How to Connect Verizon 5G Home Internet to a WiFi Router - Step by Step Tutorial

[@philmister]

Great video. The new Verizon 5G home is now under Network Settings, Network Connection, Bridge, and IP passthrough.

[@ANewIdeaFarsi]

Thanks for the update

[@richardroffers2530]

Perfectly explained and exactly what I was looking to do. Thanks for sharing.

[@WEALLHIDEBEHINDAMASK]

Save me a lot of stress, great video tutorial! Thanks for sharing!

[@ANewIdeaFarsi]

I am glad I could help 👍

[@techgoose]

Thank you; this is exactly what I was struggling to find out if it would work from Verizon.

[@ANewIdeaFarsi]

You are most welcome 🙏

[@Edie876]

thanks bro i really needed this tutorial so after this video I subscribed to you right away

[@ANewIdeaFarsi]

Most welcome and thank for the support

[@dc271974]

Thank you! Such a well explained video on how to swap the router portion out and use your own. Help me a lot. Great tutorial!

[@ANewIdeaFarsi]

I am glad that you found this tutorial helpful 🤗

[@3rdTemple]

Thank You! You helped me set up my Orbi through the cube. Cheers!

[@Placesandspaces35]

Need to change the mtu setting in the router from the default 1500 to 1428 which is what Verizon recommends for their service. This will help prevent packet fragmentation.

[@ANewIdeaFarsi]

Thanks. This is very useful 👌

[@trynottodie488]

Is that for packetloss for gaming ?

[@Placesandspaces35]

@@trynottodie488 that is their recommendation overall to prevent packet loss in general. Set my router to that and have had no issues and virtually no packet loss to speak of.

[@alexhernandeezy2227]

Where is this setting?

[@Placesandspaces35]

@@alexhernandeezy2227 for ASUS routers it is in the wan settings.

[@jeremywheeler2122]

This is helpful. I like my Verizon internet, but it doesn't have very much range unfortunately. Being able to hook it up to my old router will give me the range I need. I needed to go outside for my security system cameras.

[@ANewIdeaFarsi]

Good luck 😉

[@tylenoljackson9378]

You can also just hook up your router to port 2 without IP passthrough and use it as an access point. It works the same, you just can't access the router GUI. You then have option to use the gateway wifi or your own router's wifi, or any device hooked up thereafter to the network.

[@ANewIdeaFarsi]

Thanks. It was very helpful.

[@thomasnguyen7934]

Thanks for sharing, I do the same way without enabling the ip passthrough. The 2.4 for some reason doesn’t want to work with my WiFi outlets so I use my tplink 2.4 for it to work. However, I’m able to access my router configuration, even remotely.

[@1psydlogic]

I inadvertently started out on port 2, when I look at the control settings it shows ip passthrough (in green) is connected BUT the checkbox isn't checked. I have eero mesh, so I just plug and played my eero after setting up verizon box - and happen stance used port 2. Does connection in green in ip passthrough (although not checked) mean it is on? My wired download speed is about 300 mb, with wifi 160-200...depending on house, that is 24 hours later, I believe this can change with time. ty

[@WafflesMcFluffy]

@@ANewIdeaFarsi It didnt work for me, when i go to my verizon page i dont have the "IP Passthrough" section, I lookd at advanced and theres no such option. I also tried Tyleno's tip and it didnt work for me :( I have the same netgear router as yours.

[@ANewIdeaFarsi]

@@WafflesMcFluffy I would suggest factory resetting your Verizon internet box and if that didn't work you can always call verizon and ask them to turn it on for you so that you can connect a different router to it. Good Luck

[@bobbyg7552]

Thank you so much. I have the R7000 as well and want to do exactly as you have done.

[@ANewIdeaFarsi]

You are most welcome. Yes. I am very glad that I did that.

[@milosusa]

Yeah I did that like 5 months ego and internet is a working great with my stronger router. Only problem is that I can't connect to the Verizon box settings anymore. I assume because is not acting like the router anymore, right ? Not that I need to connect, just wondering, if the Verizon would do some software updates will box update anyway without me accessing the box and click on software update in setting . Any idea ?

[@ANewIdeaFarsi]

Hello. You can still access the box admin setting page using Ethernet cable. I am not sure about the software update though. I never thought about it to be honest.

[@milosusa]

@@ANewIdeaFarsi Yeah tried connect my laptop to both Lan 1 and 2 after disconnecting my router from the box , but not work anyway. But till is working great I don't really need to connect to the box.

[@orestesdd]

I got a Verizon 5g gateway WNC-CR200A, which is a different model from yours, but I'm unable to find the IP passthrough to "configure". Does anyone know where to look for it on my gateway model? Thank you. 🤔

[@ANewIdeaFarsi]

Hi see if this link can help you: www.verizon.com/support/knowledge-base-301824/

[@blovejoy123]

Thanks for the video! Two questions. 1. My laptop doesn't have an Ethernet port. How do I maintain control throughout the process of adding a router? And 2, what I am actually trying to add is a two-piece Eero Pro 6e mesh system. I realize it's not the same as adding a true router like you did, but what's your opinion of that Eero system? Thank you!

