How to change ball joints on a 2002 Dodge Ram 1500

#paid link
moog ball joint:
amzn.to/4a7gpdE

[@Shiznaft1]

Camera work is excellent! Very useful and professional delivery. This job is hard enough without having to worry about the production value, I for one appreciate all the hard work. Thank you.

[@s33therfan]

Thank you very much!

[@phillipfritz7014]

Best camera work I've seen on any of the ball joint videos nice work. Takes a lot of mussel, patience, time and ingenuity if you don't own two thousand plus dollars in shop tools...worked out nicely.

[@s33therfan]

Thank you very much for the feedback and thanks for watching.

[@vicquin970]

Excellent job! Realistic! These things are very stubborn to remove. I'll be dong the same thing soon. This video is excellent advice. Thank you. I would have replaced that upper control arm too but you can do that later on, not having to disassemble everything one more time.

[@s33therfan]

Thank you for the great feedback.

[@Powerstroke431]

Awesome video, very informative. Redoing the front end on my 03 1500 ST rwd and your video covers everything anyone could need to know. THANK YOU SIR :)

[@s33therfan]

Greatly appreciate the terrrific feedback. I really like to show the good and the bad so everyone knows what to expect. Thank you for watching.

[@AngelMiguel3280]

Thanks for your help…. God bless you!!!

[@s33therfan]

Thank you for the kind words , and God bless as well.

[@voceteo8154]

Thanks for your help brother nice video

[@s33therfan]

Happy to help , thank you for the feedback.

[@user-dt2eg3fj6v]

Nice video helped out a lot 👍

[@s33therfan]

Glad to hear! Thank you for the feedback.

[@slow_cloud547]

Great video, thanks for the informative video.

[@s33therfan]

Glad you enjoyed it! Thanks for the great feedback.

[@adrpals2324]

Good job but that upper control arm, also needs replacing.

[@327JohnnySS]

Good job, great video. 👍

[@s33therfan]

Thank you! 👍

[@327JohnnySS]

@@s33therfan Your welcome. I only had access to a common ball joint press kit. And after a few attempts with the large cup it kept flying off which was sketchy while trying to remove. I filed the 4 tabs and wire brushed away the debris and added some pb blaster. Then I started to hit the top of the ball joint with a jack stand under the control arm with a short handle sledge. Once it started moving I added a short impact socket and in 4 wacks it was out. Those things are a tight fit. I can see why many of these types of trucks are still going strong as they are tuffly built.

[@tankarian1987]

excellent video !!!!!!!!

[@s33therfan]

Many thanks!

[@kennethperian4370]

Great job showing and telling, keep up the good work see ya next time see ya bye.

[@s33therfan]

Thank you very much.

[@jameschandler3402]

Very good job

[@s33therfan]

Thank you so much

[@shouldihangmyself]

Very cool dude 👍

[@s33therfan]

Thank you

[@shouldihangmyself]

How did you reset the pistons on brakes

[@josephdossantos9274]

That Upper Arm should be replaced. The ball joint is completely destroyed. Why do that kind of work and not replace the Upper Arm. Great video footage.

[@Kingonionring200]

You can press the lower ball joint out with the exact press from autozone he has without using a file and if yours is stuck one won’t pop out and you tried everything grab a sawzall you can come in from the front there’s a big wide hole like 2 inches tall by 5 inches wide you have a clear shot with a sawzall to cut the middle of the lower ball joint in half so the knuckle drops with the lower portion of the ball joint in it and the top stays in the lower control arm then use the press to press both half’s out very easily

[@marionoguez1041]

Excelente, excelente, excelente ,

[@s33therfan]

Thank you very much.

[@daviddenson3324]

Wonderful video that will help when I do this but why didn't you replace the upper ball joints while you were already in there?? Not only that but replace the wheel bearings at that time too

[@s33therfan]

I did not have the parts for the upper at the time , and decided I would use the opportunity to film another step by step. The wheel bearings had actually been replaced a few years back. I appreciate your feedback and thank you for watching.

[@dayslife]

👀👍🏻nice!

[@s33therfan]

Thank you as always.

[@Legend3216]

Thanks for the very informative video. I'm planning on replacing mine this weekend. Is this a 4x4 by chance? Mines an '02 1500 4x4 5.9L

[@s33therfan]

This is 2wd with the 4.7l engine , thanks for watching.

[@n.elliott9122]

Do you feel the truck had soft suspension and bottomed out fairly easy? Have a factory, rough ride? I ask because I bought a 2003 Laramie which was a California truck with original shocks. Only rode smooth on smooth roads. Replaced original suspension with koni str.t, and it still rides rough. Wondering if my next move is a variable front coil and rear spring assist. Thanks.

[@s33therfan]

Now that you mention it yes . After replacing the front struts it seemed to be not as noticeable. Thanks for the feedback.

[@jimenezalberto3628]

My opinion, do you make good job bud? Why do you now remplace up control arm

[@MsJhook]

Air hammer to the knuckle

[@user-ux5fm8si4o]

What about the grease boot on the new lower

[@user-ln9mj7tn8l]

Why are not using air to pull the ball joint up?.

[@smbmx6581]

The upper ball joint is just as bad as the lower one.

[@user-om4zo7hf9t]

Now how long did that take to do

[@s33therfan]

I would say atleast 2 hours per side . Thanks for watching.

[@user-om4zo7hf9t]

Okay, thand keep up the great videos, man. They help out a lot

[@franciscovaldez775]

Your not supposed to hit the ball joint to take it out your supposed to tap the side of the knuckle next to the ball joint

[@gusf8451]

did you have to grease that Moog ball joint after installing? thanks

[@s33therfan]

I did add a tiny amount , I am always afraid to add too much because risk of messing up the rubber boot. Most will come with some grease. Thank you for the feedback.

[@327JohnnySS]

Gus always add a little. If you have your oil changed at a shop always mention that you have had the ball joint and tie rod ends replaced with ones with serviceable grease/zerk fittings.

[@sspeedy2859]

You should be hitting the steering knuckle not the ball joint.

[@josephdossantos9274]

The Dodge Service Shop Manual states to never hit the Knuckle to remove the ball joints. Even then mechanics developed their own way, it doesn’t make it right.

[@josephdossantos9274]

For some comments about hitting the steering knuckle to remove the ball joints, the Dodge Service Shop Manual states to Avoid Hitting the knuckle. That several mechanics developed their own way to remove the ball joints, it doesn’t make it right. Use the right tools for the right job.

[@christophersilmon8073]

🥇💯🦾👌

[@s33therfan]

Thank you very much.

[@brinfuscrear6111]

I will agree with they all looks bad

[@brinfuscrear6111]

Are you serious you putting that back and hadn't changed out the top ball joints and out tie rod end that don't look good😮

[@Kiddro22]

Inflation has alot of ppl on a very tight budget