How To - Dual Camera Inputs on Pioneer AVH-NEX In Dash Receivers 2017

[@franciscofranco5739]

Lol damn this guy is so in depth (in a great way) so glad I went with Pioneer.

[@pioneerelectronics]

You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzbin.info/www/bejne/rqfTY2xnZamkh9U and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@UltimateHustler100]

I must say your explanations are extremely precise and clear, thank you for that.

[@deckerdotto6035]

You can find more videos about Pioneer AVH-2330NEX here: kzbin.info/www/bejne/rqfTY2xnZamkh9U and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@UsCrestElectric]

Thank you for your clear explanation. WHERE DO YOU CONNECT THE 2ND CAMERA’S POWER?

[@deckerdotto6035]

I recommend for the 2nd camera to be on and ready when you want to use it. I recommend to connect the camera's power wire to a circuit in the vehicle that has power at all times when the vehicle is on and shuts off when the vehicle is off. I don't know about other camera brands. The Pioneer ND-BC8 camera needs power and ground to operate. The camera should always have power when the vehicle is switched on. And the camera should power off when the vehicle is switched off. This is very similar to the way the Red Accessory wire works on a Pioneer in-dash receiver. Just because the camera has power does not mean you are viewing the camera window on the in-dash receiver. You can find more videos from Pioneer about NEX in-dash receivers here: kzbin.info/www/bejne/i5KqnaqgoL-JpZY and you can find more videos on Pioneer's KZbin Channel here: kzbin.info and by the way, the caps lock on your keyboard appears to be stuck.

[@daneco3]

To have both these functions Does the camera need to be hooked to constant power and the brake light or one or the other?

[@deckerdotto6035]

Be sure to plug the back up camera into the Brown Input on the back of the in dash receiver. The camera should have power when the vehicle is switched on. The camera should not constant power. The purple wire with white stripe is used to let the in-dash receiver know that the vehicle is in reverse and to open the backup camera window. Do not connect the camera to the purple wire with white stripe. You can see more about wiring in this video: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI The second camera is switched on manually. More videos about AVH-2330NEX can be found here: kzbin.info/www/bejne/rqfTY2xnZamkh9U

[@JuanCarlosLinares1977]

This is great, I am wondering if there is away to connect the 2nd camera to show along with the back camera when reverse, so I could hook up the 2nd camera under the side mirror, so that the screen would show both cameras at the same time,!

[@pioneerelectronics]

As of 2022 September, the Pioneer receiver will not show both cameras at the same time. On selected Pioneer receivers Camera 1 and 2 switching is shown here: kzbin.info/www/bejne/hZnbm393mriGirc Camera 1 or 2 can be displayed when the vehicle is in reverse gear. What is the model number of your Pioneer in-dash receiver?

[@JuanCarlosLinares1977]

@@pioneerelectronics thank you for the quick reply. I purchased the DMH-ZS9350BT. By the way, currently I am experiencing an issue with this unit (I already reported it to my local dealer), which the unit freezes when the Radio stations are changed manually, meaning when click on arrows, the frequency changes but very slow, after 3 clicks the unit freezes. But If I use the steering wheel controls then no problem, The rest of the features work fine. Have you seen this issue before?

[@pioneerelectronics]

@@JuanCarlosLinares1977 I'm sure you're in good hands with your local dealer to solve the issue. If I was trouble shooting the radio station issue, if the installation uses one, I would unplug the steering wheel control adapter and restart the vehicle. Then check to see if the problem persists. Issues like this are often caused by faulty add-on adapters or improperly programmed adapters, or adapters that need a firmware update. Please be sure you have the latest firmware on the in-dash receiver.

[@noahsrebnick2424]

On the AVH 3300Nex can the video input be used for a front camera? Any info would be helpful, thx for the great videos.

[@deckerdotto6035]

The short answer is yes, however it won't work like the dedicated camera input. Just plug the 2nd camera into the Yellow A/V input on the back of the receiver. Now switch to the A/V input source. You should see the 2nd camera. There will be no music while this camera is viewed because you are using an Audio/Video source with no sound input. To switch this camera off, you'll need to switch to another source. For more videos about AVH-3300NEX check out this You Tube playlist: kzbin.info/www/bejne/n5O6pmOlZ82KaJY

[@itolond]

Pioneer DMH-ZF9350BT - my vehicle is fitted with a HDMI output for reverse camera (incl 360 birds eye) cam the Mini HDMI be set as source for the Reverse/backup or will I need a HDMI-RCA cable (assume no need to convert digital to analog for this -eg RCA on DMH-ZF9350BT can decode ?)

[@pioneerelectronics]

Please contact Pioneer in your region for support with this product. You can find them here: pioneer-mea.com/en/contact-us/ You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@atveriss]

Thanks for the video! What if I want to connect the Lanewatch camera from my Honda? Originally it appears on the screen when I hit the indicator to turn right or hit the Lanewatch button on the steering wheel. Is there a way to configure this?

[@deckerdotto6035]

The Pioneer system is not designed for the automatic camera switching you want to do. You would need to wire in 2 cameras, 1 for the right, and 1 for the left, into one camera input on the in-dash receiver. That's in addition to the backup camera. Can it be done? Yes. The parts and installation may be expensive , and it may be clumsy to operate. It may be possible if you are using a idatalink Maestro RR. No guarantees from me. Please be sure to do research on this before buying. You can learn more about Maestro RR here: maestro.idatalink.com/product/product/product_id/102 You can find more How To videos about Pioneer NEX in-dash receivers here: kzbin.info/www/bejne/hZPTfIutp7Nrq9U and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@atveriss]

Deckerd Otto thank you so much for the info =D !! Would you have any clue how they did it in this video? (Action happens at 1 minute 05) kzbin.info/www/bejne/j6bbpaGCp9R6f9E

[@deckerdotto6035]

Not really, but I can take a guess. Please note: I was not there for the installation in the video you noted, and I don't speak Romanian. With that said, there are a couple possible things happening. First, Pioneer makes in-dash receivers in the European market that are very specific to selected vehicles. It's possible this is one of these very specific receiver/vehicle combinations. I'm not sure. The second possibility, is the vehicle only has one camera connection to the in-dash receiver, and the vehicle is doing the automatic video signal switching before the camera video signal gets to the in-dash receiver. Again, I'm not sure. If that's the case, Maestro RR may be a very important part of the installation. I recommend taking your vehicle to a qualified car stereo shop for help with installation.