[@ANewIdeaFarsi]

Hi. I wish I could help you but I am really not sure how to do this with laptop that doesn’t have Ethernet cable. I have never used Eero product but I did some google searching and instructions came up.

[@blovejoy123]

@@ANewIdeaFarsiFair enough. And definitely helpful. Thank you very much.

[@bbalestier]

I will give this a go THANK YOU!

[@ANewIdeaFarsi]

Good luck- after 4 months, I am still happy with it.

[@badinfluence3140]

does this require any form of COAX outlet or plug?

[@ANewIdeaFarsi]

No

[@MrMasterChrisXbox]

Do you think this router will work fine for gaming? Should I invest in a more expensive “gaming router” instead?

[@ANewIdeaFarsi]

I haven’t tried it with Verizon internet yet. I get around 200mb/s most of the time so it should be ok I guess.

[@MrMasterChrisXbox]

@@ANewIdeaFarsi I live in a very rural area and get less than 10 mbps but with the help of a 4x4 mimo antenna connected to the Verizon box I get in the range of 20 to 50 depending on the day. Interestingly enough using this method the router seemed to give me slower speeds when an Xbox was connected via Ethernet to the router that was also connected wirelessly to the Verizon box via up pass through.

[@THEREALSINNER247]

This should work with my Google mesh router aswell?

[@ANewIdeaFarsi]

I haven’t tried it but it should work. ☝️

[@justina.simins8300]

I did this to my router, and it works great, however instead of the white light I have a solid green light. I know the green light indicates the wifi on the Verizon gateway is disabled (which it is in passthrough mode), but in the video, you have a solid white light. Should I have a solid white light or solid green light?

[@ANewIdeaFarsi]

If you are connected to the WiFi through your router then the color of the light doesn’t matter. I think you have the newer version of the Verizon box and it has green light instead of white. But make sure you are connected to your external router.

[@jimdowney6580]

Once you enable passthrough is Lan 1 port no longer usable for an ethernet connection to the internet? In other words, had you not disconnected your laptop would it still be connected to the internet or only the Verizon cube?

[@ANewIdeaFarsi]

Good question. I think I would still be able to use it as Ethernet. Since my router has 4 more Ethernet ports, I never tested to see whether lan 1 can be used as Ethernet

[@thomasnguyen7934]

You can access the Verizon though your phone to disable the ip passthrough via its admin login.

[@MR-js9ic]

Thank you this helped a lot 💯%

[@ANewIdeaFarsi]

Thank you

[@guysam3242]

Thank you so much ........................

[@ANewIdeaFarsi]

Most welcome 🙏

[@ConanNYC]

I have the Verizon 5g home internet. Can i connect wire to my tv but keep the WiFi on for my other devices ?

[@ANewIdeaFarsi]

Yes you can, I don't see why not.

[@ithork]

what if you don't have a computer with ethernet? Can you connect to the router configuration page via wifi?

[@ANewIdeaFarsi]

They might have updated this so I am not sure but back then You had to contact via Ethernet to do this. Using WiFi you could change other settings but not this setting.

[@robertb.9702]

Once you plug in your netgear router, do all the settings and connected devices automatically transfer over to the netgear. Does the ssid and passwords all remain the same?? Also, if you need to access router settings are you using Verizon settings page or are you now logging in to the netgear router?

[@ANewIdeaFarsi]

Yes my password didn’t change. To change the router settings you need to log in to your router page in my case is Netgear.

[@1clyderider]

Thank you this was very helpful! I was following along and did what you were doing. I panicked a bit when I had no internet connection to finish watching your video after I plugged in the Ethernet cable 😮. I figured out that I needed to use my old Netgear connection and password 😂 then everything went smoothly! 🎉

[@tellthetruthoritllbetold111]

I just bought the Verizon 5g box and it came with Ethernet cables. I’m just kinda confused. If I don’t have a wifi router like you, but only a 5g Verizon white box & two Ethernet cords and a computer is that okay? Or do I need a wifi router for Ethernet to work as well?

[@tellthetruthoritllbetold111]

I am trying to do those jobs where you work from home and Ethernet is required

[@ANewIdeaFarsi]

You don’t need a router if you have the box. That box is modem and router but the reason I connected my own router to it is because I get better internet speed.

[@tellthetruthoritllbetold111]

@@ANewIdeaFarsi thanks so much! Great video by the way!

[@billisrael5609]

I have an Orbi Mesh setup and seems to work ok but my satellite router is not being recognized and is offline. I have an Ethernet cord running from port 2 of the Verizon router into my main Orbi router. But the satellite router I have upstairs is just showing offline. How can I have it also connected?

[@ANewIdeaFarsi]

I haven’t had a chance to work with Orbi Mesh setup but hopefully someone here can answer your question. 🤞

[@ericarmenat2786]

If I change my mind and want to get back to the gateway webpage to turn off the pass through, how do I get back to the ip page since I have off port number 1?

[@ANewIdeaFarsi]

You can still use the same port to log in to your Verizon admin account and undo everything.

[@darkgam1ng976]

Does connecting a router affect any speeds?

