🛠️ How to Configure VelocityOne FlightSystem Yoke for MSFS 2024: Step-by-Step Guide! 🚀

[@michelberube7345]

For the ones who have problem with the yoke working backword,i had that problem! Go to "Flight control surfaces,go to "Primary controls"go all the way down,the last line at the botton is "Elevator axis",just reverse them! That's it!

[@markhudsonafc]

Thank you so much!! Was dreading setting up my velocity one.. But you made it really easy to do again.

[@Highintheflightsimsky]

good to hear

[@acidburstman]

Thank you so much. This was very helpful

[@Highintheflightsimsky]

glad to hear is was very helpful

[@TENGILL]

Thank you for the video. I would have liked a picture in picture of the yoke, so you could have pointed out the exakt position of the buttons. But this will work using the reference chart you get with the controller.

[@Highintheflightsimsky]

thanks for mentioning thanks for the feedback. let me see if I can add it easily and post an updated video about it for people watching the video in the future

[@Highintheflightsimsky]

FYI posted an updated version

[@Rip1Outdoors]

Thank you for this video. I’m looking for help with throttle thrust reversals on the 208 and tbm. Seems the way 2020 did it doesn’t work now. Any help appreciated

[@Highintheflightsimsky]

Let me check, reversing throttles always has been difficult tbh but let me have a look at it and I will post a video about it

[@dimitrijensk2845]

So in default planes the throttle, mix, and prop work fine. In third party planes however, I the throttle is working but the mix and prop isn’t. Any guesses as to what this could be?

[@Highintheflightsimsky]

Do you have some examples of 3rd party planes which do not work?

[@gerardlionpulse1956]

Hi there, could you please give some advice for the Turtle Beach VelocityOne Flightstick?

[@gerardlionpulse1956]

I'm on Xbox Series X

[@Highintheflightsimsky]

Hi Gerard woud love to but I don't have the joystick, what is the issue you are experiencing?

[@Highintheflightsimsky]

nice

[@derekyoung4637]

Yes I have a problem with my Hotas one joystick,my throttle was reversed and so was my joystick.The throttle was an easy fix ,but the yoke I still can't fix yet.

[@legendarydaniel_.6883]

@@derekyoung4637 how do you fix the throttle ?

[@Highintheflightsimsky]

did you try to press the gear option which will give you the abiltity to select the invert option.

[@legendarydaniel_.6883]

@ no I have a T flight Hotas one

[@derekyoung4637]

@@legendarydaniel_.6883 I found out how to invert the yoke back.Don't use the elevator up and down key,ONLY use the "elevator axis" and click the gear and it will allow you to click invert .You're welcome

[@michelberube7345]

My Congratulations for your video! Thank You! I don't have any tool bar and i tryd every mapping to get it and it doesn't work. Either,i can't get to the horizontal box at the top right of the screen, where there is the 2 little human's heads stick together and when i open my console it shows those 2 heads with a comment saying "Warning" Do you know what this is for? Thank You! DinoPilot 8860

[@Highintheflightsimsky]

Hi Michel, so you are experiencing this issue on the Xbox right?

[@michelberube7345]

Hi,yes on xbox x

[@Highintheflightsimsky]

Ok I also had it on my pc with some controls

[@CashMoney5280]

Im running msfs on a xbox. Im using the velocity one. For some reason the yoke is inverted. Pushing in make the plane go up. Pulling the yoke makes the airplane go down. Any solutions?? I seen other comments experiencing the same issue with no resolutions . Any help is appreciated. Thanks

[@Boba_Fett-zq8uj]

@@CashMoney5280 I had this problem too if you go to the settings for the elevator press the cog and you will see set inverted axis. Click that and it should work.

[@CashMoney5280]

@ thanks 🫡

[@Highintheflightsimsky]

inded as already mentioned use the inverted checkbox should resolve it

[@lilrott3460]

@@Highintheflightsimsky where can I find it ?

[@carshowvlogs-ko8nh]

You have to click on the little gear symbol next to the elevator option in the controls setting