How to build a Workshop Stool Adjustable (Plans available)

Plans to my projects
madebythemetalist.etsy.com
New Video Sheet roller: • How to build a DIY She...
My Welding Table: • Welding Table Build wi...
My Sheet Metal Bender Video: • DIY Sheet Metal Bender...
Planst the Workshop Stool: www.etsy.com/listing/13231839...
yes i built another workshop stool. But this time I built it with wheels because I often change my position at work. Two of the five castors have brakes.
Of course, it is also adjustable in height. And you can rotate the seat.
is now the third stool that i build in this direction and have never had any problems with it. It is also very light, which was also very important to me.

[@drikkku]

This is it!! No CNC cutting, no 3D printing, just real Handwork!!

[@TheMetalist]

Yes the old fashion way 😅 thank you

[@tstant2298]

作業台に装着出来るベンダー、素晴らしい！

[@repairtech9320]

We miss This Old Tony too. Thanks for the magic bit.

[@TheMetalist]

Thank you 😁 Yes awesome guy ...This old Tony

[@nickdubois8218]

Great work! Love the shout out to This Old Tony on the grinder chop!

[@TheMetalist]

Thank you Nick

[@mikestoudt899]

This would make a great welding project for my HS welding class. It uses so many great processes. The kids would learn a ton from this. Thank you

[@TheMetalist]

Awesome 💪😁

[@gk6993]

Amazing work. Such a joy to watch someone who knows what they're doing. Thank you for sharing.

[@vprojekte]

Gefällt mir! Durch deine Arbeiten sieht man immer sehr schön, wieviele Einzelteile und Schritte doch notwendig sind, um so etwas zu bauen. Ich erlebe das immer wieder, wenn Leute vorbei kommen und sagen: "Kannste nich mal eben...". Schweiße mir gerade aus Quadratedelstahlrohr meine Bulli-Einrichtung. Kann man zwar schon in einem Video sehen, dauert aber auch ewig. Bei deinen Videos kann man denken, dass das sehr schnell geht. Die Realität sieht aber anders aus ;) Danke für die Videos!

[@TheMetalist]

Vielen Dank 😊 ja solche Aussagen kenn ich oder z.B hast mir ein stück rohr = 3x2m 🤦🏻‍♂️ Manchmal wenn ich ein Projekt Filme wird der kleinste Arbeitsschritt zu einem Minuten langen Kampf weil die Einstellung zum Filmen nicht stimmt 😅

[@Wildomsize]

Moin Dirk, wieder ganz grosses Kino! Ich finde es beachtlich wieviel Arbeit und Energie du selbst für einen “einfachen” Werkstatthocker steckst! Ganz grosses Kino! Du solltest dich eher the perfectionist nennen 😉👌

[@TheMetalist]

😅Vielen Dank 😁

[@m.a.jr.689]

👍👍 an der art wie du etwas fertigst,und am Endergebnis sieht man dir dein talen an , eben ein Maestro 👏👏👏

[@TheMetalist]

Vielen Dank sowas höre ich natürlich gerne ... arbeite mit Metall aber auch schon mein ganzes Leben 😅

[@kshofat4]

You are such a perfectionist. It shows in your builds. Well organized shop. Top notch. Been waiting for some new videos too. Thank you.

[@TheMetalist]

Thank you 😁

[@grumpyone5963]

Great job as per normal. I need to get myself one of those new chopping grinders, very fast cutting!

[@homemadetools]

Nice little stool. We shared this video on our homemade tools forum this week 😎

[@trashes_to_treasures]

Cool! Next step: Feder ins untere Rohr einsetzen und automatisch hochfahren 😍

[@TheMetalist]

Ja hatte auch an eine gasdruckfeder gedacht vl mach ich einen Part zwei dafür 😁👍

[@michaausolfen]

Da zeigt sich der Profi👍👍🤣

[@paulp96275]

Fanbloodytastic work you are a very talented fabricator designer and a fantastic welder great 👍👨🏻‍🏭🇬🇧

[@TheMetalist]

Thanks Paul 😊

[@Lorbuverse]

Wie jedes Mal auch hier wieder beeindruckende Arbeit. Der Stuhl ist für die Ewigkeit gebaut und das mit einem handwerklichen Level, wo einem "normalen" Menschen einfach die Kinnlade runterfällt 😮 Bleibt nur anzumerken: Mehr davon 😀👍

[@TheMetalist]

Vielen Dank. Ich freu mich immer riesig über solche Kommentare. Arbeit mit Metall ja auch schon lange und die meisten Sachen sind ja tagesgeschäft für mich. Aber bei meinen Projekten lass ich mir dann doch immer etwas mehr Zeit 😅

[@keithviolette5870]

Great build. The solid steel ring at the base must make it nice and stable. I was expecting test drive at the end, perfect way to end it.

[@marcelknippers9591]

Außergewöhnlich magnifieke Arbeit. Bestimmt stärkste Qualität auf unserer Erde💪. Richtich genossen alle Details zu sehen. Kostet viel Arbeit und starkes Stahl, aber dann hat man auch etwas fürs ganze Leben. Gruß aus Holland.

