Certified here. No tinning of wires being held mechanically. For terminal installs, like this, you would use crimp wire ferrules. Really clean look too.
@heldercoelho16714 жыл бұрын
Came for the gearbox adapter video stayed for the wicked content keep up the good work dude
@MODIFYUP4 жыл бұрын
thank you helder very kind words!
@TheHonestlySneakyGamer4 жыл бұрын
nice build. but you shouldn't tin wires that are going into screwed terminals, they work loose. Get yourself some bootlace ferrules
@ishaanahmir62313 жыл бұрын
instablaster.
@Equalizer-ZA3 жыл бұрын
Well i havent built 1 yet but actually own 2 which my sons use and they are flawless ...... work like a dream great video THX
@MODIFYUP3 жыл бұрын
Thanks for watching Robert
@caliginousmoira85652 жыл бұрын
you may call my logitech junk but i still have my og gran turismo wheel from the ps2 days.... and it still works just fine.... you may hate it but good ol logi hasn't let me down yet.....
@youpi4032 жыл бұрын
same, got g27 like 7 years ago, this shit just doesnt die its awsome
@davidfpv62694 жыл бұрын
Great video man, quality is on peak. Was astounded when I saw how few subscribers you had! I liked and subbed and hope to see more videos from you :) Thanks
@MODIFYUP4 жыл бұрын
Thanks for the support david!
@paklekj44292 жыл бұрын
@@MODIFYUP Can i use nema23 stepper for the motor?
@AndyMutiny4 жыл бұрын
the person who disliked this is using a logitech wheel
@MODIFYUP4 жыл бұрын
Hahaha
@NagoL67BeatSaber3 жыл бұрын
Nah. I would agree with what he said. Logitech literally makes a wheel that claims to be "Driving Force by Logitech G takes the latest racing games to the highest level." Which I find completely bs For 400 bucks this thing has many problems such as, faulty centering, faulty motors, bad FFB, Software crashing, and much more that I don't feel like explaining. In all honesty, get the G920/G29 if you have no other option. I would personally recommend literally any thrustmaster wheel with the logitech shifter, you will need an adapter but the shifter is like the only good thing logitech has rn...
@dezolatetrax3 жыл бұрын
i've just finished my first try to build force feedback steering wheels with arduino leonardo & sewing dc motors, it's feels satisfying to feel my first ffb wheels, and looking up some direct drive actuall high level of diy sim in this field imo :o
@bhdproduction20072 жыл бұрын
Nice. Do you by any chance have a guide to build?
@THE_SXMPLER8 ай бұрын
I was caught off guard when this dudes room pops up on my phone. 😮
@emilianomelgarejo33193 жыл бұрын
the SIMCUBE CONTROLLER FORCE FEEDBACK IS MORE EXPENSE TO ONE FANATEC COMPLETE FOR 350 DLS
@macciner96173 жыл бұрын
YOU ARE GOD! AMAZING BUILD AND VIDEO, THANKS! (yes, I'm screaming)
@carter2403 жыл бұрын
Really nice build! Is there much of an advantage to building one of these anymore now that the VRS wheel base is available for close to the same cost?
@StopaskingformynameYouTube3 жыл бұрын
That computer fan is 12v, you don't need any step down converter for a computer fan as they are all 12v, unless you use some obsure ram-cooling fan or laptop fan that runs on usb-power. ALL regular case fans are 12v.
@arranmc182 Жыл бұрын
I want to see someone put a DD wheel like this on a Playseat Challange or X-Rocker XR Circuit Racing folding rigs and see if they can stay upright as I could see them getting tossed about a fair bit with the forces, I have a X-Rocker XR Circuit Racing and the t300 even makes that whole rig shake lol
@dkiiv2 жыл бұрын
hey, i know this is a older video but PLEASE do NOT use solder as the "connector" for the screw in terminal blocks over time, the solder will deform out of the way and thus increase resistance, then heat will follow, then boom you have a fire. this is well known in the 3d printer/CNC community. please instead use a crimped connector or BARE wire!
