Try mixing in 1/2 a container of denatured alcohol. It should thin the mix out and buy you about an hour or so before curing. Great way to make it self-leveling and less wasteful.
@LujinCustom Жыл бұрын
Also, look into buying a box of boba straws. You can cut em down and stick into the sugar as placeholders for the coolant passages.
@SIRICKO3 жыл бұрын
After my first video on youtube so many have done this now. lololololol I have to say Moroso engine block filler, is far Wayyyyyy stronger then Devcon. I'm rebuilding my D series on my channel now as we speak. Quick tip when using devcon everyone fails to do is after you apply it the head must be mounted before is dry. People let it dry first then bolt the head on that's A no no. The cylinder will compress and crack the devcon. the devcon must dry under pressure.
@dylan49723 жыл бұрын
Is it the same with the Moroso, have to torque the head down before it's dry?
@dylan49723 жыл бұрын
Also I thought the Devcon was better for alloy blocks as the expansion rate for the Moroso is more like cast iron?
@SIRICKO3 жыл бұрын
@@dylan4972 I agree
@562frankrivers23 жыл бұрын
Man your building a monster, can’t wait to hear that
@dillonfortune13522 жыл бұрын
Future plans for my build. How do you know at what level the sugar needs to be added not to interfere from the water channels. Sending shout from Cape Town, South Africa
@somethingeasy7880 Жыл бұрын
Ok so I'm curious tho If I was to devcon to run 400hp reliable on a b18a1 with all new internals and a b20head built would devcon make it more or less reliable for daily driving
@tennesseelawns2 жыл бұрын
Hey big dawg yo gasket was upside-down those holes you drilled out won't match twhen you put the gasket on properly some will line up but others will not
@northwoodsrippers96393 жыл бұрын
Ever do any block studs?
@boostedrr72052 жыл бұрын
I wonder if there’s a way you can make a mold using an old head gasket, cuz i don’t really wanna do all that sugar stuff and pushing water through it.
@Autosauce2 жыл бұрын
What do you mean? it’s supposed to have coolant and water running through it by design?
@boostedrr72052 жыл бұрын
@@Autosauce oh I just had an idea of using the head gasket, like the outlines of it pretty much and using them building a mold based off that. then filling said mold with epoxy
@RomanGamingMaster3 жыл бұрын
Hey man, love the videos but I was wondering why your doing this build again? Didn’t you say you was having overheating problems with the last one?
@boosted__demon68523 жыл бұрын
I'm super excited lol at least 400-450hp
@reloaded12343 жыл бұрын
Que revolu!! suena a bori
@josemercado69573 жыл бұрын
Suenan a Bori bien duro jaja
@sabz_bhp2 жыл бұрын
How did the devcon hold up
@stevenyammine29082 жыл бұрын
dumb question how does filling it helps for high horsepower i dont get it
@ruffraff4697 Жыл бұрын
Closed deck blocks hold better power as compared to open Deck which you see here,from what I read is that they vibrate or move under heavy load/more boost not welcome
@paulkendall343 жыл бұрын
I use bolts
@DC5_ZAY_3 жыл бұрын
I know this is probably a dumb question but why did you use the sugar again? I thought that was bad for your motor
@masterdebater00103 жыл бұрын
I think it was just so that the mixture has something to sit on top of while it dries. They flushed the sugar out with water
@Autosauce3 жыл бұрын
Yes Juan Rivera is right, but make your you flush it out thoroughly.
@DC5_ZAY_3 жыл бұрын
@@Autosauce ah okay I was just really confused but it makes now!