[@paradisefalls37]

That’s some legit craftsmanship! Thank you for sharing!

[@RoadratEddie]

That's certainly better than what you can buy at Harbor Freight

[@TheMetalist]

I hope so😅 ...thank you 😁

[@davidallsup2375]

Ordering plans right now!

[@Fr3dd1321764]

Love watching you work.😄

[@TheMetalist]

Thank Fred 💪😁

[@Zarlax]

I’ve been wanting to do this forever and you just answered all the questions I had. I like the quick and fine adjustment options.

[@TheMetalist]

Awesome 😁

[@FlorianBeck_762]

Sehr geil 💪🏻 freu mich immer wieder auf neue Videos von dir 10/10 😎

[@TheMetalist]

Vielen Dank Flo 👊

[@jaca2995]

i like your all job , gl

[@nathanvince4728]

Love this video, so peaceful and relaxing.

[@patrickkirwin5832]

LOL love the grinder wheel hammer... made me laugh.

[@harmlesscreationsofthegree1248]

Super cool, you always impress me with the quality of design and execution. And you video production skills are on point as well 🙂

[@TheMetalist]

Thanks a lot 😁😁😁

[@michaelrosenlof1084]

Another great job, always well done ✅👍

[@TheMetalist]

Thanks Michael😁

[@AshishAshish-cq1lw]

Good job 👏👍👌

[@TheMetalist]

Thank you Ashish😊

[@patricksalmon3494]

Super tabouret réglable en hauteur. Magnifique travail

[@TheMetalist]

Thanks Patrick 😊

[@tungstengrinder9485]

NÖ NÖ NÖ is mir zu hart 🤔ein gasdäpfer federt ( dämpft )so schön wenn man sich drauf schmeisst 😉😂 und da nur unten die plasteschei s s s se weg 😉

[@RJB510]

Great job! Now just swap out those regular hex nuts for nice domed nuts and cover the seat base in a bit of foam and leather it'll look 👌

[@TheMetalist]

Thank you 😁 Yes, right but had none there😅

[@mftmachining]

Grundsolide Arbeit, so muss es sein. Stark.

[@TheMetalist]

Dankeschön 😁

[@markoheimburger9895]

Super Video ,sehr robust und funktionell dieser Hocker👍😁

[@TheMetalist]

Dankeschön 😊

[@jorgbrinker5868]

Moin Dirk, Klasse Projekt! Super umgesetzt, Mega stabil! Liebe Grüße aus Ostfriesland 👍🤩👍

[@TheMetalist]

Hi Jörg, vielen Dank 😊 Grüße aus dem Schwarzwald

[@rolfnilsen6385]

Neat! But that ring roller of yours was really nice.

[@TheMetalist]

Thank Rolf 💪😊

[@tomfull6637]

Keep the filler rod under the gas shield as it cools and you’ll get better welds! 😉

[@helmutk.2583]

Wieder ein professionelles Projekt. Den ersten Hocker hatte ich mir nachgebaut und einen kleinen Konstruktionsfehler festgestellt. Wenn der Hocker auf der fast niedrigsten Position eingestellt wird, kann man den Griff zum Feststellen, wegen der Holzplatte, nicht mehr festdrehen. Ich habe den T-Griff dann gegen ein Sterngriff ausgetauscht, jetzt passt es.

[@TheMetalist]

Hi Helmut vielen Dank. Ja das ist sehr knapp da unten 😅

[@DeddyJingga]

Cool hammer ❤❤❤

[@1440PGamingContent]

You should create a store

[@iainhetherington4608]

Love your style dude, keep it up great viewing Cheers from Aus

[@TheMetalist]

Thank you 👋😊

[@jirawad]

Nice job.

[@Terminal-Thought-Experiment]

Subscribed.

[@joell439]

weeeeeee 👍👍😎👍👍 Thanks for another inspiring build!

[@TheMetalist]

Hi Joel you are welcome 😁

[@ektaron]

You had me on that snap off pieces from a 10 mm metal plate with an abrading disc mounted on an angle grinder. 😂

[@TheMetalist]

💪😁

[@juanlopezcuspinera1010]

Te quedo muy padre, felicidades

[@iurii-wind]

Огонь! Молодец. 👍🤝🇷🇺

[@josepena7292]

Muy bueno

[@samiam7]

I was surprised you didn't make the wood part into two oversized hands. So that you're setting on the palms

[@TheMetalist]

Next time 😂 awesome idea

[@DrMrSmooth]

Nice video collegue ! Keep going ! 👍

[@TheMetalist]

Thank you 😁

[@DrMrSmooth]

@@TheMetalist ❤️💪

[@timberframe4646]

Great job!!

[@TheMetalist]

Thank you 😁

[@pameladunn7346]

SHOW OFF ... and i like it 😀

[@TheMetalist]

Thank you Pamela 😅

[@sniper31013]

good job mash'Allah

[@thomasmuller6838]

Super, Super gut,bin total begeistert. Hättest du dazu auch die Maße?