@lavachemist2 жыл бұрын
Great Video! However, never solder mechanical joints. You can use a "boot lace" crimp on connector for the screw terminals. This is a safety concern that you definitely should fix.
@pedro_82403 жыл бұрын
Any "recent" (made in the last 15 years) computer fan is 12V, not 5, also, no need to test around, pin 1 is ground, 2 is 12V, 3 is the tach signal and the fans with 4 pins, the 4th is the PWM signal to control RPM.
@paskatvideotfan87604 жыл бұрын
Very good video, Instant subcribe
@janzugic67984 жыл бұрын
THANK YOU FOR THIS VIDEO!!
@gamingnoobxp65184 жыл бұрын
love it.. i m not any type of engineer . but i want to build this. alos expensive more than Logitech G29.
@janzugic67984 жыл бұрын
g29 isnt direct drive. no wonder its gonna be more expensive
@Cypher38823 жыл бұрын
Considering you will pay probably close to 2500 to get a good dd wheel, it depends on if you can even truly take the time, and to want to do this, and come out with a dd wheel over a Logitech g29..yeah its more expensive than a g29.
@BeardedPickIe3 жыл бұрын
@@Cypher3882 you can get a dd base for 350 euros lmao
@THESHADOW971392 жыл бұрын
@@BeardedPickIe yes .... but when you add all the necessary accessories you get big numbers
@BeardedPickIe2 жыл бұрын
@@THESHADOW97139 yeah but not 2500, i mean you CAN spend that much, but you don't need to. you can get pedals, base and wheel for 700$ and easily build a handbrake and shifter, there are plenty of good tutorials on those too.
@CA8OOS310 ай бұрын
Great Video on the build but I have a question. How did you wire the power button to your button box? It's the one thing I have not figured out yet it how to wire a power button to a sc1
@ali012alshair3 жыл бұрын
Hi, Should I buy and install the BISS-C encoder separately or does it come with the Motor already installed? and can I choose another motor or should I just use the "Mige motor 130ST-M10010" ? thx
@MODIFYUP3 жыл бұрын
you can specify which encoder you want with the motor when you purchase it so it will come already installed. Just be sure to pull the cover off and confirm you were supplied the correct one. The small mige is a fantastic motor which will be enough for 90% of people. if you want something ridiculous go for the large mige.
@seanmack92073 жыл бұрын
Hey man this would be better than a VRS wouldn’t it being simucube controllable, I’m in Aus and not sure what way to go...
@MODIFYUP3 жыл бұрын
VRS directforce pro is almost identical hardware. I would imagine the vrs ffb would be comparable to the simucube ffb so you need to choose what better suits your situation and price bracket. The VRS is definitely a great option for the asking price.
@seanmack92073 жыл бұрын
@@MODIFYUP yeah from what I can see the simucube software is probably better than the VRS, dollar wise it’s probably cheaper to build my own. Got some thinking to do thanks for the reply man.
@deividasabrutis7248 Жыл бұрын
Would not recommend keeping motherboard on metal surface as capacitors might be charged and short out some components
@williamfrance-3 жыл бұрын
Hey mate, great video! Would you be able to link to some of the software setup tutorial videos you mentioned? I ended up using this video and your parts list to build my own small mige OSW so thanks a bunch for making things so easy!
@tricenguapo80472 жыл бұрын
What if i use the inside of g920 and connect it to a big motor? I know the power of g920 is not enough but whag if we use a power multiplier?
@oscarprogamertime45044 жыл бұрын
Hi, thxs for the time to show us, when you bought the motor from alibaba did it come with the encoder and cables for the motor or you have to order separate??
@MODIFYUP3 жыл бұрын
you need to specify that you want to purchase the shielded version of the cables as they do not come with the motor as there are multiple sets of cables depending on which encoder you specify.
@indrawijaya62804 жыл бұрын
great video mate, unfortunately it's too expensive to build. Can you make the cheaper version?
@egamundoy4 жыл бұрын
This is an OSW mate. Any cheaper and you’d want to look at a sim-plicity with 8nm or less.
