How to Fix P0113 Engine Code in 3 Minutes [2 DIY Methods / Only $7.76]

[@nondainc]

Hi, I'm Steve, nonda's lead mechanic engineer. Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!

[@markgarduno4597]

My niece's 2014 Honda Accord gave a P113 code fix, indicating it needs the intake flow sensor replacement. Checked the Air Filter and is super clean, so I'm thinking of replacing it today.

[@huntergoss8174]

Hey so I have a 2000 ford f150 4.6 and I'm having the same problem with the po113 code I replaced the maf sensor and the iat sensor and my air filter is clean but yet I'm still having a problem also I did notice that my abs light is on too

[@spellbreaker6609]

the P0133 code is permanent code and cannot be removed right?

[@sirchristopher7684]

I forgot to clip mine back in after changing my alternator out. Thanks!

[@jorgemora7190]

Very well job very inf thakns for your time we need this inf

[@nondainc]

thankiou!

[@imrxnz2531]

When my car broke down two days i could turn on the engine and idle but when gas was pressed or tried to move it would lose power would start sputtering before turned off completely .. after many attempts its lost it's power to even turn engine on.. i thought my fuel pump died but i just scanned and these codes came up...what should i do? Btw My engine light isnt working so would the scanner detect if fuel pump was the issue?

[@samwarburton2672]

Hi did you manage to find out what caused it? I'm having the same issue

[@imrxnz2531]

@@samwarburton2672 yes. It was the egr valve. It was stuck open due to carbon build up

[@samwarburton2672]

@imrxnz2531 sorted mine too, it was the high pressure fuel rail sensor.

[@DoyleFM]

My 2008 Elantra has been a great car EXCEPT for TWO, CHRONIC problems. 1) The A/C control has always acted up. 2) It NEVER passes its emission test. 🤬 I bought it new & it 308k miles on it today but those two problems have always plagued it. Thanks for posting this. I will look into both possibilities & if I don't forget, I'll follow up with a subsequent comment. 👍🏻 🇺🇸

[@nondainc]

Hope it helps!

[@Tipperary757]

Thank you!

[@muhammadmusdaphamahamuud4170]

I like the program .ithanks to god for ever

[@nondainc]

Thanks for watching, Muhammad!

[@redinstrumental7535]

Might be robotic but good information 👍

[@nondainc]

Thanks for watching!

[@michaelshrader5139]

What has air filter to do with intake air temp sensor? Nothing! And if this sensor is unplugged or not working, your vehicle will read -40 for the intake air temp and will be stuck in Open Loop mode , at least that's what my GM truck does.

[@nickaustinnoble]

I replaced maf sensor iat sensor and air intake. The code was gone for like 2 months now it comes back every day even after clearing the code

[@nondainc]

Hi Nick, please provide us with your vehicle's year, make and model.

[@nickaustinnoble]

@@nondainc it’s a 2003 GMC Sierra 1500 with the 5.3 the maf and iat are all one unit

[@nickaustinnoble]

@@nondainc my guess is the the new maf/ iat sensor already failed I bought it on rock auto an they had like 4 different brands of them so I might try a different one

[@nondainc]

Hi Nick, please thoroughly inspect the wiring/connections from the PCM to the IAT sensor for any issue. Check your air filter if its clean and change if its not.

[@juliolombera2856]

I have a mustang gt 96 4.6 my car gave me this codes I replaced both mass air flow sensor and the IAT sensor as well but code still comes back I replaced my 02 sensors as well cause I was receiving lean on bank 1 and am not sure if it was also showing me bank 2 I need help lol I know if I take my car in they would try ripping me off

[@nondainc]

Hi Julio, have you inspected all the wiring related if there are damage/corrosion or if there's improper harness connection?

[@zkmoonea]

you need to take your car to a mechanic, and ask him to test wires.

[@j.gtheautotech8455]

Why is the scanner for free?

[@nondainc]

Hello, we're giving away our ZUS Smart Vehicle Health Monitor Mini as part of our 5th anniversary celebration.

[@timberwolfdtproductions3890]

Why the robot voice?