How to change Front wheel bearing on AUDI A4 B7 AVANT TUTORIAL | AUTODOC

[@andrew19682008]

Good informative video! People criticising the procedure forget he's done all this effortlessly with the right tools. Would have taken me that long to get the wheel and caliper off! 😂👍

[@r3mark]

Who cares about torque specifcations? Not this guy ;) Another thing; why remove the whole thing from the car? You can easily remove the drive shafts on these cars, getting access to the 4 bolt at the back of the hub carrier, without hasseling with the famous bolt at the top. Also I would press the hub onto the bearing before mounting the bearing to the hub carrier. But that's just me ;)

[@autodocuk]

Thank you for the feedback! We are glad that our tutorial was helpful for you. Your opinion and remarks are very important for us. We will take them into consideration for our next tutorial. Best regards, Autodoc.

[@MrSqueakinator]

Ya this is way overboard to change a wheel bearing.

[@greasystrangler6250]

I need to replace my wheel bearing in my car. Figured I'd check KZbin for how to do it, and after seeing this, I was thinking there's no way it's this involved. Went on the Audizine forums, and they suggested taking off the axle shaft as you mentioned. I expect this shown method is the Audi way, so you can inspect all the control arms while you're at it.

[@adamknight9535]

are the rears the same as the front ie bearings and flanges?

[@adamknight9535]

thanks for the vid I've done my front bearing now but quick question are the rears the same as the front ie bearings and flanges? B7 RS4

[@robertficek7586]

The rs4 and s4 use bolted hubs, a4 uses press fit style in the rear, if you have aluminum knuckles its always bolted, you cant use press fit bearings in aluminum.

[@josephoconner]

Credit too you so simple and understanding explanation how to do it👏 👌

[@martinjp1]

Bullshit! those upper control arm pinch bolts never come out that easy.

[@jameswan670]

I agree!! But we can just refer the way how to do it!

[@Phaxmohdem]

22:48 subtle "artwork" on the inside of the rim there. This tutorial was great for me actually. I need to take the whole knuckle off to try and hammer/drill/curse out the remnant 80% of that stupid pinch bolt which snapped off on me.

[@autodocuk]

Thank you for your comment! We are happy to know our tutorial was useful for you. Good luck with your repair! Best Regards, Autodoc Team

[@jimschmidt4256]

Triple square at 8:45 mark, not Torx.

[@jimschmidt4256]

Also - missing the socket size used to remove the hub. (I used 30mm)

[@jimschmidt4256]

At 9:30 mark, my bearing was highly corroded and required a press and incredible force to remove.

[@autodocuk]

Thank you for the feedback!This video is considered to be an informative one, and it is approximate. Best regards, Autodoc.

[@jimschmidt4256]

Fair enough, but the Torx will strip a difficult triple square, leaving your viewer in a bind.

[@autodocuk]

Thank you for the feedback! Your opinion and remarks are very important for us. We will take them into consideration for our next tutorial. Best regards, Autodoc.

[@timothybryce5239]

Special grease. Is that Bosch superfit?

[@67bmw1600]

GREAT TUTORIAL!!! A few questions....... Is it suitable to use the "blue" thread lock or should I use "red"? Also, I noticed in most cases you re-used the same bolts. When you re-use, should thread lock be applied anywhere besides the wheel bearing and brake caliper bolts? Lastly, what did you spray on the wheel hub at 18:11?

[@autodocuk]

Thank you for the feedback!The color of the lubricant in this case is not principled, the main thing is that it must comply with temperature and other technical regulations. Regarding the re-use of bolts, you are absolutely right, in practice, only new fasteners should be used, but this video is purely informative therefore some stages of the repairs might have been excluded. Stay tuned and follow our latest updates. Best regards, Autodoc

[@kamalhussein80]

I do it without removing anything , only slide the cv axel 5 cm back , you can access the screw .

[@autodocuk]

Our videos are for guidance only. All routine replacements and values can be found directly in the technical documentation for your car or use the help of the auto maintenance service. AUTODOC

[@webermp]

Anyone know what the "special grease" is and how necessary it is?

[@autodocuk]

Thank you for your comment! Could you please specify the grease in question? Best Regards, Autodoc Team

[@webermp]

autodoc.co.uk the grease at 9:57. “Lubricate the wheel hub with special grease.”

[@aaroncalgary]

6:42. Yeah, that bolt broke. Slowed everything down quite a bit.

[@autodocuk]

Thank you for the feedback! when the thread breaks, or the bolt breaks, this makes the process more complicated. Best regards, Autodoc

[@odirvonhauser805]

lol that was sarcastic, the tech removed it like a breeze

[@madsen151099]

have same problem, how did you got the bolt out? :/

[@tomlawson5893]

Yup, video isn't realistic of an average car at all. That car has definitely been taken apart, put back together and then video made after

[@JC-io8pv]

need to ask...what brand names tools are you using ? any link towards it.

[@autodocuk]

Thank you for the feedback! Unfortunately we don't have such an information. Our mechanic keeps this in a secret:) Best Regards, Autodoc.

[@k2kkoos]

would this same procedure work for an A5 (dec 2009) sports back 2.0TDI?

[@autodocuk]

Thank you for the feedback! To give you an answer, we need to know more information about your car and its configuration. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@TeravaSanok]

Superb technique and mechanical aptitude / dexterity ... where can one get these type of assembly gloves (?)

[@autodocuk]

Thank you for the feedback! All special gear can be purchased in a special shop. Best regards, Autodoc.

[@wolverex]

I see he's been fixing the karts his brother Mario drives

[@CariDK]

which nr of that tools is it used ? is it CrV 10 or 12mm ?

[@autodocuk]

Thank you for the feedback! You can look up the instrument size in the technical documentation on the vehicle maintenance or get it from the official car dealer. Best regards, Autodoc.

[@harold4thofhisname.499]

holy shit i wish i had air tools

[@audigang6174]

I SEE YOU LUIGI

[@buddhudd1054]

Is that a chrome socket on impact gun?? Oh NO oh no

[@autodocuk]

Thank you for the feedback! Thank you for the interest in our channel. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@autodocuk]

Thank you for the feedback! All these procedures should be carried out. Best Regards, Autodoc.

[@lucoche]

thanks to the mastercraft lifetime warranty :P

[@jonasthemovie]

autodoc.co.uk These replies are almost as good as the customer service when you have sent the wrong parts.

[@alexeiix]

You bang aluminium whit still hammer???you have to fired this guy really.

[@mysteryshopper7296]

Everything behind the wheel bearing needed to be dismantled, really? Including the engine and power windows😂

[@autodocuk]

Thank you for your comment! It does look a bit complicated, however, we have used the replacement sequence that is recommended by the manufacturer of the vehicle. Best Regards, Autodoc team!

[@torsteinkristiansen2980]

Bra