How to change the blinker bulb on a Chevy Express Van 2006-2017

[@weirdoswithaname63]

This was the most helpful out of all the videos I saw

[@chrisjennings452]

Thank you. I was stumped how to get the upper decorative piece of black plastic off and this helped me a lot. Thanks again

[@wpaldridge]

Great video! Very clear. Thanks for making it! Saved me from having to figure it out on my own in the dead of winter.

[@SAKURA-iq6ld]

I replace the bulb but it is still not working

[@bullseyenate231]

Be sure that the bulb is securely in the socket. There are small metal contacts that have to be touching in order for the bulb to make a connection. You can also try to check your wires or the actual socket and fuses to ensure you are covering all of the basics.

[@ronmiller7248]

Clean the sockets too. They get crusty and the sockets do go bad. I believe they sell those small harnesses that include the 2 sockets back to the connector. Also, check the ground right inside each door and make sure it isn't shorted out. You should have 12v back to the bulb socket when the pedal is pressed. The 3rd brake light and the left and right are all connected so if your 3rd is working, follow the harness wires.

[@oktophx]

Do i need to disconnect the battery first?

[@bullseyenate231]

No, you don’t need to disconnect the battery to do this.