@laurocuha65462 жыл бұрын
Hey, I'm wondering does hiccup overload protection mode equal to what mean well calls constant current limiting on their UHP-1000-48/PSPA-1000-48 power supplys? Is just the overload protection fine with that mode or should the over voltage protection also have that mode?
@darcymccormack53154 жыл бұрын
can you make a vid on your rig it looks like it’s made of aluminum tube rather than aluminum extrusion
@MODIFYUP4 жыл бұрын
Hey darcy you have very keen eyes! yes my rig is made out od 3mm thick alloy square tube which i tig welded and it is absolutely rock solid. I havent done a video on this as tig welding is very far outside of the sim racing spectrum. if this is of interest i can definately throw a video together. thanks for watching!
@mypronounismaster44502 жыл бұрын
how does this compare to a pre-assembled FFB DD of any brand?
@franciscotucci51092 ай бұрын
All link are dead, supposes to be like that after 3 years, could you please update link for purchasing parts but being in USA or Mexico
@emilianomelgarejo33193 жыл бұрын
please construct one pedals usb for use to magnetics sensors please
@michaelray92332 жыл бұрын
how did you turn your thrustmaster to fit with your DD wheel? does it also work with the sf1000 one?
@arkanboy4618 Жыл бұрын
Any advise what should I modify here to be able to run that custom stuff with ps5 console?
@comdrive3865 Жыл бұрын
late reply but I used a GIMX adapter to run a old g27 wheel on ps4, maybe they've updated it to ps5, should be about $30 for the adapter and the software is free.
@RALLYFANCLUBn12 жыл бұрын
где продаются управляющие платы симукуб?
@manuelgutierrezsolis97393 жыл бұрын
What would be aprox the price of building one of this pieces?
@monyx11014 жыл бұрын
$64 Q - price of this DIY MIGE DD?
@MODIFYUP4 жыл бұрын
If you can make your own motor mount and shaft mount total should be around $1280 aus. There is a lot of shipping cost and our exchange rate is quite poor at the moment.
@emilianomelgarejo33193 жыл бұрын
i love you man
@luikkari56653 жыл бұрын
what size is that gold steering wheel spacer
@885wc3 жыл бұрын
I'm debating between building an OSW vs buying VRS Direct Force Pro....tough choice
@Nikolas4g633 жыл бұрын
aren they the same thing realy? (forgive my ignorance if its not)
@Nuke-China3 жыл бұрын
@@Nikolas4g63 the VRS is prebuilt versus the OSW doing it yourself
@Nikolas4g633 жыл бұрын
@@Nuke-China aa yea true. When I calculated costs they come at the same cost (including shipping to me) with the difference that they will run on a different software. But the main servo is the same. But also there is the added cost of “time” when building the diy osw.
@barstoolpreacher78513 жыл бұрын
Would it be possible to use the board from a logitech wheel for a controller
@MODIFYUP3 жыл бұрын
not to power a mige. the encoder is totally different not to mention the g29 uses a 65w power supply. the mige supply is 1000w thats a 1440% power increase. also the logitech is configured to run 2 tiny motors on a rack and pinion system.
@barstoolpreacher78513 жыл бұрын
@@MODIFYUPthanks for answering mate
@franciscotrujillo81042 ай бұрын
How can I connect it to my Xbox
@theprojectchannel50453 жыл бұрын
Nice video sometimes you move to fast and it’s hard to see what’s going on. Not complaining but you have only saved what £100/£200 and had the hassle of building it
@MODIFYUP3 жыл бұрын
Thanks for watching. If building something is a "hassle" for you then this is not the direction for you. many people such as myself find the build process just as enjoyable as using the thing. anyone can throw money around and buy what they want but building something with your own 2 hands is a totally different story.
@theprojectchannel50453 жыл бұрын
@@MODIFYUP I would much rather build then buy but my point is you aren't really saving that much and if there's not much of a saving you mite as well buy and have all the warranty and piece of mind. For me I could build it with no problem it's the computer software that confuses me I can't get my head around it its just easier for me to have plug and play with all the software there. Still it was a great video and I enjoyed watching it
@DarkVisionArtDesign3 жыл бұрын
Hmm...nice work! Can you play Forza 7 with it??