[@carlfe4891]

You can buy an aftermarket 4-way camera switcher from PAC. It accepts 4x video inputs and 4x 12v+ triggers to switch between the cameras. It then provides a single video out and a single 12v+ trigger out. Connect that output to your head units "backup camera" and "reverse" wire. Connect up to 4 cameras (I assume front, back, left, right) and for the 4x 12v+ triggers you have a couple of options. The simplest is tap your left signal, right signal, and reverse lights. This way the left camera turns on with the left signal. I've tried other brands, but the PAC seems to be the best option.

[@justwanta30]

What port dose the camera go in as I can get my reversing camera to work

[@pioneerelectronics]

Pioneer in-dash receivers are designed to work with the Pioneer ND-BC8 backup camera. I don’t know about the operation of other cameras. Be sure to plug the Brown camera output RCA into the Brown RCA Input on the back of the Pioneer in dash receiver. You can see it in this Pioneer How To video: kzbin.info/www/bejne/qojMkJ6Mhcxlg5Y The Pioneer ND-BC8 camera needs power and ground to operate. The camera should always have power when the vehicle is switched on. And the camera should power off when the vehicle is switched off. This is very similar to the way the Red Accessory wire works on a Pioneer in-dash receiver. Just because the camera has power does not mean you are viewing the camera window on the in-dash receiver. The receiver’s violet/white wire is used to let the in-dash receiver know that the vehicle is in it’s reverse gear and, to automatically open the backup camera window on the receiver screen. Do not connect the violet/White wire to the camera. You can lean more about wiring your Pioneer receiver in this How To video: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@scootert2585]

My daughters head unit is the pioneer AVH 2300 NEX. I successfully hooked up a rear back up camera and got it to work. I tied into the reverse wire from the back of the vehicle and hooked it up to the purple/white wire labeled back up camera. Does this head unit support a 2nd camera? I tried to hook up a front facing camera and the screen is black but I can see the controls like the X and the timer button. I tapped into the red accessory wire behind the head unit and ran it to a toggle switch in order to power on the front facing camera. Does the head unit need the firmware updated to support a front facing camera?

[@pioneerelectronics]

The Pioneer AVH-2300NEX is designed to operate with only one camera. That's the dedicated backup camera. However, it's possible to use the AV input yellow RCA jack on the back of the in-dash receiver as a 2nd camera input. You can see it here: kzbin.info/www/bejne/qV61poWwqLeZe5o Be sure to use the AV input and not the video output. In this case, the camera must be wired with a toggle switch to power the camera on and off. Also, in order to see the camera image, you'll need to switch the receiver to the AV input source. It will not switch automatically. And the AV input source will need to be activated in the System menu. You can see it in this How To video from Pioneer: kzbin.info/www/bejne/hX6tZqyAa5Zobck You can find a full playlist of How To videos from Pioneer about AVH-2300NEX here: kzbin.info/www/bejne/oaGuip6pYpZqna8 And you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@Analyzer52]

Are the built in parking lines Dynamic Tracks Parking Lines? Or is that something that can only be done with a camera that has that feature?

[@deckerdotto6035]

As of 2019 October, the Parking Assist Guidelines generated by Pioneer NEX in-dash receivers are fixed lines with respect to the steering wheel position of the connected vehicle. You can move the lines to better suit the installation, but they do not dynamically move with the steering wheel position. However, in many vehicles, the factory camera can be used with the Pioneer NEX in-dash receiver, and if the factory camera has dynamic parking lines, they may appear on the in-dash receiver screen. You can find more How To videos about Pioneer NEX in-dash receivers in this Pioneer You Tube Playlist: kzbin.info/www/bejne/hZPTfIutp7Nrq9U Please be sure to install the latest firmware update for your Pioneer AVH-2500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-2500NEX#downloads You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@sweethenk3634]

Should the camera be from pioneer or I can use any brand to do the camera settings

[@pioneerelectronics]

Pioneer receivers are designed to operate with the Pioneer ND-BC8 camera. You can see an unboxing videos from Pioneer here: kzbin.info/www/bejne/oZiTepR9eJh9mKc You can buy one here: www.pioneerelectronics.com/PUSA/Car/Accessories/Rear-View-Cameras/ND-BC8 Pioneer in-dash receivers are designed to work with the Pioneer ND-BC8 backup camera. I don’t know about the operation of other cameras. Be sure to plug the Brown camera output RCA into the Brown RCA Input on the back of the Pioneer in dash receiver. The Pioneer ND-BC8 camera needs power and ground to operate. The camera should always have power when the vehicle is switched on. And the camera should power off when the vehicle is switched off. This is very similar to the way the Red Accessory wire works on a Pioneer in-dash receiver. Just because the camera has power does not mean you are viewing the camera window on the in-dash receiver. The receiver’s violet/white wire is used to let the in-dash receiver know that the vehicle is in it’s reverse gear and, to automatically open the backup camera window on the receiver screen. Do not connect the violet/White wire to the camera. When you put the vehicle in it’s reverse gear, the violet/White wire should sense a change in voltage. This automatically opens the camera window on the in-dash receiver. And closes the camera window, when the vehicle is taken out of it’s reverse gear. One possibly connection for the violet/White Reverse Gear wire is the vehicle’s backup lamp terminal. You can learn more about wiring your Pioneer receiver in this How To video from Pioneer: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI You can find more videos on Pioneer's KZbin Channel here: kzbin.info You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@FLORASTR38]

Excellent video! Ist the software similar or identical to the one in the pioneer avh 7200dab? Thank you!

[@pioneerelectronics]

If the model number is AVH-Z7200DAB, you can find a full playlist of How To videos from Pioneer about a very similar model here: kzbin.info/www/bejne/n5O6pmOlZ82KaJY and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@Michal_S0L]

@@pioneerelectronics i have an AVH-1300NEX is it possible to do the same with dual camera? or only available with the 1330?

[@pioneerelectronics]

@@Michal_S0L Pioneer AVH-1300NEX does not have dual camera input. You can find a full playlist of How To videos from Pioneer about AVH-1300NEX here: kzbin.info/www/bejne/hZPTfIutp7Nrq9U You can find more videos on Pioneer's KZbin Channel here: www.youtube.com/@pioneerelectronics

[@altruistization]

Do all the AVH NEX units have parking assist lines, or only specific ones?Which model should I buy to ensure it has parking assist lines in it?

