How To Fix Key Ignition Switch Problems on a 2007 Chrysler 300 & Save AT LEAST $600!

Courtesy of Fred's Auto Waco, Texas: Quick Fix; Forget the Headaches & Save Hundreds! How to fix key ignition switch problems on a 2007 Chrysler 300. (c) 2017, FRED'S AUTO REPAIR. (c) 2017, DR/PR AGENCY. All Rights Reserved.

[@ruthboettger83]

This is 8years after you posted this video and it helped us today! Thank you and am very grateful to have come upon this!

[@big131]

Saved me a big headache, mine broke in the grocery store parking lot, was about to tow and bring to the shop until I found this video, fixed at the store. Thanks and God bless

[@shouldbsleepin]

Used your video to fix my 2007 300. In a parking lot. Ty for the help! Saved me time and $$.

[@JasonMcreynoldsGooglePlus]

Thanks! I've had this issue for a while and this was a quick and easy fix. No more issues starting the car!

[@PBShuttleworth]

It worked on my 2007 Pacifica! Thank you so much for the video!!!

[@nelsonricardomontalban1780]

Great video simple and easy to follow..Thank you.

[@CurtisMandeville]

This video helped out a lot. Thanks for making it.

[@PRyMEvilProductions]

Thanks for the upload. Very helpful!

[@joseburciaga2883]

Great video had the same problem, fix it my self pay $ 50 for the actuator at autozone!thanks

[@juanhinojosa3293]

Hey amigo

[@thedrumcartel-HQ]

Thank you for your help!

[@juanhinojosa3293]

I fix my car have the sane problem tank you for explain 😀

[@athletespiderman1003]

Would this also work if the car key won't come out?

[@mr.juancho6492]

Hey freds auto i have a 2006 chrysler 300c and its having kind of the same problem but wat mine does is that when u turn the key to start it everything goes off but battery is good and i have check all relays and i also call a electrician and its not the key but i still cant find the problem do u have any idea on wat it can be??

[@JDigger7777]

Will the original keys work with the new switch or do you get a new set of keys that have to be programmed?

[@fredsautowaco744]

we did not change keys; original keys were used both before and after the process. thank you! let us know if you have any further questions.

[@JDigger7777]

Great! thanks!! Ordered the part and had it shipped over night, should be here tomorrow, and will try to fix it this weekend. I have the same year, make, and model so should be fairly simple following your video. Thanks for posting. Dealership was going to charge me $700-$800 to fix. Part with overnight shipping cost me $39.

[@fredsautowaco744]

Please let us know when you finish repairing your vehicle and subscribe to our channel. Tell your friends and absolutely be in touch. If you have any specific questions regarding any vehicle whatsoever please let us know!

[@johngoldacker8881]

I was able to install the new ignition switch actuator and it works but I can't get the car to start. I turn the key over and get one click like it's making contact but won't start. Almost as if the battery connection isn't making good contact but that's not it because I've checked everything and I have plenty of power to everything, windows, seats, lights, etc.... I've also gone through my ignition switch connections twice to make sure I didn't forget to connect anything and don't see anything that was missed. I did however go one step further disconnecting things than your video doesn't show and didn't realize it until I was going through it again. I disconnected the power connection by pulling out the red tab and disconnecting that wiring harness from the back. I wouldn't think that would have created any issue with it unless it resets a security feature or programming of the keys?

[@fredsautowaco744]

First question: was the old actuator broken when you replaced it with the new part? Second question: can you get someone to lay under the vehicle, find the starter, and tap on the starter lightly with a hammer while you try to start it to see if it will engage? MAKE SURE THE CAR IS IN PARK WHEN OR IF ATTEMPTING THIS TEST AND MAKE SURE SOMEONE IS PRESSING ON THE BRAKE AS WELL. If the actuator was not broken prior to replacement, it's highly likely that the starter is the source of your problem. Truly hope this helps. Let us know and thank you for tuning in!

[@RSL_Louie]

I really need help with my Chrysler 300

[@anandasene]

bad sound comes.