How to change suspension lower arm on MERCEDES-BENZ C W203 TUTORIAL | AUTODOC

[@autodocuk]

00:42 - Use a socket №22 00:59 - Use a socket №17 01:25 - Use a socket №10 and an open-end wrench №10 02:00 - Use a socket №E12 02:45 - Use a wrench № 21 and a spanner № 21 03:25 - Use a socket № 22 and a torx bit № 7 04:11 - Use a socket №19 05:32 - Remove the ball joint with a special puller On our website you will find a wide range of auto parts you are interested in: goo.gl/esvxzj Steering Links : goo.gl/KnKmtp Steering Links for MERCEDES-BENZ: goo.gl/zry8XD Steering Links for MERCEDES-BENZ C W203 : goo.gl/7FNv8b MERCEDES-BENZ Car parts : goo.gl/9NBr5D Have a look at other videos on our channel: ► MERCEDES-BENZ C W203 car repair tutorial | Step-by-step video guide - kzbin.info?list... ► How to replace front shock absorbers and springs on MERCEDES-BENZ C W203 TUTOTIAL | AUTODOC - kzbin.info/www/bejne/aGWXd3uYhtBkZ8k ► How to replace rear brake pads on MERCEDES-BENZ C W203 TUTOTIAL | AUTODOC - kzbin.info/www/bejne/Z6Kpi6qmbdyKhaM

[@SR1Records]

Doing this job later along with the front rear control arm. Watched this video about 10 times now. Feeling pretty confidant now to tackle it! Thanks for the tutorial!

[@ernestthomas5281]

At last no talking just doing the job Perfect .

[@ricardinhofonzie5949]

Just the best video illustrating a w203 service. Thank you so much for your effort and posting.

[@autodocuk]

Thanks for your positive comment! Stay with us!

[@farradaghajanian9846]

Excellent video, thanks so much 🙏

[@markaltosmith7871]

Video was bang on. could you do one for the upper thrust arm please

[@autodocuk]

We recommend you to have a look at the list of videos about MERCEDES-BENZ C W203 here: kzbin.info/aero/PLWep5LzT0sxm6eVaAWa7UqJCM9G7XRFJP

[@robertsantiago7855]

Great video, simple, clear visual, and specific.

[@autodocuk]

Thank you for the feedback! Thank you for the interest in our channel. Stay tuned and follow our latest updates. Best regards, Autodoc.

[@jorgeconj]

How do I know I reached ride hight with the jack to torque the arm bolt back? Great video. I have used many of your videos before to fix my 203.

[@autodocuk]

Before starting work, when the car is still on wheels, you can measure the distance from the center of the wheel to the wheel arch on the wing.

[@themitch1973]

Great video really clear angles. You show the proper sequence of doing it which is 95% the main hassle if u have not done it before. The other 5% is usual removing/fitting bolts, parts etc. Saved me a small fortune seeing the correc sequence of doing it. Thank you ! :) Whats the chances of showing a video removing the DPF and replacing the engine core plug above it ? Its a common one on the W03s for leaking and needing replaced.

[@autodocuk]

Thank you for your feedback! We appreciate your nice comment, it is very important to us. You are absolutely right that there may be difficulties in car parts replacement and that the dismantling takes most of the procedure time. Watch out for our upgrades. Be sure that the video you are interested in will appear .Best regards, Autodoc.

[@wilsonk]

Good sharing

[@SR1Records]

at 1:31 what is being removed with the 10mm nut? I don't have that black plastic piece on my car...

[@autodocuk]

Perhaps your design of car does not have automatic sensors for adjusting the height of the headlights.

[@SR1Records]

@@autodocuk That would be it. Thank you

[@sundeepjos]

Why is it called the upper lower arm?

[@Kielyn123]

Superb video and visuals of where to disconnect and mount. What was your rule of measure to determine how much jack pressure to put on the suspension to simulate the control arm under weight before torqueing it down?

[@autodocuk]

Thank you for your feedback! We are happy that you like our video. Before lifting the car, we just measured the distance from the wheel up to the edge of the wheel arch. After this , when doing control torquing, we just simulated the load under our own weight, having lifted the wheel up to the same distance. Best regards, Autodoc.

[@Kielyn123]

Thank you @@autodocuk

[@bilsan0885]

How much is the labour cost to replace suspension lower arms on both side?..and I didn’t see you using any torque wrench? 🤔

[@autodocuk]

We do not provide repair services and we recommend that you consult your mechanic. You are absolutely right and in practice it is required to use a torque wrench and observe the appropriate tightening torques.

[@luisavilez8842]

Very clear video, very good, only missing bushing retainers/covers. I will be doing this same job in my car in a few weeks, just waiting for the ball joint separator to arrive

[@autodocuk]

Thank you for your nice feedback! We are happy that our video appeared to be useful for you. Best regards, Autodoc.

[@markaltosmith7871]

Just change lower suspension arm on my mercedes clc 220 CDI 2008. Straight forward if you have a 21mm comp spanner & a ball joint splitter. I recommend SAS Universal Maintenance Spray Car Motorbike Penetrating Lube WD 500ml. put it on an hour before release.

[@azamatbezhan1653]

How many kilomtres arm lasts, i think 200 000 km, how do you yhink

[@robertjones7647]

What happened to the Torque specs. I didn't see any.

[@manny8566]

where can i find the torque specs for a 2009 C300 for the suspension components sway bars, upper lower control arms, tie rods etc... please help

[@autodocuk]

Thank you for your feedback ! You can learn this information from the Repair Manual for your car. Best regards, Autodoc.