[@BallTripper]

You should ask The Upholstryist to put some padding on it.

[@TheMetalist]

Yes i thought about it 😁

[@africaland506]

Very nice! & Well done! Could u give us messure of all tubes?

[@TheMetalist]

Thank you 😁 plans with part list is in the Video descripion

[@williamlanphar630]

Nice.

[@holgerklein9706]

Top , 1A , 👍🇩🇪

[@TheMetalist]

Danke Holger 😁

[@remizik]

Amazing. Instant sub :)

[@TheMetalist]

Thank you

[@marvinmarlin9655]

Brilliant build Dirk, makes me want to consign my Mark 1 stool to the bin and build one. Trouble is I’m still trying to finish your workbench clamp set.😂

[@TheMetalist]

Thank you 😁 one project after another one 😅

[@Jimmy_McGinty]

Super Hocker. Aber wo ist nur die Rauchabsaug-Kobra hin? 🤔

[@TheMetalist]

Vielen Dank. Ehrlich gesagt hatte ich so total vergessen 😅

[@jesusmarte1880]

nice

[@michaelkunze927]

As someone who had one of these break off at the shock and injured my tailbone and blew out a lumbar disc I am really cringing on all of the butt welds. Especially on the seat mount. I would have countersunk the bolt into the mount for more reliable hold.

[@M_to_the_T]

Warum kommt der mir so bekannt vor 😯 Edit: 11:11 aaah ok 😁😅

[@brainsironically]

Your welds are ridiculous: I couldn't draw a straight line, using a ruler, and have it come out as nice as your welds. Awesome build!

[@TheMetalist]

Thank you Brain 😊

[@peterpreston9871]

Hi there great set up you have, and great videos easy follow and excellent content. Also great skills. Like all you pronects. How do i obtain plans...looking to start with your stools. Cheers.

[@andreas5053]

Hi super video. Kannst du mir sagen was für ein wig schweißgerät du benutzt und was für ein schlauchpaket. Danke Gruß Andi

[@TheMetalist]

Hi Andi, Ich schweißen mit dem Rehm Tiger AcDc 230 Der Brenner ist ein ck worldwide flexloc den bekommst du am besten über EWSgmbh.com Grüße

[@2bParagon]

awesome video, may I ask what type and grit of sanding roll is on your belt sander? looks like it does a good job af shaping and leaving the material smooth.

[@stefanvalchev8066]

i saw sit is not parallel to the floor.You messed something :0

[@pameladunn7346]

can you give information on the metal clamp you used - for holding the pinch ring (for seat post) ... thank you

[@TheMetalist]

Which min/sec?

[@thomasmuller6838]

Sorry, hab den Link für den Bauplan nicht gesehen.

[@IZ2JQEHAMRADIO]

Hi Dirk, since I subscribed to your channel, I admire your construction techniques and the solutions you share from time to time. In some videos I identified the brand of the TIG - REHM welding machine: do you use a specific online shop for the purchase or can you find it in the area? And again, sorry....is the trigger pedal or lift? Thank you very much!! :) Greetings also to your subscribers

[@mirohu10]

Hammer! Schweisst Du lieber mit fusspedal oder mit brennertaster?

[@TheMetalist]

Hi Miro, Fusspedal 😁

[@FixitFred]

What is the thick orange grinding wheel you use. Looks very effective for removing mill scale and grinding edges

[@TheMetalist]

Yes its very good to grind off the millscale. It's from Norton - Blazer

[@mccafferycustoms5091]

What kind of bandsaw do you use? Looks like it can swivel and make mitered cuts

[@Greatgaming26]

Do you have a list of tools you use or maybe links or buy them like what you use to scribe lines or To mark things I see you use a specific tool to mark edges at 3:41 like what’s that?

[@TheMetalist]

Hi a list from the tool i don't have at the moment. The mesuring gauge will be soon for sale 😊 just stai tuned

[@carmineriganti2333]

Where did you get that chopping disk grinder from? I want one LOL

[@TheMetalist]

😅👍

[@freshpootube]

What size electrode and cup do you use for your square tube builds? I've been using a 6 cup and 2.4mm elctrode and I wondered if it was too big, or maybe my cup is too small?

[@TheMetalist]

I use for regular steel a cup 6 to 8 most of the time 8. And also a 2.4 electrode

[@DiyWorker]

hi good job, what is the model of your welding machine ? on your link there are several models ! Thank you

[@TheMetalist]

Its the Tiget AcDc 230 ultra

[@DiyWorker]

@@TheMetalist thank you bro

[@aremolund]

what is the angle grinder disc you use?

[@TheMetalist]

The flapdisc?

[@jpsimon206]

This young Tony?

[@TheMetalist]

Love it😅😁

[@rowanwiegel4695]

This smol Tony

[@marshallalvaro3334]

💃 pքɾօʍօʂʍ