Рет қаралды 6,470
Instructions on how to set the Hummer H3 in Relearn Mode:
1. Raise the Tire pressure of each tire to 35-37psi
2. Engage the E-brake / Foot brake
3. (Do not start the vehicle) Switch the Key into the "On" Position.
4. Using the headlight switch, Switch from "Auto" to "O" to "Auto" four times
** if you do this correctly, the H3 will "honk" two times
5. In clockwise order, starting with the front driver side tire, release some air, until you hear a beep or "honk"
6. When you hear the "honk" that tire has been relearned. Proceed to the next wheel (Front passenger tire, Rear passenger tire, rear driver tire.)
7. Once you do all the tires, turn off the car. This will save and exit the relearn mode.
You may have to repeat this once or twice to get it correctly.
If one of the tires do not get recognized during the steps, that tire might be out of battery. You will need to get the whole TPMS sensor replaced.
You hope this helps you on relearning your TPMS sensor on your truck.
Thank you for watching!
Facebook :
/ how2helen
Can you help us to get to 1k Subscribers? Thanks!
Song: DayFox - Foxylicious (Vlog No Copyright Music
Video Link: • [1 Hour] - DayFox - Fo...
Music provided by 1 Hour Vlog No Copyright Music.
Channel: urlz.fr/9UQL