[@johnh9200]

Look up Alex at LegitStreetCars on KZbin he has links to the genuine MB Spec Sheets which you can download for your specific car direct from MB for around $19.00 (Invaluable)

[@IT-TechExpert]

Awesome video, not sure if anyone caught this but, i think you didn’t torque the lock nut of the control arm? Looked as you might have missed that or the videonis cut…. Not otherwise great work mate!!!

[@autodocuk]

This moment was not captured on video. Thank you for your attentiveness.

[@muhammedamod1862]

Is there a specific direction to fit the big bolt? I was told its a camber bolt and has a marking on it facing north with indents on the east west sides in the actual thread on the bolt?

[@autodocuk]

Thank you for your comment. This bolt does not have an exact direction, we recommend contacting a service where you will adjust the wheel settings on the breakup stand. Best Regards, Autodoc team

[@Sasukeeeeez]

Video how to change the rear arm spring supoort?? Plsss

[@autodocuk]

We recommend to have a look at the playlist for MERCEDES-BENZ C (W203) here: kzbin.info/aero/PLWep5LzT0sxm6eVaAWa7UqJCM9G7XRFJP

[@leandro40428]

Hello; your videos are great; need help; I have a Mercedes w203 C320; when I step on the brake or start with it there is a rattling iron noise; it looks like a pile of loose iron beating under the car; when my car is in D-gear it also makes a valve-like or valve comander noise; does it have any connection with this loose iron noise hitting

[@autodocuk]

Thank you for your feedback! Unfortunately, it is not possible to unequivocally answer your question, there may be a lot of reasons, we recommend contacting the service for a complete diagnosis and identifying the cause of the problem. Best Regards, Autodoc Team!

[@ОНЯ.С.ОЧИЛАТА]

Autodoc thank you. You show us amazing things many thanks

[@autodocuk]

Thank you for your comment! Stay tuned for more! Best Regards, Autodoc Team.

[@seven73ify]

Great video guys thanks!

[@autodocuk]

Thank you for the feedback! We are glad you find our video interesting and informative. Stay tuned. Best regards, Autodoc.

[@ricardoEG1]

Hi .. Did you had to compress the coil spring in order to get the strut loose .?? I will like to know Thank you for the video

[@MoJoeRyhsen]

You need a spring compressor. Most shops that do suspensions have these mounted to the wall but you can buy/rent spring compressors from most parts stores. If you've never done it before be EXTREMELY careful. It can be very dangerous as the springs are under heavy load when compressed.

[@autodocuk]

Do you mean in order to get the stabilizer link loose?

[@autodocuk]

Thank you for the feedback! Your opinion is important for us and we will take your remarks into consideration! Best regards, Autodoc.

[@14landofthefreed]

Are there specs for the height adjustment?

[@autodocuk]

Leave us a comment saying what videos you'd like to see on our channel.

[@tolgaegemenertolga4683]

what is that seen on 01:30? thanks alot

[@autodocuk]

Thank you for your feedback. This is the ground clearance sensor used for the headlight adjustment system. Best regards,Autodoc!

[@dillee9988]

Thanks.

[@martinhenneberry2501]

The large bolt securing the arm should only be tightened when 4 wheels are on the ground otherwise the bush will wear prematurely dud the the stress of nit being in the correct position.

[@autodocuk]

Thank you for your comment. You are absolutely right, the final close-fitting of silent blocks of arms should be done when the car is on the ground on all 4 wheels. Best Regards, Autodoc team.

[@eurokom3679]

nice video

[@kanwalgill3853]

Thank you

[@autodocuk]

Thank you for the feedback! We are glad you find our video interesting and informative. Stay tuned. Best regards, Autodoc.

[@ianmcass]

Turn the bolt the right way!! Remember "Righty Tighty" :D

[@autodocuk]

Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, without going into all the technical nuances. Best regards, Autodoc.

[@drissbelarragui5303]

Merci frère

[@autodocuk]

Bonjour! Merci pour votre commentaire! Nous travaillons pour que nos vidéos soient utiles pour vous. Si vous avez des questions, n`hésitez pas à nous les poser. Notre équipe est toujours prête à vous aider. Cordialement, l’équipe Autodoc.

[@drissbelarragui5303]

autodoc.co.uk merci beaucoup 212 0623454056 whatsapp OK 😉

[@faresal-saket8968]

Audi 80 1991 carburetor tuning plz

[@autodocuk]

Thank you for the feedback! If you are interested in any spare part for your car, you can contact a specialist of our company. Best regards, Autodoc.

[@antoniousdixon6342]

i had it done and it still make a click noise what could it be

[@autodocuk]

Thank you for the feedback! We strongly recommend you to visit a specialized car service center. Best regards, Autodoc.

[@mokithebear2878]

All good but i believe what the guy changing is not lower control arm but the upper one

[@autodocuk]

In the video, the mechanic replaced the front lower front suspension arm.

[@jblack8149]

Torque specs

[@autodocuk]

You can find this information in the technical documentation for car repair. AUTODOC

[@ridds777]

Alignment afterwards...

[@plasnu]

This is upper arm.

[@Cografiya_Aydin.S.Elizade]

Difficult than Japaneese Compact Cars.Example-Toyota,Nissan

[@brunowest5027]

Yes it's actually upper arm. Watch out when buying on their site for this part. They put both upper and lower arm in the same filtering search. I bought the upper arm but in product description it says lower arm. Hence the video is a mistake

[@brunowest5027]

Or intentionally misleading i don't know

[@BBoySewo]

Always check your VIN parts catalogue and buy the parts matching to OEM number.