How to FIX your Bricked GPU BIOS - Bootable DOS Drive Method - HD6950 failed flash to HD 6970

locally.link/NSET - Check out the B550 Steel Legend on Amazon
Hey folks, this video takes a look at how to fix a GPU that has been bricked by mis-flashing.
The test card is a AMD HD6950 which the previous owner tried to flash to a 6970 on BOTH bios chips.
The card would only display to a black screen and no windows based flashing apps would solve the issue.
To fix this, Im going to show you how to create a bootable USB DOS drive and flash your AMD or ATI GPU from that.
This allowed me to fix BOTH bios chips and get the card working again!
Downloads Required:
Your GPUS bios - www.Techpowerup.com/vgabios
ATIFLASH - www.techpowerup.com/downloads/2230/atiflash-4-07
RUFUS BOOTABLE DRIVE TOOL - rufus.akeo.ie
please note that this is for AMD and ATI cards only. There is a similar tool called NVflash for nVidia Cards and the methodolgy is the same.
While your at it, check out some of the affiliate links below to some kit I've recently looked at.
locally.link/QSS4 - MSI B550i Gaming Edge WIFI ITX board
locally.link/OGTk - Drevo Blademaster Keyboard
locally.link/TngV - Gigabyte M27Q 1440p / 170Hz IPS gaming monitor
locally.link/4OH0 - ASRock B450 Steel Legend - ATX
locally.link/FwtE - ASRock B450 Steel Legend - Micro ATX
locally.link/NSET - ASRock B550 Steel Legend
locally.link/IVoN - ASRock B450 Gaming ITX Motherboard
locally.link/z5IK - Drevo Falcon RGB Gaming Mouse
Check out the Nitro+ 5700XT on Amazon - amzn.to/3a7HTjL
Check out the Challenger 5700XT on Amazon - amzn.to/3bideBT
Check out the RTX 2060 Ventus OC on Amazon - amzn.to/3eNbene
Check out the RTX 2060 SUPER Ventus on Amazon - amzn.to/3bz6QGq
Metis Evo on Amazon - amzn.to/3bgSiKo
Sub £20 CPU Tower Cooler - amzn.to/3bfxV0i
If you want to see the coding for nVidia cards leave a comment and if there is demand, ill make a nVidia Specific video.
Music by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

[@TAGMedia7]

A clear, concise tutorial with no nonsense. Good show, sir, and thank you!!!

[@pilof682]

Thank you so much, you saved me. I just managed to recover a new video card, 7 days old, to which I had corrupted the bios. thanks to this video of yours I solved everything

[@davideverett2]

A useful, well explained instructional video, Thanks a lot.

[@F7GOS]

+nasha thedog your welcome, hopefully it helps some gamers and builders out there save some money and their GPU!

[@AeroFix94]

Thanks man. You saved my HD 5970!

[@remynisce33]

Thank u! I haven't tried yet but this gave me hope!

[@doorguru168888]

Something finally worked for me! Although my MB did not have onboard graphics, I used an older 9800 GT GPU (needed no additional power connections), plugged in along with my problem GPU. That old 9800 GT GPU is a great tool to have for situations like this and others.

[@rumbodeglasas2797]

this comment saved my so i can use two ore more GPU's in a system and the bricked one is gona have its bios flashed along with this guide your comment saved me thank you

[@leonnn76]

Thank you very much, excellent tutorial, In october of 2021 still works like a charm

[@vanwilson4025]

Thanks, best instructable for gup's I've ever seen. Thank you!

[@matko350]

Thank you very very much :))))) This tutorial was the best so far and it was easy and understandable so like from me. I succeded after few failed attempts but those fails were just because I haven't found the right bios in first attempt And ofc I am commenting from/with unbricked card and the feel I got after succes was like a ton of bricks felt of my chest :DD To others if the message "this program can't be ran in dos mode" just use specifically atiflash 4.17 (it worked for me at least) and if there is anymore problems just seek an answer in comments and answers to them. P.S. NEVER EVER FLASH YOUR GPU IF CARD WORKS FINE AND THERE IS NO NEED, and if there is need to do that just leave it to pros pls ;)

[@kevinpeterpinili6237]

what error did you get when you knew it wasnt the right bios?