[@deckerdotto6035]

Parking Assist lines are available on these 2019 models: AVH-W4500NEX: kzbin.info/www/bejne/Y3vMlaaGhbt-pKM DMH-C5500NEX: kzbin.info/www/bejne/jYHGipejrbZkaKc AVH-3500NEX: kzbin.info/www/bejne/pGeXqaxmd9aqhqs AVH-2500NEX kzbin.info/www/bejne/aHelp3mioZt6m9E DMH-1500NEX: kzbin.info/www/bejne/f2K7d6yInrmNgcU AVH-1500NEX; kzbin.info/www/bejne/ZoiWm3mKfrqgg6c AVIC-W8500NEX: kzbin.info/www/bejne/oXfKf3-Ols-ljtU You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@JB-kw4ug]

Do you know if this same procedure can be used on a AVX 4200 NEX? Thanks, Jim.

[@pioneerelectronics]

The Pioneer AVH-4200NEX has parking assist lines that operate very similar to what is shown in the videos above, and it has a 2nd camera input that operates very similar to what is show in the video above. The AVH-4200NEX also has the option of flipping the camera image as shown in this video: kzbin.info/www/bejne/bIe8YmOreM2Biqs You can find the owner's manual for the Pioneer AVH-4200NEX here: www.pioneerelectronics.com/StaticFiles/Manuals/Car/AVIC-4200NEX_OwnersManual012116.pdf Check out page 46 for detailed operation. You can find a full playlist of How To videos from Pioneer about AVH-4200NEX here: kzbin.info/www/bejne/nWbNppSBg72lb5I Please be sure to install the latest firmware for your Pioneer AVH-4200NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-4200NEX#downloads and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@Pokka676]

Can you use a seperate monitor for av input.? For example. if I put it in reverse the image is projected to the second monitor not the pioneer head unit

[@pioneerelectronics]

It seems like the simple solution is to run the camera directly to the 2nd monitor.

[@KickinChick06]

Do I need to use a pioneer backup camera for this unit? What if I already have a backup camera in hand? Will I be able to use the av input as the backup camera (triggers the reverse)? Thank you.

[@deckerdotto6035]

I recommend Pioneer back up camera ND-BC8 for best operation with this in-dash receiver. You can see it here: kzbin.info/www/bejne/oZiTepR9eJh9mKc The AVH-2300NEX may work with other cameras that have an RCA video output. One the back of the Pioneer AVH-2300NEX, use the Brown RCA input for the dedicated backup camera. You can see it here: kzbin.info/www/bejne/qV61poWwqLeZe5o and you can find more information about wiring your system here: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@jeffgordon8816]

My camera works great when in reverse, but nothing shows on the screen when I try to view it manually. It switches over as the screen goes black except for "items may be reversed" on the top of the screen. Any thoughts on how to correct this ?

[@deckerdotto6035]

In your wiring set up now, the camera has power only when the car is in reverse. Try it this way, The camera should have power when the vehicle is switched on. The camera should power off when the vehicle is switched off. The purple/white wire tells the in dash receiver the vehicle is in it's reverse gear and to open camera window and, you can open the camera window manually at any time. You can find more information about wiring here: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI and you can find more videos about the Pioneer AVH-2330NEX here: kzbin.info/www/bejne/hZPTfIutp7Nrq9U

[@carlfe4891]

On my car, the factory camera cuts power above 8mph. If you are using a factory camera it might be designed to only operate under certain conditions.

[@carlosaleman5404]

Is there any way to have a 3rd camera on AVH-W4400NEX? I want to have x1 backup and x2 for turning I would like them to turn on when I turn on the turn signal. Similar to how the new Honda civics camera works.

[@deckerdotto6035]

The Pioneer AVH-W4400NEX does not support Auto Camera Switching for the 2nd camera similar to the Honda Lane Watch system. On the AVH-W4400NEX, the second camera input would need an automatic switching system for the Left and Right side cameras. This may be possible with a 3rd party adapter added to the receiver. The receiver alone does not support this. More modern Pioneer receiver models like the DMH-W4660NEX seen here: kzbin.info/www/bejne/eGO3hZmAiqlgm9U or the Pioneer DMH-WT7600NEX seen here: kzbin.info/www/bejne/hWrciZ2cqr-Dqq8 do support this with the use of iDatalink Maestro RR2. Only selected vehicle are supported. Please be sure to research your vehicle to be sure it will work. You can learn more here: maestro.idatalink.com/product/product/product_id/836 Please note the AUX input can be used as a vidoe/camera input. Again, no automatic switching is available on AVH-W4400NEX. You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzbin.info/www/bejne/fYmbk3iKfc-Nock Please be sure to install the latest firmware for your Pioneer AVH-W4400NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-W4400NEX#downloads and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@adventuresofhess1058]

Perfect! I have a 5th wheel and move it by myself sometimes so now I can add a camera to see my hitch. Thank you so much. Very good vid and super easy to follow. Keep it up!

[@deckerdotto6035]

You can find more videos about Pioneer AVH-2330NEX here: kzbin.info/www/bejne/rqfTY2xnZamkh9U

[@sweethenk3634]

Hi Sir if you don't mind can you let me know the difference between DMH - Z series and DMH - A series, only audio wise example DMH - Z5290BT (it has a cooling fan at the back) and DMH-A5450BT

[@pioneerelectronics]

In what country do you live? Products with similar model numbers are available in different regions of the world.

[@sweethenk3634]

@@pioneerelectronics india

[@pioneerelectronics]

@@sweethenk3634 Here is Pioneer's web site for India: pioneer-india.in/ Generally, Pioneer DMH-Z receivers are more advance audio products over the DMH-A series of products. Advanced audio features may include, High, Band Pass, Low outputs, Independent crossover and slope controls, 4 volt RCA outputs, and Time alignment and Hi Rez audio certification. Please be sure to contact Pioneer India for more details. You can find them here: pioneer-india.in/blog/

[@sweethenk3634]

@@pioneerelectronics thanks

[@markh.2899]

Can I get dual cameras with the Pioneer AVH-W4400NEX ? Thank you, these are great videos!

[@deckerdotto6035]

Yes, dual camera input nearly identical to what you see in the video above works with the AVH-W4400NEX. kzbin.info/www/bejne/hZnbm393mriGirc Please note: The Parking Assist Lines you see in the video above are not available on Pioneer AVH-W4400NEX. If you want to use parking lines, I recommend using a camera that has it's own parking lines. You can find more videos similar to Pioneer AVH-W4400NEX here: kzbin.info/www/bejne/oaGuip6pYpZqna8 and here: kzbin.info/www/bejne/epiWfYeYnMmSlc0 You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@AD-eq4kn]

@@deckerdotto6035 does it work with a 1500 Pioneer

[@deckerdotto6035]

If you are referring to Pioneer AVH-1500NEX, the answer is no. The Pioneer AVH-1500NEX has one camera input. Not two. It is possible to use the AUX input as a camera input. However the 1-2 switching you see in the video will not operate on Pioneer AVH-1500NEX. You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: kzbin.info/www/bejne/hZPTfIutp7Nrq9U and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@judeeristhee9332]

Hi can the Dual camera sys work with: Pioneer AVH-210EX 6.2" DOUBLE DIN TOUCHSCREEN CAR STEREO with DVD BLUETOOTH???

