Рет қаралды 32,673
This is my BigBoy Miner, the Drill Orientation is 7 Blocks between each laser laterally, and 5 blocks vertically, for a total of 8 Laser drills, Limits conforming. I use a Base starter block as an alignment reference and Line up exactly on a North South, or East West Axis. I'm using Shift-Laser in the HV for a uniformly flat ground surface. The first HV run is done flat against the starter block, lower yourself completely against it. The next run I raise my top row of lasers 6 blocks higher, I re-align on my base block, and then I Raise my hover 0.5 Meters above the base block, this makes a perfect square for a 9x5 Hangar door. Later youll see me using Alignment blocks to cut Rooms into the walls with my "Omni laser", the alignment blocks assure that the frame for the windows will have a nice fit against the stone. I usually freehand this base type, but as a guide I practiced using these alignment blocks so others would have an easier guide & frame of reference for spacing.