How to Crimp a Terminal

How to Crimp a Terminal for your wiring project. Any successful wiring project starts with good crimps!
Terminal Crimper - www.iwireservices.com/product...
Strip and Crimp Tool - www.iwireservices.com/product...
All iWire Tools - www.iwireservices.com/wiring-...
iWire Connectors - www.iwireservices.com/online-...
How to Depin a Connector - • How to Depin a Subaru ...

[@britishcomposers]

The only presentation that has clear images to represent the step-by-step stages and the finished connection; all admirably demonstrated. Thank you. I'm actually wiring a prototype high-end home hi-fi stereo loudspeaker system with brass spade connectors: avoiding soldered joints which clearly add unwanted noise to the treble. Brass, like copper, has superior signal transfer with minimal pick-up of noise at the contacts.

[@iwiresubaruwiringsolutions5538]

Thanks!

[@gilsonfelix3415]

Loved that even though I can't see clearly the gages of the tool and how it works on front wings. Maybe closer view and some explanation on how it bends the front wings will be a better help, although this video's already helped me a lot, thank you.

[@groovypavement2697]

Whitney, by watching your tutorial I was actually able to use the wire cutters you used to strip the wires to actually crimp the connectors! That's all I had and they came through in a PINCH! (sorry-not-sorry, been a Dad for a long time now). Also... NICE FRIGGIN ROCK!

[@brittandthatsall]

Good job with your straight-forward and clear presentation.

[@waynehughes1341]

Thank you. Needed a refresher after about twenty years. Nice and clear, no nonsense 👍

[@ShaneLH317]

Thank You!!! Straight-fordward and Exactly what I was looking for. WIsh I had found this about two hours and one grown-man-tantrum ago. Haha. Thank You Again!!

[@joehead1294]

Impressive wire stash!

[@SushiPac]

Thank you for the little video!! Just submitted a order for the blue handled tool. Going to be doing some wiring this weekend

[@LostInPhilly89]

Thanks for the great instructions! I just ordered new fog light plugs for my WRX. I would have had everything torn apart without realizing that there's a specific crimping tool required. 😅

[@SushiPac]

Thank you for the little video. Just submitted an order for the blue handled tool off the website. Be doing some wiring this weekend.

[@iwiresubaruwiringsolutions5538]

Glad we could help :)

[@richardowen9466]

Thank you so much! Great video.

[@WhyDidYTstartThisHandleShit]

thanks for this, great vid. those with a 2015+ yamaha R1 have to dig to find the MT .090 connector, hidden under a body panel beneath the left clipon. then to connect whatever you're wanting accessory power for, you have to.. do this shit. didn't wanna be that guy that just jim-bob's everything together just any old random way..

[@triggersw3350]

Good logical step by steps and clear commentary but could have done with closer closeups and the camera holding the close-up for a tad longer so I could see exactly what had been done at each step.

[@LostInPhilly89]

You do know you can pause the video and make it full screen, right?

[@johneric3886]

Good demonstration very professionally done 👍

[@edwinchua]

Thanks for the guide

[@bvward]

Great explanation and demo.

[@bvward]

@Nova Darwin How does this relate to the video clip? Have you been reported to KZbin yet?

[@williamtamelng8248]

great informative video.

[@markferraro5250]

Thanks for this

[@completetuningsolutions]

Great video. Only tweak I would offer would be to put the seals on before stripping the wire. Easier to thread on.

[@iwiresubaruwiringsolutions5538]

We like to strip first since there isn't always enough room to put the seal far enough back on the wiring harness to then strip it :) Appreciate the compliment on the video!

[@completetuningsolutions]

@@iwiresubaruwiringsolutions5538 I understand that completely. Been there done that have the finger cuts in working in tight spaces.

[@jmanci910]

This was helpful. 👍

[@regularguy8592]

great video, now show us how to do this under a car ,standing on your head with wires you can barley reach with arms fully extended lol

[@chelseaspears1745]

Ty!❤

[@fiercefix]

So many crimper & crimps available now it's difficult to know which to purchase & stock especially when manufacturers use different methods, tools & shapes.

[@bonjey1]

Exactly the issue im having right now

[@rhuttunen]

Thanks!

[@krayzieegg7294]

Hi what type of crimping pliers to use for the pins of hm 090? Thanks

[@iwiresubaruwiringsolutions5538]

You can use the crimpers we sell for that terminal.

[@tomvang18able]

Do the WRX green test connector under steering wheel go bad? I think mines is bad. I was flashing my 02 WRX recently a lot and all of a sudden I can't flash it no more. Can't get the car into test mode at all. Still able to go onto ecuflash and able to click on read/ write icons but can't do either one cause car can't go into test mode.

[@iwiresubaruwiringsolutions5538]

Hi Tom, there are a few variables for why test mode is not working but bad connectors could definitely be the problem.

[@tomvang18able]

@@iwiresubaruwiringsolutions5538 I'm not sure what to do at the moment. What do you think I should do?

[@iwiresubaruwiringsolutions5538]

@@tomvang18able I'd recommend taking it to a local shop for diagnosis

[@tomvang18able]

@@iwiresubaruwiringsolutions5538 is this something I can do myself or better to just take to a local shop?

[@iwiresubaruwiringsolutions5538]

@@tomvang18able I'd recommend a shop in this case since you're not quite sure what the issue is being caused by. If you know it's a bad connector, then the replacement of just the connector is easy and can be done at home.

[@donavanmurillo9623]

Can I crimp it with a regular stripper/crimping tool?

[@iwiresubaruwiringsolutions5538]

Yup :)

[@brandongilliam3573]

Do you have a video of how to change a terminal ?

[@iwiresubaruwiringsolutions5538]

Only what is covered in the video above.

[@Onedollarcamera]

How to take it off?😢

[@iwiresubaruwiringsolutions5538]

This may be what you are looking for kzbin.info/www/bejne/iGPInIl5oreAmZo&embeds_referring_euri=https%3A%2F%2Fiwireusa.com%2F&embeds_referring_origin=https%3A%2F%2Fwww.iwireservices.com&source_ve_path=MjM4NTE&feature=emb_title&ab_channel=iWireSubaruWiringSolutions

[@michaelhawk-fitz7563]

hammer curls, hammer curls, hammer curls..please..

[@imrani5084]

Tool name and model please

[@iwiresubaruwiringsolutions5538]

Here ya go - iwireusa.com/collections/wiring-tools/products/terminal-crimper

[@lukeyoder7072]

Her the whole time 😳