[@deckerdotto6035]

No. The Pioneer AVH-210EX has only one camera input. The AVH-210EX has an AUX input that can be used as a video input from any video source including a camera. The AUX source won't work as the 2nd camera input you see in the video above, but it can be used for a camera that has to be "manually" switched on and off. You can learn more about the AUX input here: kzbin.info/www/bejne/j161m6uceNtpoqc You can find a full playlist of How To videos from Pioneer about AVH-210EX here: kzbin.info/www/bejne/qojMkJ6Mhcxlg5Y If you are looking for a Pioneer receiver with dual camera inputs Please consider Pioneer DMH-WT8600NEX seen here: kzbin.info/www/bejne/h6PZf559nLeibac or the Pioneer DMH-WT7600NEX seen here: kzbin.info/www/bejne/hWrciZ2cqr-Dqq8 or the Pioneer DMH-W4660NEX seen here: kzbin.info/www/bejne/eGO3hZmAiqlgm9U You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@drsandeeptaparia]

Can I use second camera as front camera

[@deckerdotto6035]

Please note: Not all Pioneer receivers have a 2nd camera input. What is the model number of your Pioneer receiver? You can usually find the model number on the face of the receiver. If your Pioneer receiver has a 2nd camera input, it can be used with a forward facing camera. If you want to use the 2nd camera input as a forward facing camera, I recommend to use a camera designed as a forward facing camera. For this application don't use a camera designed as a backup camera. You can learn more about Pioneer NEX in-dash receivers here: kzbin.info/www/bejne/hZPTfIutp7Nrq9U and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@noahsrebnick2424]

It seem strange thst all the NEX receivers have duel cameras but not the 3300NEX. Is this hardware or software driven. Thx

[@deckerdotto6035]

At this level of receiver, only AVH-1330NEX and AVH-2330NEX have dual camera input. Others, including AVH-3300NEX are single camera input. More videos for AVH-3300NEX can be found here: kzbin.info/www/bejne/n5O6pmOlZ82KaJY

[@Pokka676]

just installed avic8400 nex on my civic 2013 si (manual trans) originally had Navigation /premium sound. I was able to retain my factory reverse camera. i wanted to turn on the back up lines but these options arent appearing on the menu. any help would be appreciated thanks

[@pioneerelectronics]

The Pioneer AVIC-W8400NEX does not have Parking Assist Guidelines. Please be sure to install the latest firmware for your AVIC-W8400NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVIC-W8400NEX#downloads You can find a full playlist of How To videos from Pioneer for similar NEX receivers here: kzbin.info/www/bejne/rqfTY2xnZamkh9U You can download a copy of the owner's manual for this product here: www.pioneerelectronics.com/StaticFiles/Manuals/Car/AVIC-W8400NEX_OperationManual072418.pdf

[@Pokka676]

Is this really true. 8400nex is one of the flagship model: Is updating the software will add the reverse guidelines.? Thanks

[@pioneerelectronics]

@@Pokka676 Updating the firmware will not add Parking Assist Guide Lines to the Pioneer AVIC-W8400NEX.

[@richierich1169]

You have got yourself another sub. Very good videos. Thank you. I have one question that I'm getting so many answers to. I'm installing an w8400NEX into my dodge ram 2010. I've got everything. My only question is the ground. Do I wire the ground from the pioneer to the chassis or to the existing radio harness. Thank you. I hope this isn't a stupid question. Im sorta new at car stereo installs.

[@deckerdotto6035]

This depends on your install. I recommend to use the ground wire from the vehicle factory wire harness as a place to start. In most cases this will work just fine. Be sure to use a wire harness adapter for your particular vehicle. Many are available. Here is one possibility: metraonline.com/parts/MET-TURBOW Here is a video explaining the Pioneer wire harness: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI If you find you have noise in your system, or if you are installing several other items and trying to use the same ground, then I recommend to ground to the vehicle chassis. You can find more How To videos with very similar operation to Pioneer AVIC-W8400NEX in this Pioneer You Tube Playlist: kzbin.info/www/bejne/rqfTY2xnZamkh9U Please be sure to install the latest firmware for your Pioneer AVIC-W8400NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVIC-W8400NEX#downloads You can find videos about connecting wireless apple carplay and wireless android auto here: kzbin.info/www/bejne/r6Czdmqbe51nY5I and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@AshikJonathan]

Honda's Lane watch camera could be added as second camera?

[@deckerdotto6035]

To use a system similar to Honda Lane Watch, I recommend the Pioneer DMH-W4660NEX, DMH-WT7600NEX, or DMH-WT8600NEX and the use of the idatalink Maestro RR2 as a way to integrate the new receiver with the lane watch system in the vehicle. You can learn more about the Pioneer receivers here: kzbin.info/www/bejne/eGO3hZmAiqlgm9U You can see a simple demonstration of how maestro RR will operate with the receiver here: kzbin.info/www/bejne/fYmbk3iKfc-Nock You can learn more about Maestro RR2 here: maestro.idatalink.com/product/product/product_id/836 You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@mrmodass]

is camera AhD work on this Pioneer thanks

[@dirtymike951]

Does the MVH-1400 NEX also have dual camera functionality?

[@deckerdotto6035]

No. Pioneer MVH-1400NEX has backup camera input only. If you want, you could use the AV input, yellow RCA input, on the back of the in-dash receiver and switch to the AV source for a second camera input. This will provide an image, but no automatic switching and no audio will play from this source. You can find more videos similar to Pioneer MVH-1400NEX here: kzbin.info/www/bejne/lYGWkJSGebF-aKc and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@dirtymike951]

Deckerd Otto if I used the av input would it put the little switch camera button up on the screen? I know the 2330 next does that so would the 1400 do the same thing?

[@deckerdotto6035]

No. The camera switch button is part of the dual camera input system. MVH-1400NEX does not have dual camera input. If you use the AV input as a second camera it will work completely independently of the backup camera input. Using the AV input as described previously, is just a work around. There is no camera switch button. No automatic switching. Change to the AV source to see the camera, and change to another source, for example radio, to turn that camera off.

