How to change front suspension arm / front control arm on SKODA FABIA (6Y5) [TUTORIAL AUTODOC]

[@autodocuk]

Attention! This video contains mistakes: 4:24 - the tightening torque is 20 Nm, not 45 Nm. 4:55 - the tightening torque is 70 Nm, not 74 Nm. We're sorry for the inconvenience 🙇‍♂

[@edgarzakarian1649]

Less music, more repair sounds. Great video! Please keep them coming. Very educational.

[@autodocuk]

Thank you for your feedback! We appreciate your attention to the details. Our experts will look into it. Stay tuned for more videos in the days ahead. Best regards, Autodoc team!

[@paulpaul9914]

Is spraying copper grease onto a brake disk not advisable? Should the bolt tightening sequence involve a torque setting operation followed by an angle tightening operation?

[@7Toki777]

Hi! What is the correct lifting height of the arm? Thank you!

[@autodocuk]

Have a look at other videos on our channel: 🔸 SKODA FABIA 6Y car repair tutorial - kzbin.info/aero/PLWep5LzT0sxl4eEmoXU3VN9Wn_3hKbqj4 🔸 How to replace pollen filter / cabin filter on SKODA FABIA 1 (6Y5) - kzbin.info/www/bejne/moeVZIKweLB_n6c 🔸 How to replace air filter on SKODA FABIA 1 (6Y5) - kzbin.info/www/bejne/qnPVmWOnl7V9iq8 🔸 How to replace oil filter and engine oil on SKODA FABIA 1 (6Y5) - kzbin.info/www/bejne/g6aYdmmrdpeni7M 🔸 How to replace spark plug on SKODA FABIA 1 (6Y5) - kzbin.info/www/bejne/Z2Syp5egjKqVp9E

[@ReggieChas]

Thanks for the video. Could replacing just the lower arm bushes affect the tracking/put the steering wheel out of alignment?

[@autodocuk]

Thank you for your comment. At any case, when replacing the sleeve bushings, you will need to dismantle the lever itself, which will significantly affect the settings for the camber. Best Regards, Autodoc team.

[@lisihoxha7388]

Hello my there my friends I am gone change front suspesion arm In SKODA FABIA 1.2 12V 2006 this weekend but i the right side I have a big screw and I cant remove because near is olje´- rezervuar can i lift tha car by a little without removing a screw in mounting some hold the motor .... thnx a million for video

[@autodocuk]

Thank you for your comment! Unfortunately, we do not have such information, you can find a detailed manual in the service book of your car. Best Regards, Autodoc team

[@tjteknik1]

Basically the same instructions for the Polo III 6N2, regarding the need to lift the engine a little bit to remove the front screw for the suspension arm.

[@autodocuk]

We cannot tell you for sure. You can find this information in the technical documentation for repairing your car.

[@tjteknik1]

@@autodocuk I just did this procedure the other day - a lift of the engine just a cm is needed but very easy to do 👍

[@loicsilva6567]

Hi Autodoc, when can we see a series on the Lexus Rx400h?

[@autodocuk]

Unfortunately, we can’t answer right now whether we will have such a video. Stay tuned for updates on our channel! Best regards, Autodoc!

[@loicsilva6567]

@@autodocuk Thank you for replying. We'll be looking for it.

[@alexey9900]

Good 👍👍👍

[@autodocuk]

Thank you for your nice feedback.We are happy to know that you like our videos.Please stay tubed with us.Best regards, Autodoc!

[@lisaqueenblinks]

Kya hai price

[@autodocuk]

We do not have such information and we recommend you to consult mechanic.

[@nawabnawab3195]

good luck

[@stewasb]

Did I really just see you tell people to jack up and support engine by the sump lol wow.

[@4xHitler]

tone down that stupid industrial sound. we wanna hear him repair not some bad music