[@lucasminotto]

Thanks a lot, man! You've just saved my RX 480 from a bad windows bios flashing! Love You!

[@ermalshala8383]

In my pc got like this setup cannot run in DOS

[@GravityBlood]

@@ermalshala8383 i think it have to do with UEFI / Legacy boot option. new pc mostly set to working on UEFI(only) by default so you have to work around and manage the boot option to work with Legacy

[@sandinodelavega9042]

Thanks! That was easily understood! Help me a lot

[@jornove]

You just saved a HD6870, much love to you!!

[@mightymartin6290]

For those who cant flash their 2015 AMD gpus, try older AMdflash for dos from 2016 year, it worked for me, the newer versions were putting the newer bios already programmed error... Hope it helps!

[@Locccccccccccccccc]

I personally don't have a bricked GPU, but I'm going to like this vid and bookmark it for future reference (could possibly save a lot of money on future builds as a result) Very clear and thorough, I found your video very easy to follow. Your voice, while slightly muffled, was oddly relaxing. Your other videos also seem to follow this trend - keep up the good work. You have earned yourself a new subscriber.

[@F7GOS]

+SvenLock thanks, I agree, think I need to invest in a new microphone! Thanks for the feedback.

[@ebutuoytm7560]

I know this is a fairly old video but you have just saved me from a major headache after flashing the wrong bios on an old Radeon. Thank you so much it worked perfectly!

[@Delusiox]

When do you unplug and replug the gpu in...Does the gpu need to be in the whole time? Just the display cable not into the gpu at first(when using integrated gfx)

[@Br41th]

Thanks a lot, fixed my R9 270. Couldn't get the latest atiflash to work so used this version (4.17) and had no problems. I will also add that if your PC doesn't have an onboard GPU it doesn't matter, just create the boot drive on a laptop or another PC

[@gaby9517]

And how do you run it without display?

[@JesusChrist-sx1lf]

You still need onboard graphics to display DOS after booting it from a USB.

[@01matic]

Thanks man. You saved my msi r9 390

[@FunDumb]

I plan on trying this with my RX580 when I get home. So very grateful, even in 2021!

[@tomsmith8478]

Hey did it work? I have a rx 580 to and I’m wondering if this works

[@AhmedSayed-yp9jk]

@@tomsmith8478 did it work ??

[@biddock1]

Thanks alot saved me big time.

[@bootsmanaa]

This tutorial is awesome, managed to revive my card al the while having the newest bios on it, so cool

[@ivan021091]

Thank you sir, you saved my bricked gpu! God bless you.

[@jaylord55]

good to know it works lol Plan on flashing my 3080 trinity for resizable bar. Hopeing noting goes wrong

[@tripledeuce7620]

Yooo thank you very much, I was flashing my gpu bios and apparently I messed up trying to mess the fan control and it bricked my gpu. I have an GIGABYTE AMD R9 390, also I changed the voltages.

[@TheLouloux]

thank you hero ...I was thinking about throwing it

[@brandonosborne6894]

I love these kind of videos.

[@F7GOS]

+Brandon Osborne thanks :)

[@brandonosborne6894]

Saving tech that seems broke to most but actually isn't is a favorite hobby of mine.

[@F7GOS]

Brandon Osborne it sure is a great feeling picking up something that someone has broken and fixing it!

[@brandonosborne6894]

Water damaged phones are one such thing I've taken pride in by replacing some of the board components

[@DescomplicandoHW]

Worked, many thanks

[@marcuscustodio9338]

Thank you so much Dude, you are the best! Cheers!

[@dspradio1182]

Thanks to you i got an msi gaming x RX580 8Gb gpu for only $15

[@smokegames1179]

how thefuck

[@Th3Min3rLP]

Dude, i love u so much seriously just saved My life haha

[@mobiledesignofficial]

Its 2021 and you're still saving GPUs with your video. Just saved my RX 570. Thanks you're going to heaven.

