where can I go to find all the correct components I will need?

[@ShaneAshtyn]

Question, I recently put a 2.5 inch Rough Country lift kit on my 09' Jeep Jk with 33-inch tires. I also replaced the trackbar, drag link assembly and tie rod. I live in Brooklyn and mainly use this as my daily commuter. no off-roading. Is it necessary for me to replace my control arms and if so which ones do you recommend?

[@extremeterrain]

Not totally necessary, but definitely recommended! Adjustable front lower control arms are really all you need at 2.5" of lift, you'll notice an improved ride and handling with them for sure. You should check out this option from Freedom Off-Road! -Zach www.extremeterrain.com/freedom-off-road-jeep-wrangler-adjustable-front-lower-control-arms-for-0-65-in-lift-fo-j703fl-adj.html

[@toddschultzandkaysar3530]

Great video..I have been needing to watch this for some time..thank you..

[@mickeythompson8770]

so my comment would be does someone make a fixed lower and upper control arm for strength? or if the new adjustables come with factory length specs to adjust correctly?

[@extremeterrain]

You can absolutely find fixed upper and lower control arms that are made stronger than factory! The vast majority will be for lifted applications though. The only options you'd be able to find for a stock Wrangler would be adjustable ones. -Zach

[@PistonMotorss]

for 2 inch lift it is necessary to change all this arms or bars ??? for JL

[@kdard89]

My mopar 2" lift came with new control arms, springs, sway bar end links, bump stops and shocks. Everything else stayed the same. Must get an alignment afterwards. 2018 JLU Sahara

[@AKArusty]

Thank you for such an informative video!! Please do more like these.

[@startexpedition]

Muchas gracias por el vídeo. Saludos desde españa

[@rodspov1915]

Awesome! Well explained and easy to understand. Thank you!

[@gurjotsandhu8016]

Hello boss, I recently bought Jeep JL 2018, 78000 kms on it. It has 33’ tires, 2.5 inch skyjack lift kit. It makes clunk sound on slow big bumps mostly on the turns.My Drag link was having little play I have change it but still it makes the same sound. Technicians had taken a look on it but he was unable to find any thing.there’s nothing loose even. What can u suggest. Thnks

[@extremeterrain]

You'll want to check your tie rod end links, ball joints, control arm bushings and wheel bearings. Any one of those places can cause a "clunk" when worn out. -Zach

[@edp9517]

Awesome video mate 🧉

[@extremeterrain]

Thanks for watching, Ed! -Zach

[@girldad4life24]

I have all these issues. Front axle is off center, major vibrations on the highway, Axles/tires arent centered when looking at the side of the Jeep. I put in 5.13 gear on stock axles along with 3.5 MetalCloak GameChanger (2012 JKU - Sahara), I'm sure that the new Yukon driveshaft isnt in the right angle as well. I need some work done to repair all of that. smdh.....

[@Furens]

So if I have a stock JKU is there any reason I would not want a kit that includes all the discussed parts? It sounds like every part mentioned should be replaced to accommodate the lift.

[@extremeterrain]

As long as you have the budget and you're doing more than a simple 1.5 inch leveling kit, there is no reason whatsoever that you would not want a kit that includes new track bars, lower control arms, swaybar links, brake line extension, etc. The more components you replace to correct your geometry the better you Jeep will perform, ride on the road, and last overall through regular usage. There are plenty of great budget level systems out there, but you really get what you pay for. -Zach

[@Venom_Fm33]

Where can i get more i fo anout uou guys i need help in my jeep im new to this.

[@WranglerAddiction]

Hey , any jl front adjustable track bar in stock?

[@bubbshalub]

does anyone know the consequences of using the factory sway bar links with a lift? I've installed a 3.5" lift, but it did not come with front sway bar links (it included rear sway bar links oddly enough)

[@extremeterrain]

A lot of budget-oriented lift kits will give you a new set of rear sway bar links, then have you use your factory rear links in the front of your Jeep since they're naturally longer anyway and they'll accommodate the new lift height. If you have the room in your budget though, getting a set of new front swaybar links with disconnects is a good idea! Especially if your factory links are worn. -Zach

[@lekupeabraham7637]

Hello Extreme Terrain what type of jeep is this?

[@extremeterrain]

The Jeep in the video is a 2018 JL Wrangler!

[@Adikxx]

Fantastic video

[@extremeterrain]

Thank you for watching! -Zach

[@bezalelex31]

Best clarification yet! Subscribe!!!

[@extremeterrain]

Thanks for watching and subscribing, William! We appreciate it! -Zach

[@hewen8199]

Very lucid explanation. Much appreciated. The music is annoying, hope you'll cut it in future.