[@ravensspeed]

So do all the AVH-NEX have a second camera input or is it just certain models that do? Or do you have a list of the model that have the second camera input?

[@deckerdotto6035]

Only selected Pioneer models have a second camera input. Pioneer AVH-1440NEX kzbin.info/www/bejne/g5ncZWVqeM59sNk Pioneer AVH-2440NEX kzbin.info/www/bejne/j6mXZmCEfNataNE Pioneer AVH-W4400NEX kzbin.info/www/bejne/epiWfYeYnMmSlc0 You can find more videos from Pioneer here: kzbin.info

[@bubba69vides]

I Need help from you I got 2005 Honda Accord manual trans. But when I put my reverse the stereo don’t show anything until I do it manual on my head unit

[@deckerdotto6035]

What Pioneer receiver model number do you have? You'll need to check the Violet / White Reverse Gear Wire on the in-dash receiver. You can learn more about the violet/white wire here: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI Pioneer in-dash receivers are designed to work with the Pioneer ND-BC8 backup camera. I don’t know about the operation of other cameras. Be sure to plug the Brown camera output RCA into the Brown RCA Input on the back of the Pioneer in dash receiver. The Pioneer ND-BC8 camera needs power and ground to operate. The camera should always have power when the vehicle is switched on. And the camera should power off when the vehicle is switched off. This is very similar to the way the Red Ignition wire works on a Pioneer in-dash receiver. Just because the camera has power does not mean you are viewing the camera window on the in-dash receiver. The violet/white wire is used to let the in-dash receiver know that the vehicle is in reverse and to open the backup camera window on the receiver screen. Do not connect the violet/White wire to the camera. When you put the vehicle in it’s reverse gear, the violet/White wire should sense a change in voltage. This opens the camera window on the in-dash receiver. And closes the camera window, when the vehicle is taken out of it’s reverse gear. One possibly connection for the violet/White Reverse Gear wire is the back up lamp terminal. You can find more videos about Pioneer NEX in-dash receivers here: kzbin.info/www/bejne/hZPTfIutp7Nrq9U and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@maafeustyle]

Is there a way to automatically activate camera number 2 if we wanted to lets say do a lane change?

[@pioneerelectronics]

It may be possible depending upon the model number of your receiver and the vehicle. What is the model number of your Pioneer in-dash receiver? What is the vehicle, make, model, and year? This will require the use of idatalink Maestro RR2. You can learn more about using Maestro RR here: kzbin.info/www/bejne/fYmbk3iKfc-Nock and you can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: kzbin.info/www/bejne/hZPTfIutp7Nrq9U You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@maafeustyle]

@@pioneerelectronics thanks for the reply. The model is the dmh-wt8600nex and the vehicle is a Subaru BRZ 2015. Side question, would that model be able to use the steering wheel controls on the head unit? What other expansion parts would I need? Thanks.

[@pioneerelectronics]

The Pioneer DMH-WT8600NEX can be operated by the steering wheel controls with the use of a 3rd party adapter. If you only want a steering wheel control adapter, and no other additional functions, many are available. Here is one possibility: www.metraonline.com/part/AXSWC The Pioneer DMH-WT8600NEX has a 2nd camera input that can be activated. The 2nd camera input can be setup to operate lane change cameras on some Honda vehicles. I'm not certain it will work on your particular Subaru without some additional switching parts. This will also work as the steering wheel controls, and a ton of other things with the idatalink Maestro RR2. You can learn more about Maestro RR2 and learn more about what is possible for your particular vehicle here: www.idatalinkmaestro.com/en Please explore the site to see the many possibilities. I recommend to use the RSU2 T-harness wiring kit for the Maestro RR2 as well. You can see it here; www.idatalinkmaestro.com/en/accessory/809/HRN-RR-SU2 Important: Please be sure you have the latest firmware installed for your Pioneer DMH-WT8600NEX. You can find it here; www.pioneerelectronics.com/PUSA/Car/SiriusXM/DMH-WT8600NEX#downloads

[@rasec3377]

Can I use the stock back up camera or does it needs aftermarket camera?

[@deckerdotto6035]

The AVH-2300NEX has a composite RCA input for it's back up camera input. You can see that here: kzbin.info/www/bejne/qV61poWwqLeZe5o If you can connect the stock camera to the RCA camera input on the in dash receiver it should work. You can find more videos about AVH-2300NEX in this You Tube playlist: kzbin.info/www/bejne/hZPTfIutp7Nrq9U

[@MrLuffy9131]

@@deckerdotto6035 I have a question we installed a new AVH-2500 NEX and the stock back up camera is from a Honda Civic 2018 LX but the viewing angle is only straight down but it was possible to change the viewing angles with the stock radio but since it's a Pioneer radio do I have to buy a Pioneer backup camera?

[@deckerdotto6035]

I'm not aware of a way to change the angle of the factory camera using the Pioneer AVH-2500NEX. Other cameras might work, however, the Pioneer AVH-2500NEX is designed to operate with the Pioneer ND-BC8 camera. You can see it here: kzbin.info/www/bejne/oZiTepR9eJh9mKc Please be sure to install the latest firmware on your Pioneer AVH-2500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-2500NEX#downloads You can find more How To videos with very similar operation to Pioneer AVH-2500NEX here: kzbin.info/www/bejne/oaGuip6pYpZqna8 and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@rupkishore415]

I have iroad dual dash cam.. can it be connected to dual camera input in Pioneer DMH z5290BT ? Dash cam screen is too small and can not be seen due to sunlight, so I was thinking if I can do live view in Head unit..

[@deckerdotto6035]

I don't know anything about iroad dual dash cam. Please contact the manufacturer for more information. Pioneer receivers require an RCA video input for the cameras. As shown in the video above, the camera window can be opened at any time to view camera 1 or 2. You can see the camera inputs on a similar receiver here: kzbin.info/www/bejne/nZi5gHR7jcqdf9U You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@franciscofranco5739]

I have a dead USB port in the back of my stereo unit, any idea if Pioneer can fix that? I’ve already read on how to send it in, ect.

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver? In what country are you using this product?

[@franciscofranco5739]

@@pioneerelectronics thank you so much for responding, you guys are awesome! Model number AVH-2330NEX, I live in the United States.