[@F7GOS]

glad it helped

[@vrushabkudchi5328]

@@F7GOS please can uh help meh how can i do the same thing to my laptop my laptop gpu is not working maybe changing the bios will help when i tried tht method which uh showed i cannot find my bootable pendrive so i cannot boot from it can you please help meh

[@capinasam]

Please help i cant save my rx590 gme. I tried it but it always says “adapter not found” please help

[@victor00123q]

Thank you! This saved my R7 260X GPU! You rock! =D

[@F7GOS]

Glad it helped 😂👍🏻

[@TheNike0223]

You and Random gaming are the best tech channels on you tube :D

[@jimmykannibal9901]

I knew there was a way to fix my gpu using the onboard! (instead of using a double gpu mobo, as EVERYBODY SAYS). Tnxx dood! I just revived my AMD HD 6570. Easy, quick and simple to use. Best method.

[@tobedecidedstill6270]

You sir, are a legend among men! Saved my r9 390 xoxo

[@F7GOS]

+Julian Giraldo long live the 390!

[@techquire]

I LOVE YOU SO MUCH THANK YOU . THIS IS ONE OF THE ONLY YT VIDEOS THAT ACTUALLY HELPED ME IN NEED . THX SOOO MUCH

[@FuvkSadistic]

Does this work on win 10

[@techquire]

@@FuvkSadistic it works on any windows os, you can probably do it with linux if you find a bootable usb maker for dos

[@mateocvetic9621]

Hi, when I'm trying to flash my r9 390 I always get error 0FL01 after the last command

[@hansonic]

Thanks dude, I've revive my HD7750. Just got igpu then I can proceed😂

[@Paranoidhit]

Hansonic how did you do it I could save my 7870 can you help me

[@frankfortfcgoc]

2022 this tutorial just gave life to my bricked rx 570 I was gutted couldn't afford another gpu you just saved me big time

[@eternal_stoic_]

did you had to short pins 1 and 8 of the bios chip to reflash? what version of atflash did you use? did you flash it usind DOS?

[@frankfortfcgoc]

@@eternal_stoic_ didn't short the pins, use a stock bios for your make and model from techpowerup and a USB drive was very easy

[@ermalshala8383]

@@frankfortfcgoc what version of atiflash ?

[@frankfortfcgoc]

@Ermal Shala can't remember just a standard version, it's not really needed just reflash the bios to stock from a techpowerup file make sure it's the exact bios that matches the card. If you need to know more let me know. Don't even think I needed to use ati flash in the end and I've flashed loads of cards in the last year. What's the issue with the gpu

[@tyt09]

I will try ! Normal ati flash didn't work for me the last time i tried . Thanks for the video!

[@jacoblane8635]

So even with switching over to integrated graphics, when my house is plugged in the system still stays on a black screen.

[@anwarscommunity6355]

did you plug in the screen in the mother board instad of the gpu it self after doing that ?

[@moh4del]

Hello! I got an important note for everyone, if you happen to own a GPU that could have maybe different variations of the exact same brand, for example my Sapphire RX580 Nitro+ has two different variations with differing VRAM modules, make sure you find out which one is exactly yours, because different components have different BIOS settings. In case you're unsure which, feel free to look up on the internet using your exact serial number or product number on the box.

[@GodSaveTheUnitedStates]

My Gigabyte rx580 8gb gaming is just like that. Three different ram brands.

[@neildiamond610]

How do I look that up?

[@dspamers]

I have a couple RX570 4G GPUs that have been flashed with the 8G version of the bios. When I boot up with them as display card it show me the bios boot screen, but as soon as an operating system loads the screen cuts to black. I've flashed the regular 4G version back with atiwinflash, but it still does the same thing. Could this method help or should I look elsewhere for the problem?

[@zuhaibahmed2700]

You sir are a legend and just saved one of my 580s

[@4ipon4ik]

Why just one? Only one was bricked?

[@itubeyourass]

the unbricking is strong with this one ! i got 2 bricks i`l unbrick them in the morning. thank you my good man !