[@ANewIdeaFarsi]

My speed improved when I connected to my router .

[@ClayHutchins]

How do you turn back on the Verizon 5G wireless network after turning on IP passthrough in the event one changes their mind and wants to go back to using the Verizon 5G wireless option?

[@ANewIdeaFarsi]

You can still get there if you connect the cable to port 1. Use the same URL and Password.

[@donmeyers3090]

@@ANewIdeaFarsi I successfully changed my Verizon 5G Model ARC-XCI55AX to passthrough mode. However, when I now try to log back into the router via LAN1 port, I cannot connect any longer. I tried LAN2 as well, no good. Tried a dozen times and can no longer access the Verizon Modem - I keep getting an error and it never takes me to the Password page. Not sure what to do now if I decide I need to return it.

[@jdub2878]

​@@donmeyers3090Just reset your router so that it returns to the original factory settings.

[@donmeyers3090]

@@jdub2878 Thanks. It's been done.

[@IIIIIIIllIIIl]

Why do you need to plug the Verizon thing into the computer can’t it all be setup from a phone app?

[@ANewIdeaFarsi]

This is the easiest way. You need to plug in the Ethernet cable.

[@onlysaucenoketchup]

hey from me the enable IP passthrough option isn't showing up at all. Do you have any idea why?

[@ANewIdeaFarsi]

That will get enabled if you follow the exact steps. You need to connect the cable to the right port. Good luck 👍

[@Man-rf7hx]

does it matter on which address I authorize it?

[@ANewIdeaFarsi]

I am not sure what you mean. Please explain a little.

[@suleeeeee-x5m]

I dont see LAN under network anymore? something changed?

[@ANewIdeaFarsi]

they probably updated the interface.

[@annaduarte8979]

What router are you using?

[@ANewIdeaFarsi]

Netgear Router R7000

[@milosusa]

Yeah I did the same, but every 24 hour or so I will lose the internet and need to reset the Verizon cube. Any idea to how to stop that ?

[@ANewIdeaFarsi]

Honestly I have no idea. Sorry. Maybe you need to talk to Verizon and change your box.

[@AlexanderAragon-r2r]

How do I find that Verizon page it’s not letting me when I put those numbers

[@ANewIdeaFarsi]

Please make sure you follow all the steps as I have described. Also some browsers are not supported so use different one

[@seangorena2586]

What about DHCP? Its not a good idea for both routers to handle DHCP. I heard you need to turn off the protocol on one of the routers.

[@ANewIdeaFarsi]

That I really don’t know. I think doing it this way you only using the DHCP of the third party router.

[@TheJeof1000]

can you just replace your verizon router directly?

[@ANewIdeaFarsi]

What do you mean? I use the Verizon cube as a modem only. The router in that cube is not the best that’s why I prefer using my netgear router.

[@TheJeof1000]

@@ANewIdeaFarsi replace or use yoir own router. Without passing through the verizon router.

[@ANewIdeaFarsi]

No. You have to use your Verizon box as modem. All I do in this video is, I disable the router part of Verizon box and use my own router instead. The modem part of Verizon box still works and we need it to receive internet.

[@steveo321able]

Question I did not see your 2.4 g ? I saw your 5G.

[@ANewIdeaFarsi]

It depends on your router. Maybe I missed it but I have both. Usually the newer routers have both 2.4 and 5.

[@steveo321able]

@@ANewIdeaFarsi oh okay! Thank you for getting back to me ASAP. I will definitely try that because I definitely need that signal split for the ring doorbell to work

[@phillipgurajena380]

Is a computer mandatory

[@ANewIdeaFarsi]

You might be able to use your phone as well. Since I haven’t done it myself I can’t say for sure.

[@CharlesNolanArt]

It is unbelievable how many ppl dont understand this.

[@mizaelcasillas846]

After accepting the ip pass through, it’s taking forever to apply settings and the box light stays yellow

[@ANewIdeaFarsi]

I think you need to push the reset buttons and turn it back on.

[@slimsaturn]

Just an FYI - The menu layout has changed since this video. The path is a bit more convoluted.

[@jess488blah]

update on where to go?

[@lauram8298]

Yes...I need help and all videos show this simple WEB INTERFACE and mine from OCT 2023 has many changes. I still after 2 days of off and on trying to solve have not been able to get my system working for the throughput so I can use a tablo remotely and I need my TP Link due to the limited broadcast of the onboard wifi.

[@HDColic]

No ethernet port on any of the laptops in my house rip

[@ANewIdeaFarsi]

That is interesting 🤨

[@donjohnson7550]

I don’t have that port at home

[@ANewIdeaFarsi]

They might not be in the same spot but you should have it.

[@mikestewart5387]

Disable the WIFI radios in the Verizon gateway to avoid interference.

[@ANewIdeaFarsi]

I will try that for sure. Thanks for sharing!

[@bobbyg7552]

How do you disable the wifi radios in the verizon gateway?

[@ANewIdeaFarsi]

@@bobbyg7552 just follow the steps and that will take care of it.

[@delandostayreal288]

Mine is fast without it

[@doughboy4681]

🍪 there you go