How to change rear brake discs and rear brake pads on VOLVO XC90 1 TUTORIAL | AUTODOC

How to change Rear brake discs / Rear brake rotors / Rear Disc Brakes / rear brake pads on VOLVO XC90 1 TUTORIAL | AUTODOC
Top brands that produce brake discs and brake pads: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
On our website you will find a wide range of auto parts you are interested in: goo.gl/H6xMP2
Brake discs: goo.gl/Up7ozR
Brake discs for VOLVO: goo.gl/bjUPmD
Brake discs for VOLVO XC90 1: goo.gl/qWtpkG
Brake pads: goo.gl/TunPpb
Brake pads for VOLVO: goo.gl/APFzMq
Brake pads for VOLVO XC90 1: goo.gl/JWYYR2
VOLVO Car parts: goo.gl/QxxY6p
Mobile Shop: m.autodoc.co.uk
► How to replace engine air filter on VOLVO XC90 1 - • How to change Air Filt...
► How to replace a front ball joint VOLVO XC90 1 - • How to change a front ...
► How to replace front wiper blades on VOLVO XC90 1 - • How to change front wi...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZbin: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.c...
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.c...
❱❱ Install the AUTODOC CLUB App - club.onelink.m...

[@scottkelly4973]

That was one of the best tutorials I have ever seen! Clear and concise. Great job!

[@autodocuk]

Thank you for the feedback! It inspires us to make more videos! Follow our upcoming updates. Best regards, Autodoc.

[@xopenex]

By far one of the best videos on this. Half the time people are talking way to much and not showing how to actually do it. 👍

[@autodocuk]

Thank you for your feedback! We are glad to know this tutorials was useful to you. Stay tuned for more! Best regards, Autodoc!

[@wrdominicas]

great video shows the right tools for the job thank you

[@alecsithong]

Great video. Before I pressed the piston back, I opened the brake reservoir lid, pressed the piston back, reassembled everything and then put the reservoir lid back on. I pressed the brake pedal several times and then drove it. It's fine however the pressure on the pedal is not as strong as it was. What can I do to fix without bleeding the hoses which I didn't need to do?

[@autodocuk]

Thank you for the feedback! If you have any difficulties, we recommend that you go to the Service station , where specialists with professional equipment will solve this problem much easier.Best regards, Autodoc.

[@michaelmorris6575]

Great video. Thank you

[@autodocuk]

Thank you for the feedback! We are glad that our video tutorials are helpful for you. Best regards, Autodoc.

[@josspadilla6093]

Thanks helps a lot!

[@autodocuk]

Thanks for your positive comment! Stay with us!

[@alexportiiii6414]

Is it a good idea to let the caliper hang by the hose? I always use a bungee cord.... Great vid

[@autodocuk]

All our videos are for informational purposes only. Any order of "convenience tricks" can be used when replacing. AUTODOC

[@micheljones4970]

Great video. Well done 👏.

[@autodocuk]

Thank you for your feedback! We are glad to know this tutorial was useful to you. Stay tuned for more! Best regards, Autodoc team!

[@gennadiyfriedman9741]

Great video. I struggled today trying to remove both caliper bolts but the space was so small that I could not get into it using 7mm hax 3/8 drive socket. Instead I can use the way you showed in the video - so much easier! All I have seen so far is 7mm hax with round driver head for 3/8 but I need the one you showed in the video. What's the exact name of the one you use please? Many thanks!!!!

[@autodocuk]

Thank you for your feedback! We are glad to know that you like our videos and we recommend Be sure to subscribe to our channel and watch our news! Best regards, Autodoc!

[@jacobkuca7711]

​@@autodocuk Don't pretend that you're actually reading the comments, because you're completely ignoring the questions that are asked. Gennadly, it's a 13mm combination wrench I believe.

[@VictorRodriguez-vt1gy]

great tutorial tks

[@autodocuk]

Thank you for your feedback! We are glad to know this tutorials was useful to you. Stay tuned for more! Best regards, Autodoc team!