[@Coaxs94]

SOLUTION FOR ALL OF YOU THAT HAVE " CANNOT BE RUN IN DOS MODE" ERROR. The thing was to use an older version of atiflash.exe provided on this site www.techpowerup.com/download/ati-atiflash/ I used bios.rom that I saved (bios.rom for gpus on that site can also be used for specific cards) before I fu**ed everything up, and I re-flashed gpu bios just like in the video and it was successful, gpu is now working! Thanks F7GOS ! Peace! :)

[@gucciquattro]

so i am using nxflash so what can i do with this same issue.

[@Coaxs94]

gucciquattro Can't run in dos mode issue? If yes, try older version of the app.

[@IamCraduug]

Aleksandar Supurovic thanks! Was wondering why I couldn't flash

[@csabi72]

still can not run in dos...

[@jseen9568]

My gtx 970 will boot into bios not Windows. It was prior to the latest nvidia driver update. Do you think this will work if I make the bootable usb on my laptop then go into the bios of my pc as you've described? (AMD cpu and 1 pcie slot so no other graphics options)

[@mauroo339]

hello,are the commands the same for nvflash?thanks for your video,mauro

[@bz6618]

So i loaded a hynix mod on a mron gpu by accident since I have more than one gpu and they are all different. Good news is the fan still spins when I turn on the PC but I do run into the “Adapter not found“ Error 0FL01. I tried the 2 monitor trick but it didn't seem to work either. My pc won't run windows either it just keep restarting the computer if I don't run it in DOS

[@RD-gz2tr]

Hi, thank you for your video. I tried your way but my computer shows “ you cannot run program in DOS mode” what should I do. Thank you

[@vrushabkudchi5328]

Did i figured it out please let tell meh

[@RD-gz2tr]

@@vrushabkudchi5328 Not yet

[@vrushabkudchi5328]

@@RD-gz2tr my gpu is not working at all idk what should i do

[@Parmpita]

You need to download dos version for the same

[@Alpha-ms9nj]

Just wanted to say thanks for uploading these instructions that helped me save 2 AMD GPU cards today.

[@connorgoodwin894]

Wanting to try this for a bricked GTX 970. But noticing that it mainly works for and cards. Is there a way around for Nvidia cards? Or with atiflash work on them too?

[@MrHedgehog69]

damn i have reacerched for 5 hourers how to fix my bricked card and this video have helpt me even after 6 jears from launching thank you so much

[@CXLH]

I owe you countless . you saved me and my card :D

[@F7GOS]

+CXLH glad to be of help :)

[@badrhary4984]

Brother i have this problem during proces-error 0FL01 adapter not found.Please help.tks

[@VictorSantos-ey5zm]

I have the same problem, did you manage to solve it?

[@Antoeknees]

hey man this method would only work if you have integrated graphics right ? because i dont have one on my cpu but i do have a backup gpu

[@Savirezz]

My RX 480 are now working again. Thank you so much. I was just about to sold the gpu as a brick lol.

[@markustrosterud6834]

Bruce Wayne can u tell me how u did it?

[@Savirezz]

@@markustrosterud6834 If your CPU have an integrated graphics, you can plug the HDMI cable to the motherboard, got to the bios and set it as primary display. When you get to the desktop just flash the gpu with it's original bios.

[@AkteGames]

At first, thanks to you. I have a question, by me it says “Adapter not found“ Error 0FL01. So what is wrong there?

[@DancingGophers]

Maximilian König i get that too

[@andrespuerta6103]

no one know how to fix it?

[@RadioFlyer05]

after hours of trouble shooting I found out you can fix it by using your integrated gpu and run atiwinflash and do shift right click to access command prompt and do "atiwinflash.exe -f -p 0 bios.rom" before you do that though make sure you have 2 monitors one plugged into your mother other into your graphics card.

[@MarcABrown-tt1fp]

Adapter not found? Anyone know what's up?