[@pioneerelectronics]

@@franciscofranco5739 I recommend to contact Pioneer Customer Service for help with finding a service center. You can contact them in the US here: www.pioneerelectronics.com/PUSA/Support or by calling in the US 1-800-421-1404

[@Dude276175]

Hi. I have an AVIC-5200NEX. I can display my camera when connected to the yellow video in RCA jack but when I connect it to the brown backup camera RCA jack, I just get a black screen. Any ideas? Thanks. -Matt

[@deckerdotto6035]

You need to switch the Camera View on from the settings menu and make sure you set the camera 1-2 switch to camera 1. Here is a video for AVIC-5200NEX camera settings: kzbin.info/www/bejne/bIe8YmOreM2Biqs The purple wire needs to see a change in voltage when the vehicle is put in reverse in order to switch to the back up camera window. Check out this video for help with wiring: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI

[@lukemc1287]

Does the 2400nex have dual camera capabilities?

[@deckerdotto6035]

No. Pioneer MVH-2400NEX and Pioneer AVH-2400NEX have single camera inputs. Many Pioneer receivers have dual camera inputs including Pioneer AVH-2550NEX seen here: kzbin.info/www/bejne/nZi5gHR7jcqdf9U or the Pioneer DMH-C5500NEX seen here: kzbin.info/www/bejne/h6XZnGp-q5uoqJY You can find a playlist of How To videos from Pioneer for NEX models similar to AVH-2400NEX here: kzbin.info/www/bejne/oaGuip6pYpZqna8 You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@ninjalicorescoctelesyrecet4533]

does the avx-2500nex has dual camera?

[@pioneerelectronics]

The Pioneer AVH-2500NEX has a dedicated backup camera input. You can learn more about using the backup camera in this How To video from Pioneer: kzbin.info/www/bejne/jYqTeH-peJh0rqc The AVH-2500NEX does not have a 2nd camera input. You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzbin.info/www/bejne/gYjEipmPoJ5jf7c Please be sure to install the latest firmware for your Pioneer AVH-2500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/SiriusXM/AVH-2500NEX#downloads and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@martinstamat741]

Great video, thank you

[@deckerdotto6035]

You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: kzbin.info/www/bejne/fYmbk3iKfc-Nock and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@ernestoruesta9446]

I need to turn on a camera with the turn signals for side mirror, is that possible ?

[@pioneerelectronics]

Possibly yes, however, this depends upon a few factors. This will require the use of iDatalink Maestro RR2 used with the Pioneer DMH-WT8600NEX, 7600NEX, 6600NEX or 4660NEX. In addition, your vehicle must be supported for lane camera assist through Maestro RR2. You can learn more about Pioneer's use of Maestro RR here: kzbin.info/www/bejne/fYmbk3iKfc-Nock You can learn more about Maestro RR2 here: www.idatalinkmaestro.com/en You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@jbarah05]

AVH-2300 have the abiltiy to have the front camera option?

[@deckerdotto6035]

The AVH-2300NEX has a single camera input. That model is not shown in the video above. You can find more videos about AVH-2300NEX here: kzbin.info/www/bejne/oaGuip6pYpZqna8

[@clintonchambers1948]

So helpful thank you

[@pioneerelectronics]

You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzbin.info/www/bejne/hZPTfIutp7Nrq9U You can find more videos on Pioneer's KZbin Channel here: www.youtube.com/@pioneerelectronics

[@Spyro333777]

I wish that the camera view was set up for the second camera only and the timer is for that second camera, wherein, the camera view goes away after few seconds. Because I want to use it as a front facing camera so it goes away after a few seconds and back to the main screen when the timer expires. I hate pressing buttons so many times, causing more destruction. Having those shortcuts on the main screen was great idea, but I still have to press bunch of buttons just to get IN & OUT of my front facing camera, coz it toggles the display between front and rear cams, then get out of it than just having a timer that you could customize.

[@deckerdotto6035]

Thank you for your comments. You can find a full playlist of How To videos about Pioneer AVH-2330NEX here: kzbin.info/www/bejne/rqfTY2xnZamkh9U and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@davidham1338]

i installed this stereo into my travel trailer and want to hook up a smart dvd player so i can use the menu for netflix hulu etc from the dvd player. heres the issue i have 1 video in and 1 video out thats hooked up to my Tv and works fine, but i have no audio ports for the video in. Can what im trying to do be done? lol and thanks

[@deckerdotto6035]

The AVH-2330NEX has two different ways to input Audio and Video. 1 is the Audio Video RCA input and the other is the AUX input. The AUX input is also an audio and video input. You can see them both in this unboxing video: kzbin.info/www/bejne/q6rQoZWCeq6CqcU

[@davidham1338]

Deckerd Otto thanks I'll check.it out

[@squashboy445]

What if my camera was installed a little bit to the left how can I adjust the picture to the center?

[@wizz747]

Thank you so much matey!

[@pioneerelectronics]

You can find a full playlist of How To videos from Pioneer here: kzbin.info/www/bejne/hZPTfIutp7Nrq9U and you can find more videos on Pioneer's KZbin Channel here; kzbin.info

[@wizz747]

@@pioneerelectronics OK, thanks! Your tutorial videos are super detailed and well explained, very much appreciated!

[@ernrodri2]

I have the avh-w4400nex, it doesn't give me an option to exit while in reverse. how do I turn this on? is it a firmware issue? Thanks

[@pioneerelectronics]

Please be more specific with your question. Is there a particular reason you want to switch the camera off when the vehicle is in reverse? You can choose to switch the camera input off or, there may be another solution or work around for your particular setup.

[@k.johnsonj5338]

In reverse my camera doesn’t come on, is there a setting for that outside of connecting the purple/white

[@pioneerelectronics]

Pioneer in-dash receivers are designed to work with the Pioneer ND-BC8 backup camera. I don’t know about the operation of other cameras. Be sure to plug the Brown camera output RCA into the Brown RCA Input on the back of the Pioneer in dash receiver. You can see it in this Pioneer How To video: kzbin.info/www/bejne/qojMkJ6Mhcxlg5Y The Pioneer ND-BC8 camera needs power and ground to operate. The camera should always have power when the vehicle is switched on. And the camera should power off when the vehicle is switched off. This is very similar to the way the Red Accessory wire works on a Pioneer in-dash receiver. Just because the camera has power does not mean you are viewing the camera window on the in-dash receiver. The receiver’s violet/white wire is used to let the in-dash receiver know that the vehicle is in it’s reverse gear and, to automatically open the backup camera window on the receiver screen. Do not connect the violet/White wire to the camera. You can lean more about wiring your Pioneer receiver in this How To video: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@surfingfire479]

This work for DMH-1500nex?