[@edrock400]

Looking for some help. I have 2015 JK with a AEV 2.5 in lift, correction brackets, Fox steering stabilizer, alignment done. Then added 35’s. I now have play in steering and slobby on highway speeds. Constantly keeping the Jeep in line. How can I fixed this issue? Any help would be greatly appreciative

[@extremeterrain]

I would check out your track bar, ball joints, front lower control arms, and tie-rod ends. Since all of those are wearable parts they may be worn just enough to cause loose steering now that you added the extra weight of 35s. If you don't already have one, an adjustable track bar may be a nice option to add to keep that front axle centered as well. Also, make sure those 35s aren't over-inflated because that can cause wondering in steering as well. Hope this helps! -Zach

[@edrock400]

ExtremeTerrain.com thank you for the quick response. I lowered the tire pressure down from 40 psi ( tire shop set it to 40) to 34 last night. Do you think that is a good psi? Gotta drive the Jeep today and test it. Thank you for the other information I appreciate it. Gonna look into a track bar.

[@extremeterrain]

34 psi should definitely have things running smoother! A lot of tire shops see "max psi" on the side of mud tires and think that they need to be filled that high for daily driving. I'd still recommend checking everything mentioned just to make sure you don't develop any shimmy in the future, and that adjustable track bar will really help things feel planted on the road. -Zach

[@edrock400]

ExtremeTerrain.com Will definitely look into the track bar. thanks for you time Zach!

[@juanpabloonate4025]

I put 33s BF a/t on my tj 02 4.0 with a RC 3.5 lift and I get a lot of vibration on the highway, pretty much over 50mph. All this right after the lift, all I hear is is a jeep and that's how they ride, BS!! before was absolutely fine and now feel lose and noisy. I was told with this kit didn't need any other parts or modifications, any ideas, suggestions or help please.

[@extremeterrain]

Vibration while driving after a lift kit is installed is most likely coming from your drive line. I'm not entirely sure what all was installed with that lift kit, but here's a little list of extra parts I highly recommend you look into. Adding them will really help your suspension geometry and the ride of your Jeep, along with solving the vibrations: A front adjustable track bar, front-lower and rear-upper control arms, a slip-yoke eliminator kit and a new rear double cardan driveshaft (this will go with the slip-yoke eliminator kit). If you need more assistance, please get in touch with our customer service team and we will be happy to help! -Zach

[@juanpabloonate4025]

Thanks for the help, I would have all this parts install and see what happens, hopefully fix my issues Thanks again JP

[@brokesxs2547]

Rear control arms ? Are they important to change for ride quality!? I have a 4 inch lift

[@extremeterrain]

Rear control arms are going to effect your pinion angle and axle placement mainly, but will help your ride quality as well! If you're still using the stock control arms on a 4" lift, the angles of them are most likely pretty steep. -Zach

[@brokesxs2547]

Well I guess I need to be buying a set

[@N0l0ngeralive]

Very good 👍🏽 information..

[@extremeterrain]

Thanks for watching!!

[@joshleal9811]

Thank you zach. I will check it out.

[@John-uo1qf]

Very informative

[@extremeterrain]

Thanks for watching! -Zach

[@BillyTpower]

is this such a big concern for small lifts? 1.5"

[@CarlosCruz-xd3tw]

Great information! very helpful

[@FloridaHockey11]

Great info, thanks 🙏

[@extremeterrain]

Thanks for watching! -Zach

[@robert5712]

Good information and well done video and explanations but for many the background music interferes with clearly hearing what you are saying. Please drop the extra unneeded music noise.

[@jerrymestas1231]

Awesome information!!!!

[@extremeterrain]

Thanks for watching, Jerry! We appreciate the love! -Zach

[@TheNastynelly1]

awesome video!

[@chetmakowski463]

Great video! Thanks!

[@nickgrandy3098]

Oh man... this is gonna be good...

[@schoocg]

So well done thanks.

[@extremeterrain]

Thanks for watching! -Zach

[@jlateralus21]

I guess I shouldn't go with just shocks and springs... 4inch TJ lift just got a lot more expensive

[@extremeterrain]

Yeahhhh at 4" of lift I would highly recommend looking into make sure you snag some aftermarket adjustable control arms, an adjustable track bar, and something to address your factory driveline angles (like a slip-yoke eliminator kit with a new rear driveshaft). Feel free to give us a call or email and we'll be able to get you taken care of when the time comes! -Zach

[@mikekowalewski7692]

Thank You...

[@extremeterrain]

Thanks for watching! -Zach

[@jeepnwitht]

Thanks for the info!

[@owl9416]

Very Interesting!

[@nitropowerful1]

When are you gonna start modding that thing kid?

[@jman3763]

Nice JL Ryan

[@haroldbrown3452]

damn, this video is an A plus BIG TIME !!!!!!

[@extremeterrain]

Thank you for the feedback! -Zach

[@Heathernjames6969]

Didn’t mention about driveshafts.

[@errhka]

This would have been a little more helpful if you guys had highlighted the parts you were talking about when you were showing them onscreen. Love the rest tho!

[@monkeyman41333]

He pointed directly to them.

[@xArshhh]

Wow that really helped

[@noel3620]

So good

[@coolchewschannel3674]

The music why

[@fotoigaist]

Great video, but please turn down that music

[@nickcrescenzo6751]

I believe my brand new, stock JL began to develop bump steer at around 6000 miles. SUCKS!

[@joncruz]

This music man totally ruins the purpose 😡

[@세운상가키드]

gold