[@reggiexp69]

@@MarcABrown-tt1fp same problem here

[@EvinSetya]

Iam sorry i cant install atiflash.exe. i got "this program cannot be run in dos mode".can you help me

[@kakazouheinou4923]

same

[@atsrasta9688]

U downloaded the wrong atiflash, you need to download dos version not windows, there are different versions

[@sebasluna7371]

CHANGE NAME EXAMPLE: BIOSS.EXE (DO NOT PLACE .EXE JUST PUT BIOSS) SO I MADE IT WORK

[@robbys929]

thx a lot I had to do what you said in command prompt because I got an error but thanks so much you really saved my ass.(you get a sub and a like :D)

[@iraklivardiashvili7413]

Thank you so much 🥰 You made my day 🤩 27.12.2021

[@TheGamingTundracool]

I was freaking out until I forgot that my TV was off

[@spl1txx]

Lol

[@averyoldYoutubeuser]

Nice joke : )))

[@vikingredbeard9872]

I got adapter not found

[@Marth3791]

thank you very much.it saved my winter holidays

[@F7GOS]

+Marth3791 glad to help :)

[@jameslong6529]

Can you please help me when I type atiflash.exe it says error opening flashrom.rom what did I do wrong. Please help

[@thomas4326]

I have error message: ERROR 0FL01: press '1' tout continue What is this and I van resolve it? THX

[@Kebsilfer]

I have the same error

[@thomas4326]

I went to see a repairer and he say me "the own solution it's remove the EPROM and reprogram it ~150€

[@PavelPower]

Did you ever figure this out? I get the same error.

[@maykelkero5654]

This worked for me after getting that error: Make sure you have integrated graphic turned on in bios like he shows in video. turn off computer and remove gpu. remove the usb dos stick, you don't need it. Now you should enter windows and remove all graphics drivers with the program "Display Driver Uninstaller". Now turn off computer and insert bricked gpu. if you are able to get in windows then you will be fine. Now just use the normal/new atiflash tool to flash your gpu with the old bios. then run the program "amd/ati pixel clock patcher". reboot and install amd blockchain driver.

[@maykelkero5654]

yeah it does

[@nikolajsrubaniks9720]

👋Can 🙏 someone help me,🙏 i cant really turn on my monitor if my r6950 and integrated cpu graphics is pluged in, so i plug my gpu only after my monitor starts working, then when i type in that "-f -p 0" part, it shows me that i have problems with adapter... Can someone help please!!!

[@xnicob]

same here. "adapter not found"

[@weehong2000]

same here "adapter not found"

[@Abhilash716]

Same here anyone got solution for this?

[@williamgallan7573]

I've got this far and am also getting "adapter not found", guessing it can't read the gpu. Odd as it shows up in windows, just doesn't want to flash anywhere!

[@stefanpopa5830]

can i do the same with this atiflash ( dos version) for a vega 56 red devil ? i ve seen one on second hand for cheap with the error 43 in device manager and the guy said he could not install the drivers . So idk if this is going to work

[@pranavan5803]

great video... thanks m8

[@lilnondo]

It says program can't be ran in dos mode plz help

[@nuffsaidbaby5800]

Unknown Vibbez same problem did you solve it?

[@danielspartan7754]

nuffsaid baby Make sure you select older versions and get 4.17. Had same issue but noticed when he made the usb the exe was twice the size. If you need help I can assist

[@Bengzki17]

same issue how to fix it?

[@danielspartan7754]

Mar Unknown on the left side of the page make sure you select the older version of the file. The latest versions don’t work

[@Bengzki17]

i got it but when i try to flash the backup bios it say adapter not found do you know how to fix ?

[@theexperts.........755]

When I type atiflash.exe And error command not found

[@Punchmememe]

Did you had eny Head Laters like this H

[@sj3615]

Bro you are a legend for helping us Bro I appreciate u Bro thanx.. I almost gave up on my card and u saved it🙌💯

[@Amro-Omran]

Perfect thank you very much it works with me

[@Saradomian]

this only works if your CPU has graphics, check your CPU first

[@zudanjanuardi6992]

it says adapter not found, what should i do?