[@deckerdotto6035]

I'm not certain what you mean when you say "This work for DMH-1500NEX?" If you are referring to the backup camera option. Yes. The Pioneer DMH-1500NEX works with an optional backup camera. The DMH-1500NEX is designed to work with the Pioneer ND-BC8 backup camera. You can see it here: kzbin.info/www/bejne/oZiTepR9eJh9mKc If you are referring to the Parking Assist lines shown in the video above. Yes. The Pioneer DMH-1500NEX has Parking Assist Lines built-in. They work very similar to what you see in the video above: kzbin.info/www/bejne/hZnbm393mriGirc If you are referring to Dual Camera inputs. The answer is no. The Pioneer DMH-1500NEX does not have dual camera inputs. If you wanted to, you could use the RCA video input as a camera input. You can see it here: kzbin.info/www/bejne/f2K7d6yInrmNgcU You can find more How To videos about Pioneer NEX in-dash receivers in this Pioneer playlist: kzbin.info/www/bejne/hZPTfIutp7Nrq9U Please be sure to install the latest firmware for your Pioneer DMH-1500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/DMH-1500NEX#downloads and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@surfingfire479]

Deckerd Otto thx that helps a lot. What if I buy back off camera that doesn’t have a brown A/V cord to fit to the brown plug in on the NEX? Do I just plug in the yellow cord into it and leave the red one alone. I already have the yellow and red A/V plug in source used up for videos.

[@deckerdotto6035]

I'm not an expert on a camera that's not Pioneer. The Brown RCA input on the back of the receiver is the backup camera input. Please note: You can also use the receiver's AUX input for a video input. Check it out here: kzbin.info/www/bejne/bpjNe6itdttqbrs

[@blondy2061h]

Can the front camera record? Otherwise what is the point of a front facing camera?

[@deckerdotto6035]

No it will not record unless you use an independent video recording system. A second camera doesn't have to be forward facing. It could be used as a "curb feeler" camera, a side view mirror camera, a dedicated tow vehicle camera, a cargo view camera, a nanny camera, or anywhere you might want to place a camera on any type of vehicle. You can find more videos about AVH-2330NEX here: kzbin.info/www/bejne/rqfTY2xnZamkh9U

[@HorribleHarry]

Under the front valance or air dam to make sure you don’t put it onto a curb or a concrete parking stop.

[@williamd4489]

Also good for hooking up snow plows!

[@OneManTrail]

Is there a way to flip the image on the front facing camera? I don’t want to turn right and the image show me going left.

[@deckerdotto6035]

It depends on what Pioneer model number in-dash receiver you have. What model number do you have? You can usually find the model number near one of the corners of the face of the in-dash receiver. If your in-dash receiver can reverse the image it will work as shown in this video: kzbin.info/www/bejne/bIe8YmOreM2Biqs You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@djmix74]

can you install a dash cam into this?

[@pioneerelectronics]

As of 2021 November, Pioneer video receivers are designed to operate with dedicated back up cameras. Selected Pioneer receivers will also work with a 2nd camera. No Pioneer receiver will record from a dash camera. The Pioneer VREC-DZ700DC seen here: kzbin.info/www/bejne/n2ObeXyMj6ehZs0 the camera does the recording. Video can be played back on nearly any Pioneer video receiver with a hard wire connection to the receiver's AUX input. You can find more videos on Pioneer's KZbin Channel here; kzbin.info

[@Fryerstarter]

Will this allow for Honda Lanewatch input? That's the side view mirror on Honda's. That's the only thing forcing me to use Honda's garbage touch screen head unit.

[@deckerdotto6035]

The AVH-2330NEX has one dedicated camera input with automatic switching for reverse gear and one input that can be assigned as a camera input. You can see that in this video: kzbin.info/www/bejne/q6rQoZWCeq6CqcU You can switch on the second camera at any time and it will stay on as long as you want.

[@user-hs7wg3rv5i]

The 11 thumbs down is from kenwood fan boys

[@deckerdotto6035]

You can find more video about Pioneer NEX in-dash receivers in this Pioneer Playlist: kzbin.info/www/bejne/oaGuip6pYpZqna8 Please be sure to have the latest firmware installed for your Pioneer AVH-2500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-2500NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@redbull2392]

I have the avh-2440nex with a back up camera but the parking assist guide option isn’t there. Why is that? The camera is switched on and all the function of it work but the guide lines that are there are pointed straight up and I can’t edit them.

[@deckerdotto6035]

AVH-2440NEX does not have parking assist guide lines. The lines you are seeing are being generated by the camera, not the in dash receiver. You can find more videos here: kzbin.info/www/bejne/rqfTY2xnZamkh9U

[@redbull2392]

Deckerd Otto is there a way to turn the lines off then ??

[@deckerdotto6035]

The camera is creating the lines. If the lines can be switched off that will be found in the camera settings. Please consult the camera manufacturer.

[@victorquinones3253]

Hi why in my avh-2440NEX no look the option parking assist guide.? For set the lines. This option is only with pioneer camera?

[@deckerdotto6035]

AVH-2440NEX does not have parking assist lines. If you want parking assists lines, I recommend using a camera that has parking assist lines or the vehicle's original camera. You can find more videos about Pioneer AVH-2330NEX in this Pioneer You Tube playlist: kzbin.info/www/bejne/rqfTY2xnZamkh9U and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@jonathanhawke9681]

I don’t get the option to select camera as AV input. I can view both cameras. One in camera view and one in AV. How do I fix this?

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver?

[@jonathanhawke9681]

@@pioneerelectronics I currently have a 3300. It appears it doesn’t work on this one. I have the ability to swap to a 4200, would it work on it?

[@pioneerelectronics]

@@jonathanhawke9681 The Pioneer AVH-3300NEX does not have dual camera support. To use 2 cameras with the AVH-3300NEX you'll need to switch to the AV source for the second camera. If you get an AVH-4200NEX you'll have dual camera support. You can see a video explaining the operation for AVH-4200NEX here: kzbin.info/www/bejne/bIe8YmOreM2Biqs

[@jaydoshi3578]

Please tell me best video format and resolution for full wide screen play.. when i am playing any video the black lines comes at the both side please reply urgent..

[@deckerdotto6035]

Check out this video. Watch the whole video. USB video playback is near the end of this video: kzbin.info/www/bejne/gYjEipmPoJ5jf7c Use your video encoder to change the resolution to what works best for you. Also try to change the screen aspect ratio to better suit your needs.

[@jaydoshi3578]

Deckerd Otto this video was not helpful for me, because in this video when he play video in any format the black bar coming at the both side left and right of the video. Please give me any other idea to remove those black bars and play video in full screen size resolution..

[@finfan4lyfedude599]

I have a pioneer Avh p4400bh looks smaller than the one you’re showing.. I want bigger screen..pioneer.....