@MODIFYUP3 жыл бұрын
Hi thanks for watching. I believe you can get this working with emuwheel or gimx. Forza does not natively support granite devices or direct input ffb but using emulators you can achieve a pretty decent result from what i can see.
@DarkVisionArtDesign3 жыл бұрын
@@MODIFYUP Hmm...should I rather use the Clubsport V2.5? This should be working natively with all Forzas I think.
@istvanilosvai29624 жыл бұрын
Oof i can't really order all the parts so i think ill stick with my logitech momo for a bit :P. I really like that wheel but it's 180 degrees, and i really need that 900 degrees.
@kinangeagle1333 жыл бұрын
What?
@istvanilosvai29623 жыл бұрын
@@kinangeagle133 The comment is about me complaining about my current steering wheel and my shitty country where simucube doesn't ship
@kamdenpopp3713 жыл бұрын
dude are you the tiktok guy with the floating shoe?
@RolandoAlvarez3 жыл бұрын
Great video too bad I found it after I bought a direct drive wheel base lol
@bailz9t23 жыл бұрын
owuld you build these ?
@muloom15923 жыл бұрын
Does this work for console or would you need a different board?
@MODIFYUP3 жыл бұрын
yes have seen this setup on console (PS4) using something like drive hub or true drive. totally game dependant though. alot of the arcadey games wont support something this awesome
@muloom15923 жыл бұрын
@@MODIFYUP alright thank you I was wondering if it would work on any type of console
@CRF468R4 жыл бұрын
Would this work on Xbox
@MODIFYUP4 жыл бұрын
Hi charlie without looking into it too much, doesnt look like there is native support for simucube althought using something like gimx or drivehub might yield some good results. good luck
@CRF468R4 жыл бұрын
@@MODIFYUP thanks for the feedback:)
@kubik72033 жыл бұрын
@@CRF468R more like forced feedback pun intended
@laing0ian2 жыл бұрын
Seems semucube have stopped selling there boards for DIY builders... :(
@leonidarndt3 жыл бұрын
works with PS4?
@arsenvain Жыл бұрын
How much nm it can give?
@garlicbreadbeans6 ай бұрын
He says it in the video, 20nm small, 30nm large
@Masteroftee3 жыл бұрын
1000$ in that cost u can buy VRS wheel?
@Masteroftee3 жыл бұрын
And VRS is cost around 900euro
@seanmack92073 жыл бұрын
Think the internals of this being simucube puts it ahead though...
@menacegtr Жыл бұрын
I think i would like to have my thumbs renched right out of my hands. Just decided.
@SDF_Live4 жыл бұрын
Браво, вот он как оригинал должен был выглядеть, но жаль китаец переплюнул....
@MODIFYUP4 жыл бұрын
Спасибо за просмотр!
@danielauen77902 жыл бұрын
I cant afford this, I want it, but I cant afford it, so I think Ill just modify my driving force pro gt.
@jojosk8r3 жыл бұрын
Goodness me. Yellow for phase, black for earth? Only color-coding your heatshrink? There are countries in which that would land you in prison.
@dennisdecoene3 жыл бұрын
Great content, awful music. Thanks for sharing!
@xDEATHCLINCHx2 жыл бұрын
its cheaper to buy a simcube sport 2 vs this which would be like making a original simcube
@THESHADOW971392 жыл бұрын
no
@s550andrew2 жыл бұрын
Just drive in real life...
@MODIFYUP2 жыл бұрын
I do plenty of track work if you look at my other videos. A lot more than you do by the look of your channel (can hardly call a drag strip "driving". Maybe best to do your research before looking like a fool.
@s550andrew2 жыл бұрын
@@MODIFYUP I was kidding m8
@s550andrew2 жыл бұрын
@@MODIFYUP I have looked at ur channel and like ur content was just pulling ur left nut