[@M4G1CSKILLZ]

I got the same issue :( were you able to fix it?

[@Delusiox]

Should I plug the 8 pin connectors in as well because it does not start then even with IGP settings enabled and hdmi in the motherboard....( 2:12 )

[@JYGilgamesh]

You just won the internet sir I was about to lose all hope thank you!

[@MahmoudFaysal]

amdflash -i >>> NO ADAPTER detected :(

[@tulza189]

Hi, did you found a fix?

[@amazingright7240]

@@tulza189 try 1 instead of 0, if that doesn't work your bag bios is damaged and your card cannot be recognised

[@motiongems7947]

​@@tulza189 i spend days trying every syntax on amdflash, it always show "adapter not found"

[@behagaming6670]

Is there a solution?

[@PizzaInGame]

Same here, and i found is because the old one 4.17 cant run at newer 64 windows And i think the newer atiflash already have fitur like in the video, without need to use DOS mode In fact they have same script and the newer one cannot run in DOS mode You just need run cmd administrator Sadly this is not fix my problem 😢 Maybe need use hive os or even reset the ic 😔

[@amadeusjungster4781]

Hi guz, with "C:\>atiflash.exe -f -p 0 bios.rom" comand I get "Adapter not found" but my bricked card was already connected.

[@arkeemj336]

I am also getting the same "adapter not found " Error 0FL01 : press 1 to continue after attempting the fix.

[@arkeemj336]

Forgot to list my card info. MSI RX570 Gaming X

[@Diegoexgamer]

Thanks alot, you saved my gpu.

[@coffeerage666]

Finnaly i got this video. Thx so much sir

[@TsunaXZ]

I bricked my RX 460 luckily i have APU from AMD.

[@enesahmetovic6255]

Adapter not found error 0FL01 press 1 to continioue??

[@MinersTube]

Same for me

[@capucom3297]

@Infinite Fairlight How do I do that?

[@Trent_111]

CapuCom it’s somewhere in your bios. You can access your bios by pressing f2 or f8 depending on your pc. But every bios is different so you can google where those options are

[@Trent_111]

CapuCom also you’re PCIe slot might not be compatible with your graphics card bc they aren’t backwards compatible

[@capucom3297]

@@Trent_111 I don't think so, I used the Rx 570 for 5 months in the motherboard I still have nowadays.

[@katakouzinos1000]

Thank you a lot m8 ... i did what you said and worked but inside windows didnt need to make usb boot disk

[@zolwio127]

you are awesome! fixed!

[@3800S1]

what happens when you don't have an IGPU and the pci won't work while you have the bricked card installed?

[@kennethcusmano]

Bro i had to start the pc with just pci card not the pcie. Then booted and start windows. Then shut down and put im pcie card with pci still as gpu. Then when i saw graphics about to show i plughed on the power pins. Warning try not doing that at least 10 times before you do try it. And still it may not be recognized. Then i had to flash the bajesus out of it. I flashed like 3 times while still running on the pci card. Then eventually it recgonized it and i shit down took out pci card and ran off pcie and then i still flashed it like 4 more times. Boom worked for me. Good luck.

[@dbotz1]

It says adapter not found. Error 0fl01. What do i have to do?

[@user-wf2ek8hz8g]

@Lenny faZe did you figure it out?

[@ARISTOCAT666]

@@user-wf2ek8hz8g did you figure it out?same problem

[@naveedhussain6309]

@@user-wf2ek8hz8g is it resolved? Facing same error.

[@naveedhussain6309]

Facing same issue... any solution

[@YoungBloodyBlud]

www.reddit.com/r/EtherMining/comments/7qifnc/atiflash_failed_to_read_rom_error_0fl01/?

[@GodSaveTheUnitedStates]

Figo, this short video just saved my RX580 from my incompetence. Thank you for your tutorial.

[@Mirufy]

When in igpu does your device manager detects the gpu?

[@alitantan6655]

help pls adapter not found eror

[@AmitYadav786]

any solution you found?