[@deckerdotto6035]

Pioneer makes bigger screens. Please consider the Pioneer DMH-WT8600NEX seen here: kzbin.info/www/bejne/h6PZf559nLeibac or the Pioneer DMH-WT76ooNEX seen here: kzbin.info/www/bejne/hWrciZ2cqr-Dqq8 or the Pioneer DMH-C5500NEX seen here: kzbin.info/www/bejne/h6XZnGp-q5uoqJY You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@daddyg1335]

when i put my vehicle in reverse my screen turns black any suggestions?

[@deckerdotto6035]

Are you saying you installed a backup camera, and when you put the vehicle in reverse gear, the in-dash receiver screen goes black, but no camera image appears? What is the model number of your Pioneer in-dash receiver? Pioneer in-dash receivers are designed to work with the Pioneer ND-BC8 backup camera. You can learn more about the Pioneer ND-BC8 camera here: kzbin.info/www/bejne/oZiTepR9eJh9mKc I don’t know about the operation of other cameras. Be sure to plug the Brown camera output RCA into the Brown RCA Input on the back of the Pioneer in dash receiver. You can see it here: kzbin.info/www/bejne/qojMkJ6Mhcxlg5Y The Pioneer ND-BC8 camera needs power and ground to operate. The camera should always have power when the vehicle is switched on. And the camera should power off when the vehicle is switched off. This is very similar to the way the Red Accessory wire works on a Pioneer in-dash receiver. Just because the camera has power does not mean you are viewing the camera window on the in-dash receiver. The receiver’s violet/white wire is used to let the in-dash receiver know that the vehicle is in it’s reverse gear and, to automatically open the backup camera window on the receiver screen. Do not connect the violet/White wire to the camera. When you put the vehicle in it’s reverse gear, the violet/White wire should sense a change in voltage. This automatically opens the camera window on the in-dash receiver. And closes the camera window, when the vehicle is taken out of it’s reverse gear. One possibly connection for the violet/White Reverse Gear wire is the vehicle’s backup lamp terminal. You can learn more about wiring your Pioneer receiver here: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@daddyg1335]

Deckerd Otto yes it becomes black and no camera image appears and it’s a nex 2600

[@deckerdotto6035]

Here is my answer again. Please be sure to read the full answer. Pioneer in-dash receivers are designed to work with the Pioneer ND-BC8 backup camera. You can learn more about the Pioneer ND-BC8 camera here: kzbin.info/www/bejne/oZiTepR9eJh9mKc I don’t know about the operation of other cameras. Be sure to plug the Brown camera output RCA into the Brown RCA Input on the back of the Pioneer in dash receiver. You can see it here: kzbin.info/www/bejne/qojMkJ6Mhcxlg5Y The Pioneer ND-BC8 camera needs power and ground to operate. The camera should always have power when the vehicle is switched on. And the camera should power off when the vehicle is switched off. This is very similar to the way the Red Accessory wire works on a Pioneer in-dash receiver. Just because the camera has power does not mean you are viewing the camera window on the in-dash receiver. The receiver’s violet/white wire is used to let the in-dash receiver know that the vehicle is in it’s reverse gear and, to automatically open the backup camera window on the receiver screen. Do not connect the violet/White wire to the camera. When you put the vehicle in it’s reverse gear, the violet/White wire should sense a change in voltage. This automatically opens the camera window on the in-dash receiver. And closes the camera window, when the vehicle is taken out of it’s reverse gear. One possibly connection for the violet/White Reverse Gear wire is the vehicle’s backup lamp terminal. You can learn more about wiring your Pioneer receiver here: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@danieljung1180]

good!

[@deckerdotto6035]

You can find more videos about Pioneer AVH-2330NEX here: kzbin.info/www/bejne/rqfTY2xnZamkh9U

[@pawanchhetri2700]

It is so frustrating that the back up camera shows mirror image. Whats the point of mirror image, it confuses so much while parking your vehicle in reverse. I couldn't flip the mirror image😠😡🤬

[@pioneerelectronics]

It sounds like you may be using a forward facing camera as your backup camera. Or you're not using the Pioneer receiver's dedicated brown backup camera input. Pioneer receivers have a dedicated Backup Camera input. The Backup Camera input is designed to be used with the Pioneer ND-BC8 Backup Camera. The ND-BC8 is a Rear Facing Camera. If you use a forward facing camera in the backup camera position it will display a horizontally flipped screen, not a mirrored screen. You can learn more about the Pioneer ND-BC8 in this unboxing video from Pioneer: kzbin.info/www/bejne/oZiTepR9eJh9mKc Pioneer in-dash receivers are designed to work with the Pioneer ND-BC8 backup camera. I don’t know about the operation of other cameras. Be sure to plug the Brown camera output RCA into the Brown RCA Input on the back of the Pioneer in dash receiver. The Pioneer ND-BC8 camera needs power and ground to operate. The camera should always have power when the vehicle is switched on. And the camera should power off when the vehicle is switched off. This is very similar to the way the Red Accessory wire works on a Pioneer in-dash receiver. Just because the camera has power does not mean you are viewing the camera window on the in-dash receiver. The receiver’s violet/white wire is used to let the in-dash receiver know that the vehicle is in it’s reverse gear and, to automatically open the backup camera window on the receiver screen. Do not connect the violet/White wire to the camera. When you put the vehicle in it’s reverse gear, the violet/White wire should sense a change in voltage. This automatically opens the camera window on the in-dash receiver. And closes the camera window, when the vehicle is taken out of it’s reverse gear. One possibly connection for the violet/White Reverse Gear wire is the vehicle’s backup lamp terminal. You can learn more about wiring your Pioneer receiver in this video: kzbin.info/www/bejne/Y5OpZKiwr8aHaZI and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@pawanchhetri2700]

@@pioneerelectronics thank you so much for your in-depth explanation. Yes I am using the after market back up camera with my Pioneer head unit. I will check all the wires one more time as you have mentioned. In addition i will follow up your referred videos for more information. Thank you so much for your prompt and very informative reply. Keep up the good work 👍👍

[@khrissingh_spooling4life212]

Is possible to add a front camera on the 3500 Nex model? Will the same process work?

[@deckerdotto6035]

The Pioneer AVH-3500NEX is designed to operate with a backup camera only. The 1>2 switching you see in the video above is not part of the AVH-3500NEX. You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: kzbin.info/www/bejne/n5O6pmOlZ82KaJY and you can find more videos on Pioneer's KZbin Channel here: kzbin.info