[@alexmakowski9620]

He made a big mistake by letting the brake caliper hang by the rubber brake line. That is dangerous and could damage the brake line. The proper method is to hang the caliper by a bungee cord. Never let a brake caliper hang by the brake line as shown in this video.

[@autodocuk]

Thank you for the feedback!Your opinion and remarks are very important for us. We will take them into consideration for our next tutorial. Best regards, Autodoc.

[@nicke2307]

Euro vehicles use ultra lightweight calipers so no damage is going to be done. But what he was sloppy with was no greasing the slide pins or the brake pad ears to ensure smooth braking

[@saravaughan7020]

Always remove the brake fluid reservoir filler cap and leave of until the the of this job, new disks and pads are thicker than the old, the brake reservoir fluid level will rise.

[@autodocuk]

We are sure that your comment will be useful for many of our viewers.

[@ninetwiceorganicclientattr9574]

Does the piston need to be rotated as well as compressed back into the caliper?

[@autodocuk]

Thank you for your feedback! Thats right, To install a caliper for new shoes, the piston must be pressed back into the caliper a special tool as shown in the video. Rotate the piston during installation is not necessary. Best regards, Autodoc.

[@gtshelby8937]

I have a question.My car is 2013 model volvo XC90,Im not sure that the way to change brake disc is the same or not，cuz the car in video is 2008 model。。。

[@autodocuk]

Thank you for your feedback! Yes, Basically this procedure is similar. It could be difficulties with caliper differences and its caliper adapter brackets. Best regards, Autodoc.

[@Cantinatollo1]

Is the #7 end bit a star bit? Does #7 mean 7 millimeter metric? Where can I buy this tool?

[@autodocuk]

No, it's not a star bit, it is a usual hexagon head. Yes, the #7 means 7 millimeter metric. You can buy it in a car specialized store. Best regards, Autodoc.

[@jmanajr]

Why would you let the caliper hang like that??

[@autodocuk]

Thank you for your comment! You are right, we made a mistake and fixed it in the new videos. Best regards, Autodoc team

[@Callemout997]

What year ? Was this Volvo

[@autodocuk]

Thank you for the feedback! This model Volvo is from the 2012 production. Best regards, Autodoc.

[@MagicWandProductions]

I wish there were more written detail to go along with what the guy's doing, I was lost within the first 3 minutes of the video.

[@autodocuk]

Thank you for your feedback! We try to maje our videos as easy to watch as possible. Still, your remark will be taken into account as well. Best regards, Autodoc!

[@stefanslawecki8847]

W

[@bair9269]

Shouldn't the fasteners be tightened to torque specs? Should certain parts (like guiding pins and pads mating surfaces) be cleaned and greased? This looks like a professionally produced video, why not give professional advice?

[@autodocuk]

Thank you for the feedback! The video is informative and shows only the general principles of the constitution and the operation of the car and it is in no way to be taken as a manual for repair and maintenance. Best Regards, Autodoc

[@tonywillingham8109]

less music and more explanation.

[@jawoo0326]

Don't forget to release the parking brake before attempting to remove the rotor. Otherwise it will NOT come off the hub, and you'll spend an hour beating it with a hammer and cussing. Ask me how I know.

[@autodocuk]

We are sure that your comment will be useful to many of our viewers.

[@hhoward14]

DON'T NEED THE UN-INFORMING, BACKGROUND NOISE. Ordinary workshop sounds would have been good enough.

[@autodocuk]

Thank you for the feedback! The music can be turned off in the area below the video for your comfort.. Best regards, Autodoc.

[@czealtamahawk1228]

You're letting the caliper hang with its brake hose putting too much strain causing it to crack. Torque on caliper and bracket bolts? Dumb video.

[@autodocuk]

Thank you for your feedback! We agree that this is a huge mistake, the caliper should be hung with a hook that would not damage the brake hose, in new videos we have already corrected this error. Best Regards, Autodoc Team!

[@autodocuk]

Thank you for your feedback! We agree that this is a gross mistake, the caliper should be hung with a hook so as not to damage the brake hose, in the new videos we will definitely show it. Best regards, Autodoc team!

[@czealtamahawk1228]

Torque specs on hex and 13mm pls?