That looks so much easier than the parts guy or the mechanic I talked to. I was a little confused, I was told you have to remove the tire, pull out the plastic wheel well just to get to the part. After watching your video. I replaced mine in just a few minutes, only needed a 10mm socket and a flat tipped screwdriver. You made it look easy, and it was. Now about that video production quality. Well it was good enough for me to follow and get the job done. So I say um, Well Done. And thank you very much.
@christinacraig58643 жыл бұрын
Thank you the video. made it look super simple! will be changing this tomorrow in my 2008 impala.
@jerrycannon69403 жыл бұрын
our 08 has a problem with filling the feul tank. the nozzle keep clicking like the tank is full but it's not.
@jerrycannon69403 жыл бұрын
is your car fixed now?how is it doing?
@christinacraig58643 жыл бұрын
@@jerrycannon6940 yes. It was fairly simple to fix and doing great thank you
@jnray094evr7 жыл бұрын
This was perfect I accidentally got there just as you was teaching on the po449 evap with the power probe II. Just so happened I got an impala lt 06 so it was a cool move. Thanks Bro.
@fullproofgang6 жыл бұрын
Greta job man very visual
@srtg388310 ай бұрын
Would this cause an p0443 code?
@matthewn8443 жыл бұрын
Thank you 🤘🤘
@BrainFogDanellesReviews5 жыл бұрын
U dont have to remove the nut. It slides off bracket
@jnray094evr7 жыл бұрын
Got a question on what's your best idea on removing the vent solenoid and blend door? 06 impala lt. 01/30/18
@verinb95 жыл бұрын
U made this look ez! Give this man a 🍺! 👍
@Bbarbarina215 жыл бұрын
Thanks..Awesome
@garbedge24 жыл бұрын
Thank you!!
@how2af2634 жыл бұрын
You’re welcome
@1017Icey4 жыл бұрын
do I have to have the extra/brand new harness?? or am I okay w using the same one?
@funnypranker344 жыл бұрын
I got a p0455 large evap leak on 06 Monte Carlo (same as the impala) and I want this code gone so I can use my remote start but I don’t know whether it’s the vent valve or a busted line cause I replaced my gas cap already
@rhettharkleroad61054 жыл бұрын
Having the same problem bro, did you figure anything out
@funnypranker344 жыл бұрын
Rhett Harkleroad never did actually but check the evap system under the bumper
@SHANKDAWGBABY3 жыл бұрын
Same issue I'm having so I'm wanting to make sure I replace the right part
@brittanibaines24292 жыл бұрын
does the engine light go right off cause mine didnt
@Anime-bd9hh6 жыл бұрын
Did it remove check engine light?
@changingfaces46706 жыл бұрын
I did not buy the additional wire, but the old wire hooked up nicely. Does it matter or should I have ordered the additional wire adapter. The engine light did not turned off just yet.
@mharradine575 жыл бұрын
The additional wire is only required if your connector is different than the new part. You are good if it plugged in.
@JohnyConsumes5 жыл бұрын
So i replaced my solenoid but cant seem to get the check engine light to go away. Tried to erase it with an OBD scanner and even unplugged the battery for 24 hours. Any ideas?
@Yourhairgrowswithyou5 жыл бұрын
John Vazquez it could be something else cause your engine light to come on. Try going to get the codes cleared at your mechanic it should disappear after that, but if it happens to pop back on you may need to get your vehicle checked.are you sure of what codes you got ?
@Shotbymic_25 жыл бұрын
It could be the hose going to the solenoid that could be a leak or the purge valve on the front of the engine under the cover on the driver side.
@rasoolzakee30823 жыл бұрын
My car keeps stalling out at red lights but when I get a full tank of gas it runs a little better what could it be
@llg74563 жыл бұрын
Where is it located? Video didn't show where you went
@DoubleD80563 жыл бұрын
He’s wrenching on it
@jerrycannon69403 жыл бұрын
my wife's impala issue is that it's hard to put feul in the tank. problem will be solved now!!!
@how2af2633 жыл бұрын
Hello thank you for sharing. I know the frustration.
@shenalally22143 жыл бұрын
Now...how to replace purge valve?
@murphychapman7686 жыл бұрын
hello where did you order the part
@draciermaliki47876 жыл бұрын
Murphy Chapman I just got one from rockauto.com for 18 bucks
@hassana11927 жыл бұрын
My car is not accelerating after a complete stop for a couple seconds, then it pops up so crazy. Was that the reason why you changed those parts?
@sledhead886 жыл бұрын
That' sounds like a transmission issue. I had mine acting like that a few years ago. Its a common trans issue.
@edr84366 жыл бұрын
As sledhead88 said, it is a transmission issue. That happened to me as well and ended up having to replace my transmission as it completely went out one day while I was driving.
@camarobossman6 жыл бұрын
Me to my impala would do it from a stop position I found out it was losing hydraulic pressure repair shop wanted close to 2200 so I sold it to my dad and let him take care of the rest. 2006 LS impala.
@angieberumen35666 жыл бұрын
I have the same issue to . Whats could it be
@Science_is_Better6 жыл бұрын
That is a solenoid inside of the transmission. Had a recall on the part years ago. Have to drop the bottom of the transmission to fix it or just live with it. I live with it
@lunchmuny78762 жыл бұрын
Can you do the delete? Asking for a friend 😆
@MrDJSTRATEGY5 жыл бұрын
✔✔✔✔✔✔✔
@juegosever3 жыл бұрын
P0455
@djblingazworld3 жыл бұрын
Part number please anyone?
@seddrickconley17543 жыл бұрын
He plugged the wire connector from selonid to car car connector backwards look at wires when he gets done white running to red that's backwards red supposed to run to red white run to white please make sure u hook plugs up correctly or you will still have check engine problems
@how2af2633 жыл бұрын
Good observation. The new part was supplied with an adapter harness for the updated parts. No wires were removed from their connectors. Time 5:52 mentions the new adapter harness. Thank you for watching!
@pearliegatez3227 Жыл бұрын
Hi, did you have to jack up the car? Sorry if it's a silly question. 🫣