[@kannonfrazell4628]

Amit Yadav swap the card to the other PCIE slot. It helped me

[@ventricity]

This worked for me after getting that error: Make sure you have integrated graphic turned on in bios like he shows in video. turn off computer and remove gpu. remove the usb dos stick, you don't need it. Now you should enter windows and remove all graphics drivers with the program "Display Driver Uninstaller". Now turn off computer and insert bricked gpu. if you are able to get in windows then you will be fine. Now just use the normal/new atiflash tool to flash your gpu with the old bios. then run the program "amd/ati pixel clock patcher". reboot and install amd blockchain driver.

[@RealNicsam]

Johan Herstad THANKS MATE ur awesome. Just using display uninstaller worked perfectly for me. Ur the best!

[@dominikgoluza5911]

Johan Herstad what version of amd/ati pixel clock patcher you use,because for me it error program can't run in dos mod

[@cesarmcfly2122]

Hey this seems very helpful but i dont have integrated graphics configuration need help please

[@22koga]

he told you what to do use a pci gpu card and if laptop you have to use a clip on the chip

[@dddiehard02]

@@22koga i have a second pci express gpu, can I use that?

[@hustensaftmeister]

@@dddiehard02 i think so

[@nightshade1487]

i am going to update my gpu and thought a backup plan might come in handy thanks

[@Mattjameswill]

Omg you’re the best!! Revived my rx580 8gb 😅

[@muhammadxeeshan9145]

error 0FL01 ? please help

[@UnBlank07]

Same on mine

[@razercloud5650]

Same

[@destruktors]

Same s#it

[@ruivarandas128]

Please guys i have the same issue. Please.

[@ruivarandas128]

F7GOS can you help us? -f option not support in external version of the tool. ERROR 0FL01

[@DarrinsChannel]

hey i did everything and i got ERROR 0FL01 PRESS 1 TO CONTINUE ????

[@TehUltimateSnake]

Darrin's Channel same here. Did you ever figure it out?

[@cosminthunde]

Same

[@Mboy556]

Darrin's Channel isn’t ATI for amd only? Do you guys have Nvidia gpu?

[@lewl4566]

@@Mboy556 I am with AMD and I still got the same error...

[@Mboy556]

@@lewl4566 ohhh well in my example I had Geforce.

[@ERAQI]

Thank you very much your tutorial helped me reviving my rx470 i almost lost hope

[@skertel]

You are a life saver!!! 🙏🏽🙏🏽🙏🏽

[@frr3y643]

i'm getting error 0fl01

[@manuelhernandez2017]

Same here, it means the adapter is not found. It doesn't detect the card at all. Hopefully someone will come in with a solution. I'm still trying

[@fendtarena2893]

Did you find any solutions?

[@naveedhussain6309]

@@manuelhernandez2017 me too bro, got any solution?

[@finiamh5032]

Check if the card is enable in device manager. If its not then enable it. If that doesnt solve your problem then your card might not be reviveable.

[@fendtarena2893]

I fixed this error. If you have a second bios on your card, boot it with the functioning bios. While in dekstop, switch to the bricked bios, flash it to the default and then restart your pc.

[@santiagomanassero5040]

error 0FL01 what this?

[@NMartin3]

yes it worked i followed your steps thanks you have a +1 subs

[@F7GOS]

Glad to be of help! Now get back to gaming on that Fixed 270X and feel free to share the video on social media if anyone else you know needs help with their GPU

[@StephenFong]

Hi, so I bricked my RX 480 by flashing the wrong BIOS. I followed the step to change the default GPU to IGD then I tried booting with the bricked GPU but the system doesn't boot. Would you mind helping me? Thanks!

[@F7GOS]

+Music sometimes gpu overrides the IGD, there's often a setting hidden In the bios to stop that. What motherboard do you have?

[@StephenFong]

F7GOS MSI Z170-A PRO, Amazon link: amzn.to/2nPjEjo

[@geejones3365]

life saver dude, bricked my 270X and this sorted it out. also gave it a clean with yor other video guide! thanks!

[@F7GOS]

No Problem ;) I guess if at least one person is helped then it was more than worthwhile making the video.